3 - Used 2010-2015 ADM LSA Supercharger kit-$3750

[ADM PERFORMANCE]

I am selling our perfect working condition ORIGINAL PROTOTYPE ADM LSA TO LS3 SUPERCHARGERS - Superchargers have less that 10k miles on them,Some parts included will be brand new(See list)

THIS IS FOR 2010-2015 CAMARO SS ONLY!This is a working kit for Ls3-L99 cars,You are not required to change the ac compressor, alternator, water pump, throttle body or wiring harness.

Expected gains with stock pulleys - 9-10 psi 100-150 rwhp. Headers and cam will add additional rwhp.


Here is the list of new and used parts you will receive:
101-0-LSA -LSA Supercharger with solid isolator and stock pulley
101-1-bkt -ADM LS3 to LSA Idle Conversion Bracket - New
101-2-bkt - LSA Tensioner Bracket - New
101-3-bkt - Intercooler Pump Bracket - New
101-4-pump - Intercooler Pump - New
101-6-lines - Water Lines,Resivoir,clamps*- New
101-22-harn - Pump Harness - New
101-8-rail - ZL1 Fuel Rail - New
101-13-lid - ZL1 Supercharger Lid - New
101-13-idl6 - 6 Rib idler pulleys x 2 - New
101-17-spcrs - Spacers for Bracket - New
101-19-belt - 6 rib supercharger belt - New
101-20-blt 10mm - 10mm bolts 10mmx35mm - New
101-21-tensio - Tensioner - New
101-23-line - evap line - New
101-26-evap - evap solenoid - New
101-23-wire - wire,solder,heatshrink to extend evap wire - New
101-25-wire - wire ,solder,heatshrink to extend throttlebody - New
101-29-wire - wire,solder,heatshrink to extend map sensor -New
101-27-bbh - Brake booster hose - New
101-28-he - ZL1 Heat exchanger (requires simple custom brackets not supplied)
101-30-6mm - supercharger bolts for mounting sc to cylinder heads - New
102-1-gask - Orange square supercharger lid gasket - New
102-2-tgask - Throttlebody Oring Gasket - Used
102-3-pvc1 - LSA Pcv Pipe for ZL1 - New
102-9-adm - ZL1 Intake - Used
102-10-hose - PCV Loop Hose - New
102-11-vac - 1/8" Vac cap - New
102-12-inj - Stock LSA Injectors - Used

Price is $3750.00 ea or find 2 friends and get them all 3 together for $9000.00

Other items recommended but not required to complete the install.
LSA Valve covers -$250
ADM FPCM - $225
ZL1 Fuel pump - $259
1000cc Injectors - $450 with your cores
ADM 2 piece pulley - 2.38" or 2.50" - $125
Instructions - $100

We accept Paypal only.Please email me for info as I may not see your post here.
admperformance@gmail.com

[ADM PERFORMANCE]

[That_Guy]

Is the IW balancer required, or can these be used with a stock ls3 balancer?

[CAmaroUSNgm]

I need 2 friends :(

[CAmaroUSNgm]

Anyway of getting this without my friends and will u sell without the blower I have that already

[ADM PERFORMANCE]

Originally Posted by That_Guy

Is the IW balancer required, or can these be used with a stock ls3 balancer?

Stock balancer. We do not recommend innovators west 8 rib as it takes special alignment

[ADM PERFORMANCE]

Originally Posted by CAmaroUSNgm

Anyway of getting this without my friends and will u sell without the blower I have that already

Let me work on that. Can I call you today?

[hammdo]

Work with an ATI balancer on an L99 -- aslo have the original 1LE strut bar - will that need to be replaced? Have 3.91 gears also -- will those have to go?

Thanks!

-Don

[Fish-man]

email sent. awaiting reply

one additional question... same as one above, would you sell the kit w/o the blower itself?

[ADM PERFORMANCE]

Originally Posted by Fish-man

email sent. awaiting reply

one additional question... same as one above, would you sell the kit w/o the blower itself?

Working on it right now.

[ADM PERFORMANCE]

Originally Posted by Fish-man

email sent. awaiting reply

one additional question... same as one above, would you sell the kit w/o the blower itself?

Replied

[62nalide]

Originally Posted by CAmaroUSNgm

I need 2 friends :(

I'll be a friend lol

[ADM PERFORMANCE]

Only 1 left at this price.

2 have been spoken for so the last one will be it and then they are all gone.

[62nalide]

One's mine suckas!