4 post lift reputable brand

[72 Z27]

Originally Posted by hkittrell

Nice 25th Anniversary up top

I think you meant 30th Anniversary.....

I have the Atlas 408-SL from Greg Smith and have been pleased with it.

[72 Z27]

My Atlas 408-SL

[SIM GhostrdrZ]

Very nice. The cars and lift are ok as well. But that golf cart is awesome.
But seriously, I’m jealous. Great set up.

[Two_Tall]

Originally Posted by 72 Z27

My Atlas 408-SL

How close is the mirrors when parking 5th gen under lift ? Looking for a lift to buy

[X77-69z28]

I got the Backyard Buddy extra tall as I’m 6’3” from Advantage lifts. Came with the casters to wheel it around the shop. From what I’m told, Backyard Buddy is the only one made in America.
Buddy

[72 Z27]

Originally Posted by Two_Tall

How close is the mirrors when parking 5th gen under lift ? Looking for a lift to buy

I don't have an exact measurement but 3-4" on each side to the support columns. For a 5th gen Z, I would recommend an extra wide type 4 post. The tightest clearance on my 4 post is clearing the tire/wheel while pulling on/off the runners to the pulley covers for the braided wire rope in each column. My tires hang off the runners about 1" on each side....these cars are wide.

[ZED/28]

Originally Posted by 72 Z27

I don't have an exact measurement but 3-4" on each side to the support columns. For a 5th gen Z, I would recommend an extra wide type 4 post. The tightest clearance on my 4 post is clearing the tire/wheel while pulling on/off the runners to the pulley covers for the braided wire rope in each column. My tires hang off the runners about 1" on each side....these cars are wide.

Is your Atlas 408SL considered extra wide? I like yours and looking for a lift as well

[CamayroZ]

Originally Posted by 72 Z27

I don't have an exact measurement but 3-4" on each side to the support columns. For a 5th gen Z, I would recommend an extra wide type 4 post. The tightest clearance on my 4 post is clearing the tire/wheel while pulling on/off the runners to the pulley covers for the braided wire rope in each column. My tires hang off the runners about 1" on each side....these cars are wide.

This is really good advice. If you have room, purchase the wider 4-post.

I bought mine 25 years ago, Rotatry’s new lineup at the time, they were made in the US. It has held-up well. I also have 2 two-post Rotary made in US.

[72 Z27]

Originally Posted by ZED/28

Is your Atlas 408SL considered extra wide? I like yours and looking for a lift as well

No, the Atlas 408-SL is the standard width. If sticking with the Atlas brand, the 409-HP is similar but extra wide and extra tall.

[ZED/28]

Originally Posted by 72 Z27

No, the Atlas 408-SL is the standard width. If sticking with the Atlas brand, the 409-HP is similar but extra wide and extra tall.

great thank you!