Due to a technical issue, all posts made over the past 24-48 hours have been lost. We sincerely apologize for this!!!
 
Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection


Reply
 
Thread Tools
Old 11-08-2018, 11:56 AM   #1
blewbyyou
 
blewbyyou's Avatar
 
Drives: Dusk SE
Join Date: Jun 2014
Location: Apopka Fl.
Posts: 389
STARTING OVER

I have the week of Thanksgiving off and plan to give my baby some love.
I want to start over with the waxing process. Do I need to wash the car with some dish soap like Dawn to remove any old wax or polish? before applying new. then Clay bar then paint correction with a buffer before applying any type of wax. What would your process be if starting over.
THANKS
__________________
Daily Drives Dusk SE 2SS/RS
blewbyyou is offline   Reply With Quote
Old 11-08-2018, 12:48 PM   #2
Overflow
Space Shuttle Aficionado
 
Overflow's Avatar
 
Drives: 2010 CGM 2SS/RS
Join Date: Jun 2010
Location: North Dakota
Posts: 30,532
I wouldn't put dawn dish soap on any of my cars. Yes, it is a degreaser, but it's too harsh for a clear coat. I would look into getting a strip wash soap. Stuff that's actually meant for paint on a car.

I "start over" once a month. My process is:

1. Strip Wash (I use Adam's products)
2. Clay Bar
3. Wash with regular soap
4. Wax
5. Sealant

It may seem redundant, but it'll pay off when your car is 15 years old and still has pristine paint.
__________________
2010 Chevrolet Camaro CGM 2SS/RS
Overflow is offline   Reply With Quote
Old 11-08-2018, 01:40 PM   #3
fif_gen_powa

 
fif_gen_powa's Avatar
 
Drives: 2013 SS Blue Ray Metallic
Join Date: Apr 2014
Location: Ft. Lauderdale, FL
Posts: 1,401
Quote:
Originally Posted by Overflow View Post
I wouldn't put dawn dish soap on any of my cars. Yes, it is a degreaser, but it's too harsh for a clear coat. I would look into getting a strip wash soap. Stuff that's actually meant for paint on a car.

I "start over" once a month. My process is:

1. Strip Wash (I use Adam's products)
2. Clay Bar
3. Wash with regular soap
4. Wax
5. Sealant

It may seem redundant, but it'll pay off when your car is 15 years old and still has pristine paint.
Wax should go after sealant imo
__________________
Huronspeed turbo kit, Precision pt8847 T4 Turbo, Squash E85 fuel system, Aem Meth injection
Stock LS3 motor with BTR Stage 1 Turbo Cam, Dsmlights Tuned - 905whp

https://instagram.com/turbo_ls3/
fif_gen_powa is offline   Reply With Quote
Old 11-08-2018, 02:28 PM   #4
Overflow
Space Shuttle Aficionado
 
Overflow's Avatar
 
Drives: 2010 CGM 2SS/RS
Join Date: Jun 2010
Location: North Dakota
Posts: 30,532
Quote:
Originally Posted by fif_gen_powa View Post
Wax should go after sealant imo
It could go either way. Wax is a protectant and sealant is an enhancer.
__________________
2010 Chevrolet Camaro CGM 2SS/RS
Overflow is offline   Reply With Quote
Old 11-08-2018, 03:37 PM   #5
Joe M 2012 2SS

 
Joe M 2012 2SS's Avatar
 
Drives: 2012 2SS
Join Date: Nov 2014
Location: Shelby NC
Posts: 2,113
Since you live in Florida, I'd advise against using wax for a daily driven car. Car wax will begin to evaporate around 120* F. While the air temperature may not be that hot outside, a car with a dark colored base coat like yours left in direct sunlight will easily reach this temperature in the Florida sun.

That being said, many products labeled as "wax" aren't really wax, they are sealants. Wax is made of natural ingredients, sealants are made of polymers or other synthetics, most recently Silica, not to be confused with silicone. Sealants don't evaporate until the surface temp they are in contact with exceeds 300* F.

The most durable form of protection made today are coatings. These apply about 100X thicker than a wax does, have evaporation points in excess of 700* F and last 2 years or longer.

So if you choose to add wax, be advised on a daily driven car it wont last very long. 1-2 months.

If the only thing you have is wax on the car, Dawn will strip it off with no problems. Just be sure the car is cool to the touch and out of direct sunlight. Do not allow the Dawn to dry on the surface before rinsing.

Then clay the car. Using a clay alternative like the SM Arnold Speedy Prep Towel will cut your time to do this step by 50% or more. Use fine grade.

After claying...... wipe the car down with Isopropyl Alcohol diluted to 15-20%. You can get a bottle of 91% IPA and dilute it with distilled water. Both of these can be found at Wal-Mart for less than $5 for both. The IPA will remove any left over wax that the Dawn didn't get off, and any residue from claying.

Now polish the car. Since the introduction of Carpro Essence, I don't use standard finishing polish anymore. Essence will produce the same or better results in about 1/2 the time. It also leaves a layer of Silica protection that lasts for 1 year.

After polishing, wipe the car down again with the IPA solution to remove any oils or residues from the paint, this step is key to get a proper bond from whatever type of protection you put on the paint. With Essence you can skip this step.

Apply your protection. When applying, put a thin as possible coat on. While it may seem that thicker is better, if you have a lot of residue to buff off, your just wasting product, it's going into your towel instead of on the paint.

It's a good idea if you have never done it, after claying the car, to do an iron decontamination as well. Claying wont remove iron deposits.
__________________


Roto-Fab intake, SW 1 7/8" LT w/hi flow cats, Flowmaster outlaw exhaust, UDP, 160* stat, Circle D 3200, Moroso catch can, TCI line lock, Zex Nitrous 125 shot, Tuned via SCTX4 by Dynosteve at RDP.
Joe M 2012 2SS is offline   Reply With Quote
Old 11-08-2018, 10:05 PM   #6
Bandit63
 
Bandit63's Avatar
 
Drives: 2011 Camaro SS
Join Date: Feb 2017
Location: Paducah Ky
Posts: 198
1- wash and strip
2- clay bar
3- polish
4- sealant
5- wax
I use chemical guys, I think they have high quality products. A orbital polisher and some quality pads will make life a lot easier
__________________


MRR M228 wheels, Circle D 3200 stall, 3.91 gear, Texas Speed vvt 3.2 cam, CHE rocker arm bushings, Texas Speed headers, no cats
Bandit63 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:40 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.