07-16-2009, 04:56 PM | #1 | |
Black SS2 with Clear Bra Photos and Sandblast VIDEO!
Ok...trust me I looked all over the web for a Black Camaro (any black car as well) that had a clear bra installed. So, if you're thinking about saving your paint from stone chips, sand, tar, bird dung, bug guts, and getting a clear bra on your BLACK Camaro....I hope the link below and my pics help you to decide.
As you ponder whether you might want this for your sweet ride, ask yourself, "Am I ok with seeing the edge line of the clear bra or am I ok with seeing rock chips and sand pits?" I went with the Venture Shield(lifetime warranty) vs the 3M Bra(5yr warranty). $624 including tax in N. VA. I'm certain after seeing what happened to my last car's front end, that for me this was a good investment. Check out this video....it convinced me...
__________________
Vince
SS2 Black with CGM Stripes 3800 Born: 25 May VIN#12136 6000 Mine 26 June 2009 SLP Loudmouth II, NOWEEDS, BMR 1.4/1.0 Lowering Springs, Cold Air Inductions Intake, Tune, Eagle Eyes w HID, SLP "SS" Grille Insert, Pistol Grip Shifter, Hawk PC Pads, RGB Scanner, Tint, Headlight Armor, Clear Bra, 22's. |
||
07-16-2009, 05:14 PM | #2 |
IM A GURL
Drives: 2010/2SS Join Date: May 2009
Location: Killeen,TX
Posts: 640
|
great video i was thinkin of getting mines done i also have a black one
__________________
1100, Preliminary order accepted - 13oct08
2000, Order accepted by GM ----- n/a 3000, Order acc. by P.R---------- n/a 3100, Order available to sequence- n/a 3300, Order sch. for production--- 21may09 3400, Order broadcast------------ 28may09 3800, Order produced ------------ 2jun09(2G1FT1EW8A9114199) 4000, Available to ship 4200, Shipped--------------------9june09 ITS HERE 18JUNE09 |
07-16-2009, 05:16 PM | #3 |
Just do some research on whether you want 3M or Venture Shield....2 most popular. 3M bought out VS but the life time warranty for VS is still good. Installer experience is where you want to spend your research time. Best of luck....as an owner of a Black Camaro, Black Corvette, and Black SUV, I think I'm making a sound investment.
__________________
Vince
SS2 Black with CGM Stripes 3800 Born: 25 May VIN#12136 6000 Mine 26 June 2009 SLP Loudmouth II, NOWEEDS, BMR 1.4/1.0 Lowering Springs, Cold Air Inductions Intake, Tune, Eagle Eyes w HID, SLP "SS" Grille Insert, Pistol Grip Shifter, Hawk PC Pads, RGB Scanner, Tint, Headlight Armor, Clear Bra, 22's. |
|
07-16-2009, 08:51 PM | #4 |
Follow Up
To those PM me...yes, they did the mirrors, front fascia, hood, quarter panel section and door edges.
__________________
Vince
SS2 Black with CGM Stripes 3800 Born: 25 May VIN#12136 6000 Mine 26 June 2009 SLP Loudmouth II, NOWEEDS, BMR 1.4/1.0 Lowering Springs, Cold Air Inductions Intake, Tune, Eagle Eyes w HID, SLP "SS" Grille Insert, Pistol Grip Shifter, Hawk PC Pads, RGB Scanner, Tint, Headlight Armor, Clear Bra, 22's. |
|
07-16-2009, 08:56 PM | #5 |
Drives: an autobot Join Date: May 2009
Location: Somewhere only we know
Posts: 2,244
|
how much did that cost. it sounds like a good investment
|
07-16-2009, 09:02 PM | #6 | |
Cost
From the top of the Thread....
As you ponder whether you might want this for your sweet ride, ask yourself, "Am I ok with seeing the edge line of the clear bra or am I ok with seeing rock chips and sand pits?" I went with the Venture Shield(lifetime warranty) vs the 3M Bra(5yr warranty). $624 including tax in N. VA. I'm certain after seeing what happened to my last car's front end, that for me this was a good investment. Check out this video....it convinced me...
__________________
Vince
SS2 Black with CGM Stripes 3800 Born: 25 May VIN#12136 6000 Mine 26 June 2009 SLP Loudmouth II, NOWEEDS, BMR 1.4/1.0 Lowering Springs, Cold Air Inductions Intake, Tune, Eagle Eyes w HID, SLP "SS" Grille Insert, Pistol Grip Shifter, Hawk PC Pads, RGB Scanner, Tint, Headlight Armor, Clear Bra, 22's. |
||
07-16-2009, 10:50 PM | #7 | ||
Drives: an autobot Join Date: May 2009
Location: Somewhere only we know
Posts: 2,244
|
Quote:
|
||
07-17-2009, 04:26 AM | #8 |
|
I just couldn't handle that line. I know it protects from potential chips but thats all I would see evertime I looked at my car
|
07-18-2009, 04:07 PM | #9 |
Uh, yeah I would hate to see that fine line protecting my paint, I would much rather see a bunch of rock chips in my paint...
Hello!!! I had a clear bra on my last car, first clear bra I had ever gotten, and compared to other cars without it that are the same age, after that there was no question. One of the first mods I got, so now when I hear that ping or thud, I know if it hit where the protection film was there will be no worries!!! But seriously, please consider the long term, it would help the resell value, as well as keeping the car looking great if you don't want to sell it in the future, it will still look new!!! Or at least newer!!!
__________________
Ordered 10-13-08 2SS/RS M6 BLK/GRY
VIN #2386 Delivered 6-11-09 - Woo Hoo!!! Hey Houston locals-------- Join the H-Town Camaro Club www.H-TownCamaroClub.com |
|
07-18-2009, 04:42 PM | #10 |
Drives: 2010 1SS/RS Inferno Orange Join Date: Jun 2009
Location: East Ky
Posts: 704
|
Hmm pay like 3k and have them do the entire car for no visible lines! lol. Or maybe the entire hood/front fenders?
|
07-18-2009, 04:44 PM | #11 |
Camaro SL,UTs
Drives: 2010 Camaro SS/RS #16429 Join Date: Sep 2006
Location: South Jordan, UT
Posts: 7,358
|
That line just drives me nuts or I would do it....There's a guy at my work that has a black Acura TSX and he had it clear bra'd. You can tell the paint is fading faster were there is no clear bra. It looks horrible.
__________________
|
07-18-2009, 11:34 PM | #12 |
Venture Shield product doesn't block UV so it won't fade.
__________________
Vince
SS2 Black with CGM Stripes 3800 Born: 25 May VIN#12136 6000 Mine 26 June 2009 SLP Loudmouth II, NOWEEDS, BMR 1.4/1.0 Lowering Springs, Cold Air Inductions Intake, Tune, Eagle Eyes w HID, SLP "SS" Grille Insert, Pistol Grip Shifter, Hawk PC Pads, RGB Scanner, Tint, Headlight Armor, Clear Bra, 22's. |
|
07-18-2009, 11:47 PM | #13 |
You can also get the entire hood done for an additional $400. You really don't notice the line...the pics I took, the flash makes the line more visible than the naked eye. Just watch the video above....if you have a pitted windshield from sand smacking your glass, imagine what your paint looks and feels like over time.
__________________
Vince
SS2 Black with CGM Stripes 3800 Born: 25 May VIN#12136 6000 Mine 26 June 2009 SLP Loudmouth II, NOWEEDS, BMR 1.4/1.0 Lowering Springs, Cold Air Inductions Intake, Tune, Eagle Eyes w HID, SLP "SS" Grille Insert, Pistol Grip Shifter, Hawk PC Pads, RGB Scanner, Tint, Headlight Armor, Clear Bra, 22's. |
|
07-18-2009, 11:48 PM | #14 |
Drives: 2010 Camaro SS/RS Join Date: Sep 2008
Location: Denham Springs, LA
Posts: 705
|
I think you mean it will allow the paint under it to fade like the rest of the car?
also, why not go ahead and do the entire hood and front fenders then there would be no line.. also what about a strip above the windshield and behind the tires especially the rear tires to protect from debirs there too?
__________________
2014 C7 Z51~ M7 custom paint, Mods soon to come, researching at the moment. |
|
|
Thread Tools | |
|
|