Z28 and the 5th Gen Refresh.

[thePill]

Originally Posted by WYKOFF69Z

See what it looks like if you remove the bowtie, and have smaller spokes on the wheels ( not as wide).

I can throw the stock chrome wheels back on it though, the spokes look thinner.

[anthonyj9h]

can you make em a lil thinner? and oh the exhaust come out on the side

[thePill]

Originally Posted by anthonyj9h

can you make em a lil thinner? and oh the exhaust come out on the side

The wheels are the last thing we will worry about, I am looking for SSX wheels that will fit. The original concept had side exhaust but I removed it, anyone that has seen how side exhaust is set up never wants it.

[anthonyj9h]

Originally Posted by thePill

The wheels are the last thing we will worry about, I am looking for SSX wheels that will fit. The original concept had side exhaust but I removed it, anyone that has seen how side exhaust is set up never wants it.

ssx wheels are good

[thePill]

This is where I'm gonna leave off for tonight, maybe try to work in the Jay Leno heat extractor hood a little later. I am really happy with the product so far, did some minor touch ups and replaced the concept side mirror with the stock one. I also repositioned the Z28 badge in the grille after the bowtie delete and re-sized it.

I will fool around with it tomorrow... I would love to hear what Number 3 thinks...

Edit: Current car attached for comparison.

[2cnd chance]

I'm not Number 3, but I'm diggin it.

[thePill]

Originally Posted by 2cnd chance

I'm not Number 3, but I'm diggin it.

It's really aggressive and looks very athletic, kind of like a 5th Gen went to the gym for cardio. This build has to be part of a refresh though, the entire car is smaller starting at the front fascia. The front fenders are not as tall as the current car, the rear end is about 3-4 inches shorter... I am going to see if I can get it a little more lean... Look at the front fender height compared to the current car, the fenders are about 2-3 inches (maybe more) shorter. This actually lowers the hood and makes outward windshield visibility better..

[anthonyj9h]

def

[Blizzard]

Originally Posted by thePill

This is where I'm gonna leave off for tonight, maybe try to work in the Jay Leno heat extractor hood a little later. I am really happy with the product so far, did some minor touch ups and replaced the concept side mirror with the stock one. I also repositioned the Z28 badge in the grille after the bowtie delete and re-sized it.

I will fool around with it tomorrow... I would love to hear what Number 3 thinks...

Not sure how functional that chin would be aero wise.

[Fightinfire921]

Car looks bad ass with the bowtie off.

What do you guys think?

[Blizzard]

Originally Posted by thePill

The wheels are the last thing we will worry about, I am looking for SSX wheels that will fit. The original concept had side exhaust but I removed it, anyone that has seen how side exhaust is set up never wants it.

I think long ago it was stated that it would not work for a factory car along with a functional mail slot.

[Blizzard]

Originally Posted by Jinx

Here are some revised Z/28 designs. I noticed more people liking the spy shot Z28 and the BB v.2 ram air hood. I personally dont like that version of the hood. So I made a revision to my original Z/28 concept that intergraded the "BB v.2" cues in a fashion that made me love it. Also I included a Z/28 only hood stripe on one.

Here is what was designed by Jinx a while ago. Also it may be able to make the the Leno fog light multi function as brake ducts.

Originally Posted by Keenov

[thePill]

Originally Posted by Blizzard

Not sure how functional that chin would be aero wise.

The one piece bumper cover/splitter fascia is intended to eliminate air from going under the car and dispense airflow to the sides or into the radiator. I would also like to see the Z28 GS.R come with an adjustable splitter that bolts on to the factory splitter (the Intimidator Camaro's splitter). The adjustable splitter does not come attached to the Z28, it is for off road use only and is to be mounted before competition (same with the rear adjustable spoiler). Race speeds for this car should be between 70 and 130mph as many other cars in its class speeds are.

Z28 GS.R additional factory race equipment (Adjustable front splitter & Adjustable rear spoiler). Race equipment can be used as replacements for the OEM splitter (if the splitter is not one piece with the fascia) and spoiler, Race equipment is for off road use ONLY:

[thePill]

Originally Posted by WYKOFF69Z

Car looks badass with the bowtie off.

What do you guys think?

Thanks man, we will get to the wheels after we sort the body out.