11-08-2009, 09:35 AM | #1 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
LS3+G6x3 cam+ND200 pills=POWER
Dynoed the car today at LG Motorsports after the clutch swap, damn man twice the power from the showroom floor and I still dont think it's enough. Fuel was rich on the nitrous tune and time was running out. Car has 4900 miles on it now.
On motor it made 495 rwhp, turned the bottle on and at 950 psi it made 700 rwhp and 784 torque. All on pump gas.......stock fuel system, no dedicated fuel tank as of yet, in the works as we speak.
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
11-08-2009, 09:51 AM | #2 | |
Drives: Getting 2010 Camaro Join Date: Jul 2008
Location: Vancouver
Posts: 1,149
|
Quote:
Not that it matters to me, but do you know what kind of fuel mileage your getting on the street with that camshaft? Wonder if that cam would go well with a blower? I'm very impressed bud!! 700 HP and 784 RWTQ is crazy conisdering the only change you've made internally is a camshaft!!! On pump gas none the less! Now get that sucker to the track!!!! Who did your tuning for the naturally aspirated power? |
|
11-08-2009, 10:01 AM | #3 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
Sam Miller tunes the car, LG makes a blower cam for the blower cars, this one will not work with a blower. My car made 360/373 bonestock and 393/393 tuned. All the bolt ons it made 427/427, after the cam swap the final numbers were 495/460. The cam has ben in it for some time now, just never dynoed it on spray.
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
11-08-2009, 10:02 AM | #4 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
the fuel milage is around 29.5-30.2 on the hwy, Im never in the city long enough to tell you there.
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
11-08-2009, 10:14 AM | #5 | |
Drives: Getting 2010 Camaro Join Date: Jul 2008
Location: Vancouver
Posts: 1,149
|
Quote:
|
|
11-08-2009, 10:15 AM | #6 | |
Drives: Getting 2010 Camaro Join Date: Jul 2008
Location: Vancouver
Posts: 1,149
|
Quote:
guess it could also be the tune as I hear the stock LS3's are quite rich from the factory? |
|
11-08-2009, 10:19 AM | #7 |
Drives: Getting 2010 Camaro Join Date: Jul 2008
Location: Vancouver
Posts: 1,149
|
Do you have some contact info for Sam Miller?
|
11-08-2009, 10:30 AM | #8 |
Drives: 2010 RS/SS2 Join Date: Jul 2009
Location: Forney
Posts: 724
|
I dont know if he is a member here but Yes, I do.
__________________
2010 SS/RS SIM
First to run 11's (11.83)on a stock long block. First to run 11's cam only First to run 11's all motor First to run 10's (10.96) and did it with a 100% bonestock long block and a power adder (nitrous) First to run 10's (10.55) on motor in 2010 Camaro First to break into the 5's (5.97) 1/8th mile First to cut a 1.5X sixty foot First to cut a 1.4x sixty foot First to car to cut a 1.3x 60ft |
11-08-2009, 12:03 PM | #9 |
Drives: Getting 2010 Camaro Join Date: Jul 2008
Location: Vancouver
Posts: 1,149
|
|
11-08-2009, 12:24 PM | #10 |
Drives: '10 Camaro SS Join Date: Apr 2009
Location: Gilbert, Arizona
Posts: 1,047
|
OMG! 900 crank ft.lbs on the stock internals...
Where are all those GT500 benchracers now... Love how you back everything up on the track...keep up the good work!
__________________
2010, SIM, 2SS/RS, LS3, CGM Stripes
|
11-08-2009, 03:20 PM | #11 |
Drives: LSx Powered Join Date: Oct 2009
Location: 19804
Posts: 448
|
Nice numbers. Can you post up the graph?
|
11-08-2009, 04:48 PM | #12 |
Pat @ ADM PERFORMANCE
Drives: CGM SS/RS M6 Join Date: Aug 2009
Location: Prosper, TX
Posts: 506
|
HOLY FUGGIN HORSEPOWER BATMAN!!!!!!
__________________
"old age and treachery will always overcome youth and ambition" author unknown "There are two types of racers: cheaters...and losers." Smokey Yunick |
11-08-2009, 05:06 PM | #13 |
P90X
Drives: 2000 SLP SS VERT Join Date: Jul 2009
Location: Oklahoma
Posts: 773
|
AWESOME
__________________
2000 Camaro SS/SLP
P90X changed my life. Want to know more, PM me for more info on changing your life for the better |
11-08-2009, 06:09 PM | #14 |
Account Suspended
|
Those are some great numbers; do you have a printout of the dyno you can share? I'd be interested to know at what RPM it's making those peak numbers. How much power under the curve?
In any case, that car is going to be wicked at the track. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Official 1/4 Mile (V8) 2010+ Camaro Fast List | Merc | Dragstrip and Launch Techniques Discussion | 3652 | 08-17-2023 02:50 PM |
LS3 CAM AND HEADERS DYNO | ADM PERFORMANCE | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 53 | 02-13-2016 06:15 PM |
Cam basics | CamaroSpike23 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 76 | 11-25-2015 11:42 AM |
LS3 engine specifications | Tran | Wiki | 3 | 10-06-2010 10:56 PM |
Check your Order here | bvonscott | Camaro Price | Ordering | Tracking | Dealers Discussions | 665 | 06-29-2009 01:00 PM |