08-12-2020, 08:06 PM | #15 |
Drives: 2010 Camaro 2SSRS M6 Join Date: Jan 2019
Location: Alabama
Posts: 1,249
|
Most spray ammonia on the window and cover with a heavy duty trash bag and let it sit for a while. Or they use a steamer to get the glue off if in a hurry.
__________________
ECS supercharger, custom ground cam, ported throttle body, long tube headers, aeromotive fuel pump, fic injectors, ATI super damper, Corsa Extreme exhaust, elite engineering catch can and many other things.
|
08-12-2020, 08:45 PM | #16 |
Drives: 2010 Camaro 2SS Join Date: Jul 2020
Location: Overland Park, Kansas
Posts: 91
|
|
08-13-2020, 06:27 AM | #17 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
I used Goo-Gone when I took all my stripes off my camaro. I just soaked it good and let it set for a while to activate. Took all my emblems off and used it to.
__________________
|
08-13-2020, 06:35 AM | #18 |
Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,477
|
__________________
|
08-13-2020, 06:52 AM | #19 | |
Drives: 2010 Camaro 2SS Join Date: Jul 2020
Location: Overland Park, Kansas
Posts: 91
|
Quote:
|
|
08-13-2020, 06:53 AM | #20 |
Drives: 2010 Camaro 2SS Join Date: Jul 2020
Location: Overland Park, Kansas
Posts: 91
|
|
08-13-2020, 06:59 AM | #21 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
Have you watched the any of the youtube videos on how to use the 3M wheel yet?
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
08-13-2020, 07:32 AM | #22 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,442
|
When I took all the emblems and chrome trim I have on my Camaro for several years, I used goo gone too, just let it sit for quite a while to soften up the adhesive, and the stuff I couldn't get off, my detail shop had this eraser wheel and man it took EVERYTHING off and no harm at all to the paint.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
08-13-2020, 07:43 AM | #23 |
Drives: 2010 Camaro 2SS Join Date: Jul 2020
Location: Overland Park, Kansas
Posts: 91
|
|
08-13-2020, 07:44 AM | #24 | |
Drives: 2010 Camaro 2SS Join Date: Jul 2020
Location: Overland Park, Kansas
Posts: 91
|
Quote:
|
|
08-13-2020, 12:24 PM | #25 |
Fast Cars and Old Guitars
Drives: 2015 2SS RS (L99, baby!) Join Date: Apr 2012
Location: N. CA
Posts: 3,974
|
Turtle Wax makes a goo gone product. I used it on a GMC taking side moulding off. As I recall now, you had to let it sit quite a while. But it works pretty well. Didn’t seem to harm the paint but I wasn’t too worried about that on my old beater.
__________________
“I don’t want to belong to any club that would have me as a member.” - Groucho Marx
|
08-13-2020, 03:57 PM | #26 |
|
Had the same issue removing the 10 year old 3M clear bra from my son's 2007 Solstice GXP. You will 3M general purpose adhesive cleaner and a roll of Viva Signature cloth paper towels. Must be done in the shade and better if 80 degrees or less in temp. Lay a towel on an area where the glue residue ends and clean paint is. Soak the paper towel and keep wet with the 3M fluid. Give it time, patience is key. Eventually the glue will soften and turn into "slimy boogers" as it begins to come off the paint. You may need 2 containers of the 3M fluid. Patience and the glue residue will loosen. Keep the paper towel moist, not soaking wet but don't let it dry out either. The Viva paper towels are like cloth, hold the fluid well and won't scratch the paint as the glue loosens up and you wipe it off. Starting at an edge of the glue helps the process along. Be prepared for a several hour ordeal.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|
08-13-2020, 04:09 PM | #27 | |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
BLU DUCE AKA=Spike III Build
Quote:
[Just have patience when you hurry that is when you screw up and don't let people interupt you.]
__________________
|
|
08-13-2020, 04:45 PM | #28 |
Drives: 2010 Camaro 2SS Join Date: Jul 2020
Location: Overland Park, Kansas
Posts: 91
|
The 3M eraser wheel is not suppose to be used on plastic. Does anyone know if my 2010 Camaro SS OEM hood is a type of plastic?
|
|
|
|
|