04-18-2012, 04:22 PM | #1 |
|
New Parts are Installed with Pics
I am pleased with the look and feel of my Camaro after new parts were installed. Parts list below with Pics !!
Qty. 2 - Weld RTS Wheel, Aluminum, Polished, 17 in. x 10 in., 5 x 120mm Bolt Circle, 7.200 in. Backspace Qty. 2 - Weld RTS Wheel, Aluminum, Polished, 17 in. x 5 in., 5 x 120mm Bolt Circle, 2.200 in. Backspace Qty. 2 - Hoosier 18157 Drag Slick, 28.00 x 10.00-17, Bias-Ply, Solid White Letters, D06 Compound Qty. 2 - M&H Racemaster Front Runner, 28.00 x 4.50-17, Bias-Ply, Blackwall Qty. 1 - GForce Race Harness, Complete, Camlock Qty. 1 - Driveshaft Shop Manual DSS 9'' Independent Rear Conversion Kit w/ 3.70 Gears with 1-Piece Aluminum Driveshaft Qty. 1 - Pair of BMR TCA029 - Lower Control Arms, Rear, Adjustable, Polyurethane Bushings Qty. 1 - RJS Driving Suit, One-Piece, Single Layer, Proban, Black with White Stripe Both BMR Rear Lower Adjustable Control Arms Front and Rear BMR Adjustable Sway Bar End Links Pfadt Solid Rear Subframe Bushings Now to go RACING !! |
04-18-2012, 04:24 PM | #2 |
|
very nice, I love the wheels
__________________
Jannetty Racing JRE Street Package
|
04-18-2012, 04:24 PM | #3 |
Drives: Drives a 2012 IOM 2SS/RS 6M Join Date: Nov 2008
Location: South Jersey
Posts: 4,860
|
Very nice wheels
__________________
CAMARO 2SS/RS 6M
|
04-18-2012, 04:34 PM | #4 |
|
Keith, your car looks awesome!!! Welcome to the Weld Family!!! I see you even got those lugs I recommended too! Sweet! I just wish I had the $$$ to do the rear end and subframe bushings like you did!!! Someday....
Hope to see you down at the Super Chevy Show on May 12th!!! |
04-18-2012, 04:36 PM | #5 |
Charter Circle Member
Drives: 427 LSX- with TWINS Join Date: Jan 2007
Location: Back in Michigan!! Do miss ATX and my Tejas friends
Posts: 2,745
|
goood god...
very awesome keith.... i didnt know you could do 17s and slicks without having to swap out the rear brakes.... if i had known that I would have reevaluated my track wheels! |
04-18-2012, 04:38 PM | #6 |
Boosted Moderator
|
Bro, between you and Kyle and I, we got some stuff... Lots of the same parts...
I'm not quite as far along as you, but I'm getting there... Very nice looking... and I know it's very fast as well... car you have there... Can't wait to see it in person again...but mostly can't wait to see you and your lovely wife....
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
04-18-2012, 04:38 PM | #7 |
Boosted Moderator
|
Kyle, I have the same wheels, but mine have the black faces...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
04-18-2012, 04:41 PM | #8 | |||
|
Quote:
Quote:
Quote:
|
|||
04-18-2012, 07:37 PM | #9 |
chevy pride
|
that is bada$$ love it man keep up the good work
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
04-18-2012, 07:48 PM | #10 |
|
|
04-18-2012, 07:56 PM | #11 |
Drives: cts-v Join Date: Dec 2011
Location: Mooresville, NC
Posts: 506
|
Awesome! That car looks like the front wheels belong in the air!
__________________
|
04-18-2012, 07:59 PM | #12 |
|
|
04-19-2012, 08:06 AM | #13 |
Drives: 2010 1SS Join Date: Jan 2010
Location: Tampa, FL
Posts: 1,002
|
Looking Good!!
|
04-19-2012, 12:02 PM | #14 |
|
|
|
|
|
|