08-29-2018, 04:06 PM | #1 |
Drives: 2010 SS Camaro Join Date: May 2017
Location: Oklahoma
Posts: 34
|
How much Horsepower is to much for 2010 Camaro ss tansmission
Right now im at 580-600 rwhp, but im going to change the exhaust and and do a flex fuel convention for e85. Which with them two will hopfully get me to around 680 to 700. The guy at the shop said that 600 to 650 rwhp "might" be to much for the transmission. Does anyone know? Also how much can the driveline and the axle hold.
I also have a new 3200 stall converter. Last edited by Firehawk321; 08-29-2018 at 04:16 PM. |
09-24-2018, 02:46 AM | #2 |
Drives: 2013 Camaro 2SS "Diablo" Join Date: Jan 2016
Location: California
Posts: 135
|
Transmission is rated for 600 I believe.
__________________
Diablo - 2013 Camaro 2SS
Mod List: GM NPP Dual mode exhaust(Fuse pulled), AGP Twin Turbo 54/57, ZL1 Fuel pump with flex fuel sensor, ADM FPCM, ID1000 Injectors, diamond racing forged pistons, BTR twin turbo cam stage 2, Lunati forged H beam rods, BTR trunnions, ARP head studs, Vararam power wedge, MightyMouse Wild catch can, PFADT 1.25" drop springs, BMR Strut tower brace, 20x10.5 Giovanna Mecca rear and 20x9 Giovanna Mecca fronts, R1 Concepts drilled and slotted rotors, Hawk HPS pads, Night Owl RGB halo kit, and more... Future Mods: Dual fuel pump and more... |
09-24-2018, 02:44 PM | #3 |
Drives: 2012 Camaro SS Join Date: Oct 2016
Location: Greeneville, TN
Posts: 187
|
Had to rebuild my 6l80e at around 580. Now its built for anything 5k later.
https://www.hotrod.com/articles/hrdp...parts-failure/ |
09-24-2018, 08:17 PM | #4 |
Drives: Miss Con Ception Join Date: Aug 2016
Location: Chicagoland
Posts: 2,999
|
Maximum engine power: 469 bhp (349 kw)
Maximum engine torque: 439 lb-ft (595 Nm) Maximum gearbox torque: 664 lb-ft (900 Nm)
__________________
2011 1SS/RS LS3 CGM
|
|
|
Thread Tools | |
|
|