03-04-2011, 10:10 PM | #1 |
Drives: 2SS/RS Join Date: Jul 2009
Location: St. louis
Posts: 161
|
FS: BMR Lowering Springs
Long story, but the short version is I ordered a set of BMR springs and ended up with two sets, and yes I paid for both sets. So being that I only need one set of Springs I looked into returing the second set. With me paying shipping and restocking fees I figured someone local would like to gain from my loss. They are unopened in the box. The kit is the SP019 kit which is a 1" drop in all 4 corners. The link to more details....
http://www.bmrsuspension.com/index.c...&productid=836 And if you need any help installing, seeing that I just went through it, I am more than willing to help. Asking 230 for the set. Thanks, |
03-07-2011, 09:07 AM | #2 |
2ss Black on Black M6
|
Genevieve have you installed springs on your car yet? I was just wondering what you thought about the feel of the car now. I have a set and I am on the fence about installing them. I love the look of the car lowered but I am not to keen on the cars ride being overly harsh.
__________________
|
03-07-2011, 09:21 AM | #3 |
Account Suspended
Drives: 89 IROC 350 Join Date: Mar 2009
Location: Back roads, southern Ohio
Posts: 12,504
|
It's a great ride PAINT. I have lowering springs and sways. Throw them bad boys on!
|
03-07-2011, 09:59 AM | #4 |
|
I have the BMR 1" drop springs on all 4 corners. In normal driving and normal size bumps I and my wife do not perceive any increased harshness. I guess it is possible to hit a large enough bump that would allow the struts and shocks to hit the bump stops with the 1" drop springs before the same bump would with the stock ride height springs. I haven't run into that at least not yet. Also, although the springs are rated at 1" drop, my particular car ( and I suspect most others ) saw a drop of ~ 1 1/8" all around after everything settled. The BMR springs are top notch and the improvement and handling as well as looks are hard to beat.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|
03-07-2011, 12:34 PM | #5 | |
Drives: 2SS/RS Join Date: Jul 2009
Location: St. louis
Posts: 161
|
Quote:
|
|
03-11-2011, 07:13 PM | #6 |
Drives: 2SS/RS Join Date: Jul 2009
Location: St. louis
Posts: 161
|
Sold!
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1 inch and 1.4 inch BMR Lowering Springs Now Available At APEX Motorsports!!!!!!!!!!! | Apex Motorsports | Suspension / Chassis / Brakes | 273 | 04-25-2016 05:17 PM |
BMR Lowering Springs - How It's Made | BMR Suspension | Suspension / Brakes / Chassis | 40 | 06-22-2010 10:32 AM |