02-21-2016, 05:00 PM | #1 |
Drives: 2012 2SS/RS Join Date: Jul 2012
Location: Central IL
Posts: 901
|
who sells zl1 pedal covers now?
Trying to find a set of zl1 pedal covers for my car. I know at one point a vendor on here was selling them, but having a hard time finding it now. Anyone have a link? thanks
__________________
My Build thread! http://www.camaro5.com/forums/showthread.php?t=317027
|
02-21-2016, 05:06 PM | #2 |
Drives: 2015 Bright Yellow 6-Speed Manual Join Date: Sep 2014
Location: Turlock, CA
Posts: 117
|
__________________
|
02-21-2016, 07:16 PM | #3 |
Drives: 2014 2SS/RS Join Date: Dec 2014
Location: Raleigh, NC
Posts: 1,053
|
They are excellent - look sharp with the brushed trim on them, really stand out. If you get them from your local dealer they may price match internet and also no shipping charge. They were in stock at my local dealer.
Replaces the entire accelerator pedal assembly and then two slip on covers for the brake and clutch (if manual set is purchased). Easier to install over brake pedal if the cover is heated up first with hair dryer to make more flexible ... and then I used a small flat blade to work the edge around the steel pedal. Took about 10 minutes each - it is cramped down there. Ron
__________________
2014 2SS/RS, Z28 CAI and High Wing Spoiler, ZL1 5.1:1 Ratio Short-Throw Shifter, ZL1 Pedals, ZL1 splash guards, NPP Dual-mode quad tip exhaust, Z28 strut tower brace, Camaro LED Cup-holders with footwell Lighting option, Leather visors, and Leather E-brake boot. Chevy dealer sponsored 67 retro SS nose stripe package.
|
02-21-2016, 07:36 PM | #4 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
I have them too, love them. I took off the stainless cover on the brake pedal, put the new rubber on the brake, then superglued the stainless back on. Took 2 minutes to put the brake pedal on. 2 years and no problems...
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
02-21-2016, 10:11 PM | #5 |
Camaro CRAZY
|
eBay? I really like these as well!
http://www.ebay.com/itm/GM-22826305-...xR~BOA&vxp=mtr |
02-22-2016, 05:11 PM | #6 |
Drives: 2012 2SS/RS Join Date: Jul 2012
Location: Central IL
Posts: 901
|
Thanks everyone for the feedback. Anyone did anything for their dead pedal?
__________________
My Build thread! http://www.camaro5.com/forums/showthread.php?t=317027
|
02-22-2016, 05:33 PM | #7 |
|
Not sure if this is what you're looking for, but i have these Sullivan racing pedals.
http://www.srpracing.com/
__________________
|
02-22-2016, 07:01 PM | #8 |
Drives: 2011 RS Join Date: Apr 2011
Location: Florence New Jersey
Posts: 1,125
|
|
02-22-2016, 09:24 PM | #9 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
Dead pedal
http://www.camaro5.com/forums/showpo...&postcount=449 http://www.camaro5.com/forums/showpo...&postcount=450 -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
02-23-2016, 07:44 AM | #10 | |
Drives: 2012 2SS/RS Join Date: Jul 2012
Location: Central IL
Posts: 901
|
Quote:
__________________
My Build thread! http://www.camaro5.com/forums/showthread.php?t=317027
|
|
|
|
|
|