05-30-2010, 11:43 AM | #1 |
Drives: 2010 Camaro 1SS/RS Black on Black Join Date: May 2010
Location: Des Moines, Iowa
Posts: 27
|
BADA$$ SUBWOOFER INSTALL!!!!
Some of you may remember my noob thread, and my first car show trophy. I finally got my subwoofer done and installed. My setup is from Elemental Designs. This is the 13AV.2 Subwoofer and the nine.1 amp. If you've never heard of elemental designs go to youtube and type in 13av2 excursion test to see what this sub is capable of. Elemental built the box and faceplates. I cut out the punisher skulls and painted the box with textured paint(looks like carpet). Here are some photos!!
My Car All done painting and ready to install in the car! Another Angle, the hole drilled on the left side is for a toggle switch I installed for the remote wire. This way I didn't have to run a wire from the stereo or under the hood to the back of the car. Finally, all bolted up and in the car, sounds awesome. I put some deadening in the trunk and there isn't a rattle anywhere!! One more of my car, I stare at it constantly!! Hope you enjoy!!!! |
05-30-2010, 11:57 AM | #2 |
Drives: 2011 CGM 1LT RS (M6) Join Date: May 2010
Location: SW Ohio
Posts: 703
|
I do like the wheels in black and thats a cool system but now you have about as much trunk space as my 4th gen lol.
|
05-30-2010, 12:01 PM | #3 |
The Eponymous Jose
|
As a Home Theater enthusiast, Elemental Designs is very well regarded in the driver business and theater subwoofer business.
So I can only imagine that their car audio offerings are just as stellar. Nice custom work, though!
__________________
|
05-30-2010, 02:04 PM | #4 |
|
nice skullz!
__________________
Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery! |
05-30-2010, 02:05 PM | #5 |
|
cool
__________________
Jannetty Racing JRE Street Package
|
05-30-2010, 02:08 PM | #6 |
Drives: 2010 Camaro 1SS/RS Black on Black Join Date: May 2010
Location: Des Moines, Iowa
Posts: 27
|
I don't really care about trunk space. The backseats make good storage since you cant fit people back there
|
05-30-2010, 08:15 PM | #7 |
Account Suspended
|
looks ok, but the box looks small for the sub. Also is the area behind the skulls like a drug stash area lol jk
not my taste but good work on the skulls. |
05-30-2010, 10:47 PM | #8 |
Drives: IOM RS M6 Join Date: Apr 2010
Location: Lexington, KY
Posts: 266
|
Jeez that's sick. Nice job.
__________________
Ordered 4.20.10 | Delivered 6.8.10 (Recent Photos) Upcoming mods: MRT V2 Exhaust, Apex LED Tails, CAI. I specialize in Automotive Photography. Visit my site here. |
05-31-2010, 01:17 AM | #9 |
The wait is over!
Drives: 2010 Camaro, IOM, L99, Auto Join Date: Mar 2010
Location: Washington
Posts: 1,081
|
I am running some eD amps in my pickup right now, good stuff... so if they made subs like they make amps, that should freakin pound!
__________________
Ordered - 4/17/2010
Delivered - 5/29/2010 AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener |
05-31-2010, 11:09 AM | #10 | ||
Drives: 2010 1LT RS Rally Yellow Join Date: Oct 2009
Location: southern Illinois
Posts: 2,973
|
Quote:
Quote:
Good stuff maybe, but they have a history that includes poorly designed drivers, even worse customer service and an arrogant ass as an owner. To the OP, good luck with the equipment. Nice install, however, looks good in trunk!
__________________
PacMan
|
||
05-31-2010, 02:50 PM | #11 | |
The wait is over!
Drives: 2010 Camaro, IOM, L99, Auto Join Date: Mar 2010
Location: Washington
Posts: 1,081
|
Quote:
I heard/read a bunch of the same type of stuff (CS and Arrogant owner) before i picked up the amps... figured what the heck, the truck is kind-of a testing ground for gear so if it didnt work out I was going to replace them before too long anyway. the CS I got was pretty decent all in all, so nothing to complain about there...
__________________
Ordered - 4/17/2010
Delivered - 5/29/2010 AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener |
|
05-31-2010, 05:51 PM | #12 | |
Drives: 2010 1LT RS Rally Yellow Join Date: Oct 2009
Location: southern Illinois
Posts: 2,973
|
Quote:
That's awesome! I remember some of the history on the amps, and the fact they were rebadged something or others, lol. Not bad something or others either, but Ben had nothing to do with their design, which could be a good thing. I was left with a bad attitude towards them about 9 years ago, but won't get into it. I will say that if someone is happy with them, and has no complaints, then all is good!
__________________
PacMan
|
|
06-02-2010, 10:45 PM | #13 |
Drives: 2010 Camaro 1SS/RS Black on Black Join Date: May 2010
Location: Des Moines, Iowa
Posts: 27
|
No complaints here. In fact, I have been involved in several installs with Elemental Designs. At some point however, they will phase out car audio all together as their home theater has really taken off. They do order the amps in, but put together their own speakers and they do one off stuff for customers as well.
|
06-02-2010, 11:35 PM | #14 |
JEFF2010SSMANUAL
Drives: IOM 2SS/RS LS3 Join Date: Aug 2008
Location: Northern IL
Posts: 1,953
|
Nice job.
A small box is fine if its sealed. Also if you use extra insulation, as it makes the woofer/sub react as if the box is larger. The problem with sealed boxes is that they need double the watts as a properly tuned ported box for the same dB level. But sealed boxes are more accurate and sound better. TOO many cheap ported boxes/subs put out unreal bass. If I didn't mind taking up my trunk I would built a 4 cu. ft. ported/bass reflex enclosure, but I am going to design and build a small sealed box for 1 of my 12" Diamond subs tomorrow. Just bought the harness that plugs directly into the Boston amp and has phono outs and a amp turn-on lead wire. Awesome. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
INSTALL OF BARTON SHORT THROW SHIFTER | BLACK10 | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 141 | 03-20-2017 10:01 PM |
Roto-Fab Cold Air Intake Install - PHASTEK Performance | Sean@Phastek | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 30 | 03-17-2011 02:46 PM |
4.10 or 3.73 Gear & Install Kit Combo | Apex Paul | Transmission / Driveline | 21 | 08-21-2010 01:55 PM |
******** 2 subwoofer box install pics? | Dmundz | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 2 | 06-03-2010 11:52 PM |
DIY : Install catback on 2010 Camaro SS | Nine Ball | Camaro DIY & HOW-TO instructions & discussions | 3 | 08-09-2009 04:36 PM |