Zl1 diff fitment with offset bushings - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

fastblack10ss · 01-10-2020, 08:52 PM

Any pictures showing what you did to get the ZL1 diff with offset bushings into the cradle for a SS? I know the passenger flange is hitting on front so it will need grinding but top I cannot see clearly where interference is. I've tried using air hammer but cannot make much denting of the cradle.
Really would appreciate any tips and photos of how you got it to fit.

LaN- · 01-12-2020, 07:53 PM

Normally you do offset bushings to help the weaker ss axles. With the zl1 diff I’m not sure you need them anymore.

01-10-2020, 08:52 PM	#1
fastblack10ss Drives: 2010 SS M6 Join Date: Aug 2017 Location: Medina TN Posts: 21	Zl1 diff fitment with offset bushings Any pictures showing what you did to get the ZL1 diff with offset bushings into the cradle for a SS? I know the passenger flange is hitting on front so it will need grinding but top I cannot see clearly where interference is. I've tried using air hammer but cannot make much denting of the cradle. Really would appreciate any tips and photos of how you got it to fit. __________________ 2010 Camaro SS - TVS2300 - LT Headers - DSX Flex Fuel Sensor - ID1050X

01-12-2020, 07:53 PM	#2
LaN- Drives: 2014 SS Convertible Join Date: Jun 2015 Location: Michigan Posts: 175	Normally you do offset bushings to help the weaker ss axles. With the zl1 diff I’m not sure you need them anymore. __________________ Engine: LSA Conversion, Ported Heads, 1 7/8 headers, VMS 2.5 Cam, Roto Fab intake, ADM Scoop. BMR engine mounts, 3.91 628/525 Suspension: Koni orange, (BMR everything) 1" drop springs, toe rods, trailer arms, non adjustable LCR, FE4 sway bars, sub frame connectors, delrin sub frame bushing and upper control arm bushings. Front bushings.