12-05-2016, 02:15 PM | #1 |
Account Suspended
Drives: 2013 1LE Join Date: Jan 2013
Location: Mass
Posts: 162
|
1LE suspension components
Sold!
I've replaced a few of the suspension components on my 1LE (FE6) and I need to make some room in my garage. Here is a list of what's available. I would love to sell it all together for someone looking to upgrade an SS or similar. Car had 25,000 on it when removed with no corrosion to note. Car was never driven in winter. I have a Cruze to daily drive. 1. Front struts and rear shocks with Hotchkiss 1" lowering springs. 2. Rear lower control arms 3. Rear anti sway bar with end-links. 4. Rear trailing arm. 5. Rear tow rod. 6. Front anti sway bar and end-links. All for $650.00 shipped CONUS. Make an offer if you think that's not fair. ~Abdi Last edited by Abdi; 01-03-2017 at 08:11 PM. Reason: Sold everything. |
12-28-2016, 08:50 AM | #2 |
Drives: 2014 V6 white Join Date: Jan 2015
Location: United States
Posts: 183
|
Willing to seperate parts or still package only?
__________________
2014 LFX M6.
Engine Mods: 80mm throttle body, Jac Fab Intake Spacer and Ported Manifold, Injen CAI, Apex cathc can, Dyno Tune by Performance Dyno NH. Driveline: 1LE Diff, MGW Short Throw Shifter. Suspension: 1LE front and rear sways. Pedders adjustabale endlinks, 1LE front and rear struts with Hotchkis Sport springs. Appearance: Painted engine cover & fuse box cover, Satin Black SS 20's, full IOM interior, ZL1 spoiler, Matte Black Stripes Sound: Alpine 12in type R, sealed box, 1200 watt mono amp. |
12-28-2016, 07:23 PM | #3 |
Account Suspended
Drives: 2013 1LE Join Date: Jan 2013
Location: Mass
Posts: 162
|
|
12-29-2016, 12:20 AM | #4 |
Drives: 13 Black SS Join Date: Aug 2014
Location: South Carolina
Posts: 46
|
How much for the factory front struts
|
12-29-2016, 08:42 PM | #5 |
BowtieBelle's SS
Drives: 2010 Camaro SS Join Date: Jan 2012
Location: Perry, ok
Posts: 1,074
|
Interested in rear struts only. Price please
__________________
|
12-30-2016, 12:15 PM | #6 |
Account Suspended
Drives: 2013 1LE Join Date: Jan 2013
Location: Mass
Posts: 162
|
Right now MJF12080 has placed an offer for the struts and springs so I'll work with him to get these done.
If the struts and springs sell I will have the rear LCA's, toe rods, trailing arms, front and rear sway bar with end links available. Cheers! |
01-01-2017, 03:14 AM | #7 |
Ah DJ-IOM ZL1 haha
Drives: 13 IOM ZL1 M6 & 10 SIM 2SS M6 Join Date: Jul 2009
Location: Hope Mills, NC
Posts: 580
|
I am interested in both the front struts and rear shocks with springs. I know I'm in line but ready now. Thanks. Happy new year.
__________________
2013 IOM ZL1 #002415 Born 09/13/12
2010 SIM 2SS/RS #005549 Born 05/02/09 |
01-01-2017, 10:07 PM | #8 |
USA-1
|
How much for the toe rods?
__________________
"A Camaro in the garage is safe, but that's not what Camaros are built for..."
R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete |
01-02-2017, 06:54 PM | #9 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,063
|
How much for front sway bar?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
01-02-2017, 08:33 PM | #10 |
Account Suspended
Drives: 2013 1LE Join Date: Jan 2013
Location: Mass
Posts: 162
|
|
01-02-2017, 08:34 PM | #11 |
|
I have a like new front sway bar I just pulled off my car yesterday..PM me if you are interested in one...
__________________
Car mods: never enough!
|
01-02-2017, 10:46 PM | #12 |
USA-1
|
Abdi, what all did you upgrade to?
__________________
"A Camaro in the garage is safe, but that's not what Camaros are built for..."
R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete |
01-03-2017, 08:10 PM | #13 |
Account Suspended
Drives: 2013 1LE Join Date: Jan 2013
Location: Mass
Posts: 162
|
I have all Detroit Speed suspension components, except for the Ohlins Road and track coilovers. The JRI/DSE coilovers really push my budget over board, though I'm sure they are excellent quality in every sense of the word.
I have a separate thread in suspension that I should be able to update soon with lots more details on the Ohlins stuff. |
01-03-2017, 08:15 PM | #14 |
Account Suspended
Drives: 2013 1LE Join Date: Jan 2013
Location: Mass
Posts: 162
|
Thank you!
|
|
|
|
|