03-12-2017, 07:24 PM | #1 |
@moorethrottle
Drives: 2010 Camaro SS F1X 427 LSNext Join Date: Sep 2011
Location: Brighton, MI
Posts: 258
|
Driveline items for Sale LOTS of things
All items are SOLD
Last edited by CamaroGirl5; 07-10-2017 at 08:47 AM. Reason: pricing |
03-12-2017, 10:03 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
How much for Tick Bleeder and Ideal Garage master cylinder?
Slave cylinder goes inside the bell housing correct!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
03-12-2017, 11:11 PM | #3 |
Drives: white 2010 ss and 2011 6.2 silvy Join Date: Jan 2011
Location: dfw
Posts: 316
|
How much for the McLeod rxt and flywheel? And the driveshaft too.
__________________
2010 RS2SS, XS POWER HEADERS AND FULL EXHAUST, ROTOFAB COLD AIR AND ENGINE COVERS, MSD PLUG WIRES. PFADT DROP SPRINGS, SPORT SWAY BARS, TRAILING ARMS, TOE LINKS. HURST SHIFTER, BILLET PEDALS.
BLACKOUT TAIL PANEL, TINTED TAIL LIGHTS, MAIL SLOT BLACKOUT, WHITE BOWTIES |
03-12-2017, 11:41 PM | #4 |
@moorethrottle
Drives: 2010 Camaro SS F1X 427 LSNext Join Date: Sep 2011
Location: Brighton, MI
Posts: 258
|
Yes on the slave, but something about the size for the proper clutch, thing, idk thats what they told me. haha
|
03-13-2017, 09:06 AM | #5 |
How much for the trans?
Sent from my iPhone using Tapatalk |
|
03-13-2017, 03:12 PM | #6 |
Drives: 2010 IOM 2ss/RS Join Date: Sep 2009
Location: SoCal, I.E.
Posts: 1,545
|
I cleaned out the inbox if you'll try again please
__________________
Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter
|
03-14-2017, 07:36 AM | #7 |
army life
Drives: 2018 hyper blue zl1 Join Date: Feb 2011
Location: clarksville, tn
Posts: 868
|
Would you ship might be interested in Dss driveshaft and reservoir how much shipped to 37042
__________________
Mods: lingenfelter 15% overdrive pulley, ATI balancer, kooks headers, DSX low side aux pump, DSX flex fuel, GPI stage 2 cam, trans tune, cat delete, rear seat delete, rotofab cai
|
03-15-2017, 10:07 AM | #8 |
@moorethrottle
Drives: 2010 Camaro SS F1X 427 LSNext Join Date: Sep 2011
Location: Brighton, MI
Posts: 258
|
I am going to be keeping the Hammerhead kit together, that means the hammerhead, axles, and driveshafts, need to all go together due to sizing.
|
03-15-2017, 02:23 PM | #9 |
03-15-2017, 04:34 PM | #10 |
@moorethrottle
Drives: 2010 Camaro SS F1X 427 LSNext Join Date: Sep 2011
Location: Brighton, MI
Posts: 258
|
PM me for that please
|
03-15-2017, 05:57 PM | #11 |
03-16-2017, 12:42 PM | #12 |
Drives: 2011 1SS RS Synergy Join Date: Aug 2010
Location: Michigan
Posts: 458
|
Which bleeder is this for $75? The only one I find on their site is $50 new. Also which fluid reservoir? Is it the JDP kit?
|
03-16-2017, 04:01 PM | #13 |
@moorethrottle
Drives: 2010 Camaro SS F1X 427 LSNext Join Date: Sep 2011
Location: Brighton, MI
Posts: 258
|
Its the $129 one from Tick, and yes its the JDP kit for the reservoir.
|
03-16-2017, 04:29 PM | #14 |
Drives: 2011 1SS RS Synergy Join Date: Aug 2010
Location: Michigan
Posts: 458
|
|
|
|
Tags |
dss, hammerhead, mcleod, tick, tr6060 |
|
|