Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Jason 98 TA
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro Issues / Problems | Warranty Discussions | TSB and Recalls


Reply
 
Thread Tools
Old 10-08-2018, 09:14 AM   #15
JerTM

 
JerTM's Avatar
 
Drives: 2011 2SS/RS M6
Join Date: Oct 2015
Location: Utah
Posts: 1,801
It sounds like to me that you have one of the items utilizing the 5v reference pulling it down or you have an intermittent short to ground. Changing to an adjustable master may have upset the clutch switch. These are the hard issues to track down as it has to be currently broken during the test. Good luck.
JerTM is online now   Reply With Quote
Old 10-08-2018, 06:15 PM   #16
BandRcAMARO
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2016
Location: Michigan
Posts: 203
Clutch sensor isnt part of the 5v circuit though, wonder if it still could be a problem??
__________________
2010 Camaro 2SS/RS
BandRcAMARO is offline   Reply With Quote
Old 10-09-2018, 10:33 AM   #17
JerTM

 
JerTM's Avatar
 
Drives: 2011 2SS/RS M6
Join Date: Oct 2015
Location: Utah
Posts: 1,801
Quote:
Originally Posted by BandRcAMARO View Post
Clutch sensor isnt part of the 5v circuit though, wonder if it still could be a problem??
It is in a 5v group, but not the same group that is reporting the failure which is 5v1. The clutch pedal position sensor is on 5v2. Your gas pedal sensor #2 is on 5v1 however. It's possible you have an issue with the accelerator pedal position sensor or wiring. Might not hurt to take another good look at the wiring under the dash to make sure you haven't grounded out the APP wiring. Love looking for intermittents, so much fun.


Pm your e-mail, I have a document from SI with this dtc that may be worth looking into for you.

Last edited by JerTM; 10-09-2018 at 11:48 AM.
JerTM is online now   Reply With Quote
Old 10-09-2018, 11:11 AM   #18
TooCool5


 
TooCool5's Avatar
 
Drives: 2010 Camaro 1LS 3.6 LLT V6 325 HP
Join Date: May 2009
Location: LS
Posts: 4,128
Check for loose sockets on the connectors. Tighten up with tiny screwdriver see how it goes.
__________________
2010 Camaro Auto, Inferno Orange, Titanium Interior, Gearhead Wheels AIRAID CAI
TooCool5 is offline   Reply With Quote
Old 10-11-2018, 09:01 PM   #19
BandRcAMARO
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2016
Location: Michigan
Posts: 203
What do u mean by sockets?
__________________
2010 Camaro 2SS/RS
BandRcAMARO is offline   Reply With Quote
Old 10-12-2018, 07:05 AM   #20
BandRcAMARO
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2016
Location: Michigan
Posts: 203
Quote:
Originally Posted by JerTM View Post
It is in a 5v group, but not the same group that is reporting the failure which is 5v1. The clutch pedal position sensor is on 5v2. Your gas pedal sensor #2 is on 5v1 however. It's possible you have an issue with the accelerator pedal position sensor or wiring. Might not hurt to take another good look at the wiring under the dash to make sure you haven't grounded out the APP wiring. Love looking for intermittents, so much fun.


Pm your e-mail, I have a document from SI with this dtc that may be worth looking into for you.
I took my driver seat out and was laying under the dash looking for anything visible. Nothing sticks out besides when I pulled back the wrapping on the wire bundle I found some wires with tape on them? Not sure if its factory of if previous owner spliced into them.
__________________
2010 Camaro 2SS/RS
BandRcAMARO is offline   Reply With Quote
 
Reply

Tags
clutch pedal travel sensor cpp, p0641, reduced engine power

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:11 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.