02-04-2022, 10:14 PM | #15 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 808
|
I've heard the window for injection is between exhaust valve closing and intake valve opening, is this correct? Same source says 5* before e.v.c. to account for computer latency is close to ideal. So you'd be looking at aeound 352.8. Just my guess
|
02-05-2022, 07:02 AM | #16 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,811
|
Window of injection is between EVC/IVO (depending on overlap of cam) and IVC. That said, your start of injection can typically start 5* before IVO for the reason you described. Spring isn’t far away so I’m looking forward to documenting the SOI impact on power with some dyno time in the near future.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
02-05-2022, 06:36 PM | #17 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 808
|
Sweet! Like to see new data added to the mix
Guess I had gotten it mixed up because I didn't think it made sense to stop at IVO but thought that is what it said. Thanks for the info |
02-05-2022, 08:05 PM | #18 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,811
|
Yeah, it needs from approx 5 degrees before IVO to 5 degrees before ignition. That’s your window and why we keep IPW under ~6 ms or so.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
02-08-2022, 09:55 AM | #19 | |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,814
|
Quote:
SOI main purpose is to get the fuel injected on time for complete combustion. I do believe there are some gains in power to be had but it's not huge. Interested in your results this coming Spring.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
|
07-12-2022, 08:47 PM | #20 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,811
|
Just to circle back to this, when I hit the dyno the other day we baselined the car using 330 SOI at WOT. We then changed SOI to 350 and blended in the change and picked up *28 WHP*. We then tried 370 SOI and the run was identical to the 350 SOI run. So that was good data. We then put it back to 330 again and sure enough, lost 27 WHP. So that 350-360 range most tuners use worked well in my case.
IPW didn’t change (in the 5.0 range at E42 for those runs), but the exhaust richened up when advancing the SOI to 350/370. So, I’m not sure what to think about that yet. No change in knock readings regardless of SOI. Hope that is good data for my fellow Camaro6 pals.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
07-13-2022, 09:13 AM | #21 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,814
|
I believe what you found is optimal injection time for max power @ 350. Further advancing the SOI to 370 is richening up the AFR due to the longer injection window? In theory that should allow you to pull some fuel and reduce fuel system demand.
Great info!!
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
07-13-2022, 09:31 AM | #22 | |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,811
|
Quote:
So what’s clogging my brain is: is 370 actually richening it up? If the amount of fuel is the same that got sprayed in, and the IPW didn’t change, why is it richer? I feel like I’m missing something. If IPW was different then maybe that would be a clue. Maybe 350/370 just gave it more time to burn in the chamber?
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
|
07-13-2022, 03:34 PM | #23 | |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Quote:
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
|
07-13-2022, 05:11 PM | #24 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,811
|
Running the SOI up too high actually increases the risk of sending fuel out the exhaust since at 370 SOI you’re damn close to the EVC event, if I’m correct in my understanding. I really can’t explain it, since longer SOI has nothing to do with the actual combustion event, it’s just time to spray the fuel. So if I’m spraying the exact same amount of fuel… what the hell lol? Maybe Ted or Mike (TooHighPsi) can explain it?
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
07-14-2022, 01:00 PM | #25 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,814
|
I thought increasing SOI starts the injection time earlier not later? Aftermarket cams typically allow to start injecting fuel earlier due to the increased valve events?
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
07-14-2022, 05:01 PM | #26 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,811
|
It does, which pushes your injection start time into the Exhaust Valve Closing event if you get carried away. Let me see if I can find the great diagram I saw on HP Tuners Forum… I thought that did a great job explaining it…but I still don’t fully grasp it.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
07-15-2022, 04:59 PM | #27 |
Drives: 2015 C7 Z06 M7 Join Date: Dec 2012
Location: So-Cal
Posts: 654
|
Josh, your thoughts of earler are in the right direction. When it comes to DI with SC we want as much window as possible to inject fuel (as this is normally our limitation to power) and we want as much time for that fuel to try and reach a homogenous condition with the air before it burns.
Remember - SOI is not when the injector opens - it's when we "ask" it to open. Hence, it should get earlier with higher RPM, not because it's actually happening earlier, but due to mechanical limits of the injectors that we need to account for. All of my testing was done with a stock LT1 camshaft back in 2015, but since PD camshafts have similar overlaps, I wouldn't expect any differences. We ran dyno pulls increasing SOI at 5 degree incements on the engine dyno (not chassis) from stock settings until power flatlined, which happened with SOI at about 360-365 at 6500 rpm. (lower at less RPM of course) Also note that changing SOI does not change your fuel flow, only a change to PW can make that happen. While there are settings for EOI they aren't a hard limit, stretching your PW to longer than your allowed injection window will inject fuel outside this window. Below are my "safe" settings for PW while staying withing the window (also based off rpm) Engine RPM MAX PW (ms) 2000 20.0 2500 16.0 3000 13.3 3500 11.4 4000 10.0 4500 8.9 5000 8.0 5500 7.3 6000 6.7 6500 6.2 7000 5.7 7500 5.3 8000 5.0 8500 4.7 9000 4.4 Preferably I like to stay within those ranges - but on DI only I'll admit to pushing a bit past this in the quest for power. So, in short - if you're pushing the limits, I've always found increase in power when SOI is early and correct for that RPM, which in part lies the solution and the problem (finding that exact number). Since we now run port and full E85 on our cars, importance of these DI SOI settings drops a bunch and I leave most of the DI fuel settings as stock. We keep enough PW on the DI to maintain all the knock benefits that it offers, then provide a nice homogenous port fuel charge to make as much power as possible. Hope that helps!
__________________
|
07-15-2022, 06:21 PM | #28 | |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,811
|
Quote:
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
|
|
|
Post Reply
|
|
|