True Demon and Angel Eye - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Unfkwthabl · 06-23-2013, 09:47 PM

I am currently retrofitting my brothers rs headlights and want to show a preview of the progress so far.. I have the demon and angel eye on one and just the angel eye on the other.. They are connected to a sound sensitive controller so you see them flash to the music..Here a link to the video.. More to come..

SoCalThug · 06-24-2013, 12:03 AM

Did you not install the demon eyes yet because I did not see them installed in the vid. Also wat is the difference between real and fake ones.

Unfkwthabl · 06-24-2013, 07:39 AM

A demon eye is when the projector lens lights up and an angel eye is when the halo light s up..Most people install 2 halos and call the smaller one a demon eye..

puertoricanfont · 06-24-2013, 07:47 AM

Good stuff. I originally tried doing the "real demon eyes" but failed. I have the mini h1 projectors and there is no place to install a led. The few places I found, the led burnt out within hours from the intense heat. So I opted to go with a smaller halo instead. I definitely want to see the progress on this and see how you did it, good work.

SoCalThug · 06-24-2013, 12:59 PM

Quote:

Originally Posted by Unfkwthabl

A demon eye is when the projector lens lights up and an angel eye is when the halo light s up..Most people install 2 halos and call the smaller one a demon eye..

Oh ok thanks for the info! I guess I have fake demon eyes then

Unfkwthabl · 06-24-2013, 01:42 PM

Quote:

Originally Posted by puertoricanfont

Good stuff. I originally tried doing the "real demon eyes" but failed. I have the mini h1 projectors and there is no place to install a led. The few places I found, the led burnt out within hours from the intense heat. So I opted to go with a smaller halo instead. I definitely want to see the progress on this and see how you did it, good work.

I originay tried the demon eye on my Mini H1s but could not keep the light to just the projector lens..The light kept reflecting off the back of the projector shroud..This setup will probably only work on the RS lights since the projector cover will not allow light to be reflected other then the projector lens..

Quote:

A demon eye is when the projector lens lights up and an angel eye is when the halo light s up..Most people install 2 halos and call the smaller one a demon eye..
Oh ok thanks for the info! I guess I have fake demon eyes then

Its not a true demon eye but still is an awesome dual halo setup..

Unfkwthabl · 08-29-2013, 06:28 PM

Finally found time to put my brothers car back together. The setup is a little different since rhe sound system was upgraded so the music box would only flash one color due to excessive noise.. I installed a wifi box so the lights can be controlled through any smartphone.

chevy 3 · 08-29-2013, 06:33 PM

Nice work. I like your setup

jesse454545 · 08-29-2013, 07:44 PM

What did you use to light up the projector with the same color as the halos? I am looking to buy some color shifts next week and would love to do this also

CamaroI · 08-29-2013, 07:56 PM

Curious what you are doing differently to get the glow?? Most with just angel eyes do not. However, I do prefer the look of a separate smaller ring

butters · 08-29-2013, 10:23 PM

Demon eyes...

Unfkwthabl · 08-29-2013, 11:48 PM

I mounted rgb leds inside the projector housing so that the projector bowl lights up and is reflected through the lens. Its probably easier to make your own kit with resistors. I put this kit together for a fraction of what the vendors are charging.

CamaroI · 08-30-2013, 07:01 PM

Quote:

Originally Posted by butters

Demon eyes...

This is what I am having done as well. Looks better IMO

agkelly73 · 09-12-2013, 09:32 PM

PM sent.

Sent from my zombie apocalypse bunker using my Droid RAZR HD.

06-24-2013, 07:47 AM	#4
puertoricanfont Drives: 2016 Camaro 2ss Join Date: Aug 2010 Location: Tampa, FL Posts: 1,623	Good stuff. I originally tried doing the "real demon eyes" but failed. I have the mini h1 projectors and there is no place to install a led. The few places I found, the led burnt out within hours from the intense heat. So I opted to go with a smaller halo instead. I definitely want to see the progress on this and see how you did it, good work. __________________

08-29-2013, 06:28 PM	#7
Unfkwthabl Drives: 2011 V6 Synergy Green Camaro Join Date: Apr 2011 Location: Wood Dale, IL Posts: 248	Finally found time to put my brothers car back together. The setup is a little different since rhe sound system was upgraded so the music box would only flash one color due to excessive noise.. I installed a wifi box so the lights can be controlled through any smartphone. Attached Images

08-29-2013, 10:23 PM	#11
butters Drives: 2010 2SS/RS L99 Join Date: Jul 2011 Location: Chicago, IL Posts: 1,139 View My Garage	Demon eyes... __________________

06-24-2013, 12:03 AM	#2
SoCalThug Drives: 2012 Summit White 1Ls Join Date: Jan 2012 Location: Diamond Bar, Cali Posts: 898	Did you not install the demon eyes yet because I did not see them installed in the vid. Also wat is the difference between real and fake ones.

06-24-2013, 07:39 AM	#3
Unfkwthabl Drives: 2011 V6 Synergy Green Camaro Join Date: Apr 2011 Location: Wood Dale, IL Posts: 248	A demon eye is when the projector lens lights up and an angel eye is when the halo light s up..Most people install 2 halos and call the smaller one a demon eye..

08-29-2013, 06:33 PM	#8
chevy 3 NEcamaro5 Drives: Black 2ss rs 1LE Join Date: Apr 2009 Location: mass Posts: 4,328 View My Garage	Nice work. I like your setup

08-29-2013, 07:44 PM	#9
jesse454545 Drives: 2011 CAMARO 2SS/RS Join Date: Feb 2013 Location: SAN DIEGO & TEXAS Posts: 345	What did you use to light up the projector with the same color as the halos? I am looking to buy some color shifts next week and would love to do this also

08-29-2013, 07:56 PM	#10
CamaroI Drives: 2010 IOM Camaro Join Date: Aug 2012 Location: DFW Posts: 3,112	Curious what you are doing differently to get the glow?? Most with just angel eyes do not. However, I do prefer the look of a separate smaller ring

08-29-2013, 11:48 PM	#12
Unfkwthabl Drives: 2011 V6 Synergy Green Camaro Join Date: Apr 2011 Location: Wood Dale, IL Posts: 248	I mounted rgb leds inside the projector housing so that the projector bowl lights up and is reflected through the lens. Its probably easier to make your own kit with resistors. I put this kit together for a fraction of what the vendors are charging.

09-12-2013, 09:32 PM	#14
agkelly73 Drives: 2016 SS Convertible Join Date: Jun 2009 Location: Hope Mills, NC Posts: 419	PM sent. Sent from my zombie apocalypse bunker using my Droid RAZR HD.