Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
JUICEDMOTORSPORTS
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 12-01-2018, 04:16 PM   #1
fastblack10ss
 
Drives: 2010 SS M6
Join Date: Aug 2017
Location: Medina TN
Posts: 11
DSX Flex with TVS2300 fuel line help

Trying to put on the DSX flex fuel kit and the fuel line that came with TVS2300 kinks if I try connecting sensor to fuel rail then TVS fuel line into it.
Any suggestions or pictures of what you did? Also now I canít get the tool in to release the fuel line from sensor...not enough gap for it to fit.
fastblack10ss is offline   Reply With Quote
Old 12-01-2018, 04:20 PM   #2
Batmanntexas

 
Batmanntexas's Avatar
 
Drives: 2012 Camaro SS (2SS)
Join Date: Aug 2012
Location: Sanford, NC
Posts: 1,020
Can you provide any pics of your issues?
__________________
745RWHP/634RWTQ on 93 @ 10psi
806/676 on E85 @ 10psi

COTW 9/8/14
Batmanntexas is offline   Reply With Quote
Old 12-01-2018, 07:23 PM   #3
fastblack10ss
 
Drives: 2010 SS M6
Join Date: Aug 2017
Location: Medina TN
Posts: 11
This is fuel line that I attached flex fuel. So the line kinks to the left side. I’ll try to get picture later of the setup with kink.
fastblack10ss is offline   Reply With Quote
Old 12-01-2018, 11:19 PM   #4
fastblack10ss
 
Drives: 2010 SS M6
Join Date: Aug 2017
Location: Medina TN
Posts: 11
I didnít put the sensor back on rail because it was a pain to get off but should be able to see where the line will link or the left side. Also see not enough space to get tool to remove sensor from fuel line.
Any suggestions?
Attached Images
  
fastblack10ss is offline   Reply With Quote
Old 12-02-2018, 08:35 AM   #5
DSX Tuning
 
Drives: 2018 Colorado ZR2/2019 Corvette ZR1
Join Date: May 2017
Location: St. Louis, MO
Posts: 311
Break off the pieces of the disconnect tool that actually need to get in there, and use a screwdriver or two to push them in and release the clips. That's how I unhook them.

The bummer is that the connection point is so damn close and their hose is so short that there aren't a lot of options. You may be better off with a custom hose.
DSX Tuning is offline   Reply With Quote
Old 12-02-2018, 08:50 AM   #6
fastblack10ss
 
Drives: 2010 SS M6
Join Date: Aug 2017
Location: Medina TN
Posts: 11
Do you recommend putting sensor on rail or line coming up to engine bay? Does the direction of flow matter?
Thinking either longer hose or one with a 90*...any suggestions best/easiest place to find hose already made or items to make custom hose?
fastblack10ss is offline   Reply With Quote
 
Reply

Tags
dsx, e85, flex, fuel, tvs2300

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:09 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.