03-17-2013, 06:24 PM | #1 | |
Drives: 2013 zl1 Join Date: Nov 2012
Location: st louis
Posts: 838
|
Project Gt500 slayer is almost done
The final stage of the project is almost finished.. car started this afternoon and all thats left is the meth install and then off to tune and dyno, then off to Bradenton for the real stuff..
here is a quick vid.. just a start file and start up to make sure everything was sealed up.. car bounces to 14 pounds by like 4000 rpm..lol it is going to be interesting for sure to see how much boost it makes. The blower speed is going to be about 25,000 rpm..i cant find the chart but I remember calculating it to about that. im thinking it will be about 18 pounds. Even with the extreme porting im pretty sure the blower is maxxxxxed out..any more speed and even if i can keep the inlet temps down and octane high enough the rotor speed will soon start getting into a very dangerous redline.. i know they explode about 26,000 rpm..lol mods list I.D 850 injectors LPE cold air LPE 2.38 upper pulley N/w 102 tb LPE 9.11 lower pulley TSP 2" headers C.B.I custom grind (nickname E.S.A.D) Ported blower and snout (baron racing lol) head studs ls9 gaskets C.B.I custom meth kit (single nozzle for now) 3600 rpm stall ( i am hoping its not to loose) 20" weld RT's front and back... DSX tuneing goal... anything in the 10s on a 20" tire and any mph over 130.. Im pretty sure im there..
__________________
2011 cts-v coupe (pinky) wifes car.. ls9 cam c.a.i. 11.44 2007 corvette vert ..retired.. 2013 zl1 stock blower stock ci 20" wheels 10.36 135...so far.. Last edited by The Baron; 03-19-2013 at 07:11 PM. |
|
03-17-2013, 07:12 PM | #2 |
ANGRY Z
Drives: 2015 Camaro ZL1 Join Date: May 2012
Location: Alberta, Canada
Posts: 1,406
|
Here's the chart. Nothing like running it right on the edge!!
|
03-17-2013, 07:22 PM | #3 |
Drives: 2013 ZL1 Join Date: Oct 2012
Location: Dubai
Posts: 757
|
awesome! Now im wondering are those wheels streetable? and how much weight did they save over the ZL1 wheels
__________________
1150bhp Whipple 4.0 Supercharged 427ci Camaro ZL1 |
03-17-2013, 07:59 PM | #4 |
Drives: 2013 zl1 Join Date: Nov 2012
Location: st louis
Posts: 838
|
they are welds street wheels.. that dont mena they wont bend but hey..lol
they are a few pounds lighter than the stock wheel.. i got the widest fronts though because i wanted a street setup and not to completly ruin the car..
__________________
2011 cts-v coupe (pinky) wifes car.. ls9 cam c.a.i. 11.44 2007 corvette vert ..retired.. 2013 zl1 stock blower stock ci 20" wheels 10.36 135...so far.. |
03-17-2013, 08:11 PM | #5 |
Drives: 2012 ZL1 Join Date: Aug 2012
Location: Jacksonville, Fl
Posts: 42
|
You coming to Bradenton, Fl?
|
03-17-2013, 09:00 PM | #6 |
Drives: 2013 zl1 Join Date: Nov 2012
Location: st louis
Posts: 838
|
as long as everything works this week in the tuning stage, Ill be in the RPM transmission pit.
__________________
2011 cts-v coupe (pinky) wifes car.. ls9 cam c.a.i. 11.44 2007 corvette vert ..retired.. 2013 zl1 stock blower stock ci 20" wheels 10.36 135...so far.. |
03-18-2013, 08:44 AM | #7 |
Drives: 2012 Camaro ZL1, 2013 Porsche 911 Join Date: Feb 2013
Location: Florida
Posts: 27
|
That thing sounds NASTY!
__________________
6 Speed Manual with nothing else needed
|
03-18-2013, 04:10 PM | #8 |
Drives: 2013 ZL1 Join Date: Jan 2013
Location: So Cal
Posts: 19
|
|
03-18-2013, 04:51 PM | #9 |
Drives: 2013 zl1 Join Date: Nov 2012
Location: st louis
Posts: 838
|
Its got a nick Williams 102 on it.. I guess I forgot to add that to the list.. fixed
__________________
2011 cts-v coupe (pinky) wifes car.. ls9 cam c.a.i. 11.44 2007 corvette vert ..retired.. 2013 zl1 stock blower stock ci 20" wheels 10.36 135...so far.. |
03-18-2013, 05:32 PM | #10 |
Drives: 2013 ZL1 Join Date: Jan 2013
Location: So Cal
Posts: 19
|
|
03-18-2013, 07:04 PM | #11 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
I remember a previous post about ID850s
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
03-18-2013, 09:25 PM | #12 |
Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010
Location: Alberta
Posts: 1,408
|
subscribed.
|
03-19-2013, 06:27 AM | #13 |
Drives: 99z28 with bolt-ons and a mwc fab 9 Join Date: Jul 2012
Location: Florida
Posts: 1,277
|
Gt500 "slayer"? That's a bold statement friend and I wish u the best of luck but a light bolt on gt500 will give u a hard time even with those mods.
__________________
I like my woman like my milk shakes, THICK!!!!
|
03-19-2013, 06:38 AM | #14 |
Drives: 2013 red Lingenfelter ZL1 Join Date: Apr 2012
Location: zionsville IN
Posts: 567
|
What a beast! Looking forward to dyno no's and 1/4 mi times!
|
|
|
Thread Tools | |
|
|