Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
SDTW Custom Wheels & Tires
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis


Reply
 
Thread Tools
Old 05-18-2010, 08:25 PM   #1
RetiredRacer
 
Drives: 2LT RS ABM
Join Date: May 2010
Location: SE Michigan
Posts: 15
SS Brake Upgrade on 2LT

Have decided to take the "big brake" plunge and am just about done collecting the necessary parts to upgrade to the SS Brembo's on my 2LT. I've read / heard that replacing the rear dust shields is a PITA, and that most folks just trim their existing shields. Has anyone actually replaced the rear shields with the SS parts, and, if so, how bad a job was it? Just looking at my car, its hard to figure exactly how difficult / how long a task it would really be. I don't mind spending a few extra dollars and a couple more hours to keep it looking "factory", but I don't want to get into a weekend long project requiring special tools and resulting in busted knuckles just to replace the shields.

Thanks in advance!
RetiredRacer is offline   Reply With Quote
Old 05-19-2010, 07:28 AM   #2
01pewterz28
Camaro Junkie
 
01pewterz28's Avatar
 
Drives: 2017 HBM 2SS Convertible A8
Join Date: Aug 2008
Location: CENTRAL FLORIDA
Posts: 9,919
IMHO cut the shield when we looked at doing that before cutting it appeared we needed to drop the rear end and remove a ton of parts IMHO not worth the time just trim it, clean up the trim job and paint the dust shield and install the rotors.

Sean
__________________
**FIFTY HBM 2SS VERT**
01pewterz28 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trade my black 2LT facia for your black SS racer50200 Exterior Parts & Accessories 2 02-27-2010 09:21 PM
2010 Camaro SS Brembo Heavy Duty Cross Drilled Brake Rotors In Stock Ready To Ship Tim@Lingenfelter Suspension / Chassis / Brakes 4 12-07-2009 08:26 PM
5th Gen OEM Fit SS Brake Lines JusticePete Suspension / Chassis / Brakes 5 12-01-2009 10:56 AM
2010 Camaro Brembo Sport Disc Brake Upgrade available from INTENSE Todd @ INTENSE Suspension / Chassis / Brakes 2 11-24-2009 10:30 PM
Brake upgrade 96CAMaro Wheels and Tires Talk Sponsored by The Tire Rack 28 06-03-2009 01:44 PM


All times are GMT -5. The time now is 08:54 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.