12-11-2017, 12:59 PM | #1 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
SBE L99 Goes 9.46 146 with JRE parts and tuning
I was asked to post this over here as well.
Congrats to 94guy, with his 2010 Camaro L99 known as the Yellow Destroyer. JRE has been working with 94guy since 2011 providing parts and remote custom tuning to make this all happen Stock bottom end L99 Whipple supercharger on MS109 JRE Cam package JRE spec Torque converter JRE 6l80E trans build JRE 3.45 Differential package. JRE custom tuning Via SCT. J is a hoot to work with and we have become very good friends over the years, this is a guy who goes to the track only 2 or 3 times a year. We work well as a team, and now just crushed the SBE L99 record to my knowledge.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
12-11-2017, 09:56 PM | #2 |
Nice
If ya do not mind what wheels are those. Also what RPM is that thing shifting with the stock bottom end? Last edited by Slickcas; 12-11-2017 at 10:40 PM. |
|
12-12-2017, 07:03 AM | #3 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Weld RTS, we are going to keep that one close to our chest.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
12-12-2017, 07:17 AM | #4 |
Drives: Maggie blown LS3 vette Join Date: Aug 2009
Location: SE TX
Posts: 1,490
|
That's gettin' it done. Congrats to both of you!
|
12-12-2017, 08:13 AM | #5 |
Drives: Twin turbo G8 GXP Join Date: Dec 2012
Location: MD
Posts: 454
|
Stall speed?
__________________
9.88 @ 144
https://youtu.be/nN0rz1RAcJw |
12-12-2017, 08:16 AM | #6 |
Drives: Silver 2010 SS Camaro Join Date: Jul 2009
Location: TN
Posts: 2,562
|
Great pass and great work! Love seeing a Whipple kicking some butt.
__________________
MODS:
ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq |
12-12-2017, 08:17 AM | #7 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Thank you
Let me just say there is way more to a torque converter than stall speed.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
12-12-2017, 08:33 AM | #8 | |
Drives: Twin turbo G8 GXP Join Date: Dec 2012
Location: MD
Posts: 454
|
Quote:
__________________
9.88 @ 144
https://youtu.be/nN0rz1RAcJw |
|
12-12-2017, 08:46 AM | #9 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,966
|
It's a custom (kinda tight) built triple disk from JRE. I cant seem to get the car to hook. I roll into the throttle most of the way in first gear based on my log. I have a 9.51 run from the same day that spun bad. I'm thinking about putting a taller tire (29") or putting the stock 3.27 back in. It has the 3.45 now.
__________________
2018 Camaro SS A8 Edelbrock 2650 FBO 93 octane 9.54@144 Pump E 9.59@152
2010 Camaro Stock bottom end with 46,000+miles JRE remote tuning Whipple A6 and Drive it to and from the track 9.46@146 |
12-12-2017, 08:50 AM | #10 |
Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011
Location: Houston
Posts: 1,391
|
That is a NICE run!! Congrats.
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile |
12-12-2017, 09:06 AM | #11 |
Drives: Twin turbo G8 GXP Join Date: Dec 2012
Location: MD
Posts: 454
|
> Can't hook.
> 1.43 60'. Pick one.
__________________
9.88 @ 144
https://youtu.be/nN0rz1RAcJw |
12-12-2017, 09:12 AM | #12 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,966
|
the car has been 1.37-1.38 but evry time I get that 60ft the track tends to get loose right after the 60ft VERY FRUSTRATING
__________________
2018 Camaro SS A8 Edelbrock 2650 FBO 93 octane 9.54@144 Pump E 9.59@152
2010 Camaro Stock bottom end with 46,000+miles JRE remote tuning Whipple A6 and Drive it to and from the track 9.46@146 |
12-12-2017, 09:15 AM | #13 |
Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011
Location: Houston
Posts: 1,391
|
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile |
12-12-2017, 12:01 PM | #14 |
Drives: Twin turbo G8 GXP Join Date: Dec 2012
Location: MD
Posts: 454
|
I 60' 1.8x, so you'll get no sympathy from me.
__________________
9.88 @ 144
https://youtu.be/nN0rz1RAcJw |
|
|
|
|