Ground Cable for sale thread. - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1JEWLDSSRS · 09-25-2023, 02:59 PM

Quote:

Originally Posted by Chester

Watched that video before, starting doesn't sound any different after installing the trunk ground cable then before. Still had the same stumble/ delay

So did I until I installed the bell housing one along with the trunk one.. That made a big difference, that's why they show two vids, in case the trunk one didn't do it.Then I found my starter was taking a dump and replaced it, and now it starts waayyy better than it ever did brand new when I bought her!!

Chester · 09-25-2023, 04:10 PM

Quote:

Originally Posted by 1JEWLDSSRS

So did I until I installed the bell housing one along with the trunk one.. That made a big difference, that's why they show two vids, in case the trunk one didn't do it.Then I found my starter was taking a dump and replaced it, and now it starts waayyy better than it ever did brand new when I bought her!!

The video I saw was installing the trunk ground after already had did the bellhousing to frame, startup sounded the same before and after.

Bee · 09-25-2023, 04:47 PM

I was having hot start issues with mine over the years and never realized it was stemming from the battery ground cable. Basically, when I would have to immediately restart the car (think staging lanes, entering a car show, or realizing you could have parked a little better in a spot), it was very slow cranking. I got to the point where I was keeping a jump box in the car and was considering replacing the battery...even though I always keep it on a tender. I threw a set of ground cables I bought from bald_eagle, and now my car fires up without hesitation each time.

RupertPupkin · 09-25-2023, 07:40 PM

Here's a better video. Of the before and after. Granted, this is more from the block to the frame. I bought a 3rd cable from Amazon, for the battery to trunk ground. The cables I got from Baldy will be trans to frame, and block to frame.

https://youtu.be/CJMLKbUW92Q?si=grW0Qe7AOmkJ2Ip6

1JEWLDSSRS · 09-26-2023, 11:13 AM

Quote:

Originally Posted by Bee

I was having hot start issues with mine over the years and never realized it was stemming from the battery ground cable. Basically, when I would have to immediately restart the car (think staging lanes, entering a car show, or realizing you could have parked a little better in a spot), it was very slow cranking. I got to the point where I was keeping a jump box in the car and was considering replacing the battery...even though I always keep it on a tender. I threw a set of ground cables I bought from bald_eagle, and now my car fires up without hesitation each time.

RupertPupkin · 09-30-2023, 02:06 PM

Finally got the wires installed. Damn bolt in the engine bay subframe is a BITCH. Idk why but it seemed like I had more wiring in that area compared to some of the videos/pics I've seen. Pain in the ass moving shit, and my big hands don't help.

I did notice it fired up a little faster. How much faster, idk. I mainly did it to help fix my EPS going haywire. Hopefully this fixes it.

Does anyone know the bolt size/thread for the chassis located by the trans bellhousing?
Would I even need it? I already have the engine to chassis ground, and battery to body ground in trunk.

spyderbuddy · 09-30-2023, 02:55 PM

Quote:

Originally Posted by The_bald_eagle_machine

I honestly can't speak on the v6...

Yes especially if you have headers, Heat soaked starter problems
I do see a problem with the one in the trunk, V6 Cars have spare tires so the spare would rub the wire, you got a fix for that?

1JEWLDSSRS · 10-01-2023, 11:31 AM

Quote:

Originally Posted by RupertPupkin

Finally got the wires installed. Damn bolt in the engine bay subframe is a BITCH. Idk why but it seemed like I had more wiring in that area compared to some of the videos/pics I've seen. Pain in the ass moving shit, and my big hands don't help.

I did notice it fired up a little faster. How much faster, idk. I mainly did it to help fix my EPS going haywire. Hopefully this fixes it.

Does anyone know the bolt size/thread for the chassis located by the trans bellhousing?
Would I even need it? I already have the engine to chassis ground, and battery to body ground in trunk.

The bolt we used on my car at that point already had a nut on it, we just sanded the paint off the frame portion under it and bolted the cable right up.

dermzcont · 12-05-2023, 04:54 AM

I found my starter was taking a dump and replaced it, and now it starts waayyy better than it ever did brand new when I bought her!! krnl download
hdstreamz.uno

1JEWLDSSRS · 12-05-2023, 10:33 AM

One of my "old" posts copied by someone to spam!! Reported..^^^^

09-25-2023, 04:47 PM	#31
Bee Drives: SS/RS - Rally Yellow Join Date: May 2009 Location: Levittown, PA Posts: 593 View My Garage	I was having hot start issues with mine over the years and never realized it was stemming from the battery ground cable. Basically, when I would have to immediately restart the car (think staging lanes, entering a car show, or realizing you could have parked a little better in a spot), it was very slow cranking. I got to the point where I was keeping a jump box in the car and was considering replacing the battery...even though I always keep it on a tender. I threw a set of ground cables I bought from bald_eagle, and now my car fires up without hesitation each time. __________________ Check out my build here. SEPA5 South Eastern Pennsylvania 5th Gen Camaro Club

09-25-2023, 07:40 PM	#32
RupertPupkin Drives: 2014 Camaro SS 1Le Join Date: Feb 2016 Location: IL Posts: 1,607	Here's a better video. Of the before and after. Granted, this is more from the block to the frame. I bought a 3rd cable from Amazon, for the battery to trunk ground. The cables I got from Baldy will be trans to frame, and block to frame. https://youtu.be/CJMLKbUW92Q?si=grW0Qe7AOmkJ2Ip6 __________________ 2014 SS 1LE Money Pit/ Forged 402 CAM 22X/24X, .619/.617, 113 LSA/ LS9 Heads FIC 1200cc/DSX Aux Pump//McLeod RXT Clutch 730whp: 630Trq Last edited by RupertPupkin; 09-30-2023 at 02:01 PM.

09-30-2023, 02:06 PM	#34
RupertPupkin Drives: 2014 Camaro SS 1Le Join Date: Feb 2016 Location: IL Posts: 1,607	Finally got the wires installed. Damn bolt in the engine bay subframe is a BITCH. Idk why but it seemed like I had more wiring in that area compared to some of the videos/pics I've seen. Pain in the ass moving shit, and my big hands don't help. I did notice it fired up a little faster. How much faster, idk. I mainly did it to help fix my EPS going haywire. Hopefully this fixes it. Does anyone know the bolt size/thread for the chassis located by the trans bellhousing? Would I even need it? I already have the engine to chassis ground, and battery to body ground in trunk. __________________ 2014 SS 1LE Money Pit/ Forged 402 CAM 22X/24X, .619/.617, 113 LSA/ LS9 Heads FIC 1200cc/DSX Aux Pump//McLeod RXT Clutch 730whp: 630Trq Last edited by RupertPupkin; 09-30-2023 at 02:51 PM.

12-05-2023, 10:33 AM	#38
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,471	One of my "old" posts copied by someone to spam!! Reported..^^^^ __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

12-05-2023, 04:54 AM	#37
dermzcont Drives: G U Join Date: Sep 2023 Location: texas Posts: 1	I found my starter was taking a dump and replaced it, and now it starts waayyy better than it ever did brand new when I bought her!! krnl download hdstreamz.uno