10-02-2019, 06:44 AM | #43 |
|
I have a list of mods that were possibilities for the future when money is available again. A meth kit most likely from Alky was one of the mods along with a 10% lower. Those mods along with the tune would push over $2k. I really need tires before I do that.
|
10-02-2019, 09:12 AM | #44 |
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 949
|
I’m at the same power level as you, and my factory tires suck now. I’m going with the Alky kit with the prometh Lsa kit. My tuner mike, formally of New era performance tunes my car for $100. But he’s also my neighbor.
|
10-02-2019, 09:22 PM | #45 | |
|
Quote:
What's the Alky kit cost? What do you think it will do performance wise? |
|
10-03-2019, 05:09 AM | #46 | |
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 949
|
Quote:
The alky kit cost $679 you can use your windshield washer bottle for a tank or use a prometh tank 2 gallon $179 and the lsa prometh kit $399. You can find cheaper kits, but do some research on them lots of problems. performance wise, I hear about 50 hp. its more about the cooling and octane with the meth to add back the timing your losing from heat soak. |
|
10-03-2019, 10:27 AM | #47 |
Drives: 2014 ZL1 Join Date: Apr 2018
Location: KCMO
Posts: 180
|
|
10-03-2019, 09:58 PM | #48 |
|
|
11-08-2019, 04:53 AM | #49 |
Drives: corvette z06 Join Date: Feb 2018
Location: toronto
Posts: 97
|
May i ask how much all these mods costed you ?
Im may get a ZL1 , looking at it this sunday , but ill probably leave it stock considiering how expensive it is to get a few extra HP out of these things You would think a pulley and a tune could do it but nope |
11-08-2019, 06:33 AM | #50 |
|
What are you wanting to do? I have almost 30 mods to my car so I cant give you an accurate number of what youre asking for unless you tell me what mods youre going to do. Shoot me a list and I'll let you know.
|
01-21-2020, 12:11 AM | #51 |
|
|
01-21-2020, 05:32 AM | #52 |
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 949
|
yes I still have it. just pm'd you
__________________
22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 850/ dsx aux kit/ 103mm throttle body/ RPM 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.
|
|
|
|
|