07-18-2009, 02:16 AM | #1 |
Drives: purple hhr 1lt Join Date: Mar 2009
Location: poconos pa
Posts: 19
|
hennessey v6 intake
just saw the hennessey v6 intake on ebay.its ugly, but hopfully it makes hp.ill try to get link and edit http://cgi.ebay.com/ebaymotors/2010-...A1%7C72%3A1171
|
07-18-2009, 09:53 AM | #2 |
2G1FF1EV0A9113319
|
Yeah, that is a bit ugly, isn't it? I found the description woefully lacking.
__________________
2010 Camaro 1LT/RS M6 Black
1100: 10/13/2008 2000: 4/02/2009 3000: 4/08/2009 3300: 5/14/2009 3400: 5/21/2009 3800: 5/28/2009 VIN: 2G1FF1EV0A9113319 4000: 5/28/2009 4150: 5/28/2009 4B00: 5/28/2009 Delivered: 6/10/2009 |
07-18-2009, 12:05 PM | #3 |
Black Ice
Drives: 2SS/RS Black w/ silver ice stripes Join Date: Jul 2009
Location: Pueblo,Co.
Posts: 898
|
I like it. Cold air kits unless they are chrome look plain yes but the advantage to this is it can be painted and if it is from Hennessey, you know it will perform. I say it will be worth it.
|
07-18-2009, 01:14 PM | #4 |
|
No horsepower rating
|
07-18-2009, 01:19 PM | #5 |
Looks like it could use a good painting!
__________________
SoCal Camaro5 Family Member |
|
07-18-2009, 06:05 PM | #6 |
San Diego Head Tuners
Drives: 2016 Camaro 1SS ,NPP,MagRide, A8 Join Date: May 2009
Location: Temecula, CA
Posts: 2,440
|
Looks lame
__________________
2016 1SS A8, NPP, MagRide, Black Rims
My 5th Camaro (3 Gen5, 1 Gen4) Member of San Diego Head Tuners https://www.youtube.com/c/MojaveKY https://www.instagram.com/mojaveky/ https://twitter.com/MojaveKY http://dinowax.refr.cc/bryanm 15% off DinoWax orders |
07-18-2009, 06:40 PM | #7 |
CamaroFans.com
|
They will pretty much build you anything/any color you ask for... No need to go to e-bay since they are here in the Forums anyway.
|
07-18-2009, 09:37 PM | #8 |
Drives: purple hhr 1lt Join Date: Mar 2009
Location: poconos pa
Posts: 19
|
it just looks weak, i mean look at the v8 intake its massive ,and chrome, and looks like muscle .this looks like a honda intake.i guess looks dont speak for numbers, so i hope the numbers are better looking and stronger then the piece looks.
|
07-21-2009, 11:34 AM | #9 |
We are finalizing all the test results from the R&D dept at this time. While the intake doesnt appear massive when you compare it side by side with our v8 intake system, it doesnt need to be. The purpose of a good intake is to get as much cool air as possible past the throttle body while the blade is open (Air Speed). We have achieved that with this intake! We had the test car here for over a week and tried various setups. This is the final prodcution piece that is also available for purchase at this time.
Speak to you soon. |
|
07-21-2009, 11:56 AM | #10 |
Drives: 2023 2SS Convertible Join Date: May 2009
Location: Metro Detroit
Posts: 1,061
|
For $500 John Hennessy better show up at my house in a Viper and personally install it.
-Geoff
__________________
'12 2SS RS Convertible - Traded in.
'16 2SS Convertible - White on white, mag-ride, NPP, nav. Sold! '23 2SS Convertible -Same as above except orange. |
07-21-2009, 12:52 PM | #11 |
.
Drives: ... Join Date: Apr 2009
Location: Colorado
Posts: 1,380
|
Well I went out on a limb and purchased this intake, I didn't want another massive piece of plastic in the compartment like the airraid and most likely the K&N. Plus I plan on getting it painted to match everything else I am doing in the engine compartment.
The fun part is seeing when they are going to ship it out. I had 6 emails and a couple phone calls between James and Dave. James is the Sales Manager and Dave is the General Manager. James said it would take 2-3 weeks to ship, Dave said it will ship in 48 hours. So we will see on how everything turns out. |
07-21-2009, 01:20 PM | #12 |
At this time, we are able to take pre-orders via phone. Give myself (James or Tyler) a call and we will input your order for the 2010 Chevrolet Camaro V6 Induction System. The Pre-order will get you on the order list for the intakes which are slated to begin shipping around August 5th. Why the time frame? We are ramping up the production and getting all the supplies instock to build these items as all of the Air Inductions including v8 are produced here at our location in TX.
Look forward to speaking to you soon, James |
|
07-21-2009, 03:55 PM | #13 |
Drives: mits lancer oz Join Date: May 2009
Location: shawnee
Posts: 196
|
How come this one for the v6 is 500 and the one for the v8 was going for 400 ?
|
07-21-2009, 04:17 PM | #14 |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AIR INTAKE FROM HENNESSEY | taspecs | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 26 | 07-14-2009 04:05 PM |
Hennessey 562HP Camaro package (HPE550) limited edition announced | Tran | 5th Gen Camaro SS LS LT General Discussions | 71 | 04-23-2009 10:20 AM |
Hennessey GTR600 | SS 376 | General Automotive + Other Cars Discussion | 3 | 04-02-2009 12:31 PM |
Hennessey 2010 Chevrolet Camaro 705-HP!! (HPE700) | Caliman93230 | 5th Gen Camaro SS LS LT General Discussions | 172 | 04-01-2009 06:12 PM |