0 offset wheels? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dyk-NO · 10-16-2013, 12:54 PM

offsets are on mm so that should be not be over or at a quarter of an inch. I;m not sure about the rears.

Witchdoctor92 · 10-17-2013, 11:01 AM

The rears are going to stick out 5mm more due to offset plus 1/2 inch due to wider wheel. that works out to about 3/4 of an inch. That is a little too aggressive for me, but i don't think it will go beyond the fender. have you already picked the wheels you like? If not, take a look at Forgestar, they build the wheels with custom offsets. Just tell the vendor what car and mods you have and they will build them. I did that with mine and they came out perfect.

Dyk-NO · 10-17-2013, 12:52 PM

I did look at forgestar but they dont have the step lid style (F10) on 19"s.

Witchdoctor92 · 10-17-2013, 04:13 PM

Not familiar with the wheels you are talking about, but Forgestar has the CF5V that they do not list on their website yet. It is what I am running in 19 and I love it.

Dyk-NO · 10-17-2013, 10:26 PM

Do you have any side profile shots that's not inclined? Coz you're parked on an inclined driveway makes the rear suspension drop hence the bigger wheel gap

Dyk-NO · 10-20-2013, 05:17 PM

So these are are wheels I'm getting they are 19x10.5 +40 offsets so will this be a good fit?

Witchdoctor92 · 10-20-2013, 06:57 PM

Pretty sure those will hit up front. Those would be 3/4 of an inch closer to the strut up front than mine and I only had about a 5/8 of an inch on mine.

Dyk-NO · 10-20-2013, 07:00 PM

They have 19x10.5 +25 can I just use those for the fronts instead?

Thank you for your constant input

blazzin1 · 10-20-2013, 07:01 PM

Those 10.5's would probably work okay on the rear, but for the fronts you would probably need to get the narrower 9.0" wheel. I would check with whoever is selling you the wheels, if they will guarantee fitment....then great.....if they WON'T guarantee fitment.....DON'T BUY THEM!!!

Dyk-NO · 10-20-2013, 07:43 PM

They said the +40 would fit but not for ss

Dyk-NO · 10-22-2013, 09:50 PM

okay just an update, I just got in touch with BestWheelDeals and they said neither the +25 nor the +40 would fit with the concept 1 cls 5.5

He gladly offered to have it custom machined but dont have any idea how much would it cost so I guess it's on to the next one. . .

Im here again with a question to you guys while waiting from dealer response

19x10.5 on all fours with +22? ??

Witchdoctor92 · 10-22-2013, 10:11 PM

Should clear the strut, but will stick out about 1/2 inch more than mine. Tell ya what I will put a plum line in my fender tomorrow and see how much room there is.

Dyk-NO · 10-22-2013, 10:21 PM

Well forgestar doesn't have a deep lip design on 19s and I'm going to lower my car with Coilovers anyways when I get the wheels. I'm also planning to put 302/30 on all fours

Btw, thanks for the input

10-16-2013, 12:54 PM	#15
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	offsets are on mm so that should be not be over or at a quarter of an inch. I;m not sure about the rears. __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator.

10-17-2013, 11:01 AM	#16
Witchdoctor92 Drives: 2012 1SS Black with white rally str Join Date: Jul 2011 Location: Corpus Christi, TX Posts: 611	The rears are going to stick out 5mm more due to offset plus 1/2 inch due to wider wheel. that works out to about 3/4 of an inch. That is a little too aggressive for me, but i don't think it will go beyond the fender. have you already picked the wheels you like? If not, take a look at Forgestar, they build the wheels with custom offsets. Just tell the vendor what car and mods you have and they will build them. I did that with mine and they came out perfect. __________________ It's good to be the King.

10-17-2013, 12:52 PM	#17
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	I did look at forgestar but they dont have the step lid style (F10) on 19"s. __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator.

10-17-2013, 04:13 PM	#18
Witchdoctor92 Drives: 2012 1SS Black with white rally str Join Date: Jul 2011 Location: Corpus Christi, TX Posts: 611	Not familiar with the wheels you are talking about, but Forgestar has the CF5V that they do not list on their website yet. It is what I am running in 19 and I love it. Attached Images __________________ It's good to be the King.

10-17-2013, 10:26 PM	#19
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	Do you have any side profile shots that's not inclined? Coz you're parked on an inclined driveway makes the rear suspension drop hence the bigger wheel gap __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator. Last edited by Dyk-NO; 10-18-2013 at 05:48 PM.

10-20-2013, 05:17 PM	#20
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	So these are are wheels I'm getting they are 19x10.5 +40 offsets so will this be a good fit? __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator.

10-20-2013, 06:57 PM	#21
Witchdoctor92 Drives: 2012 1SS Black with white rally str Join Date: Jul 2011 Location: Corpus Christi, TX Posts: 611	Pretty sure those will hit up front. Those would be 3/4 of an inch closer to the strut up front than mine and I only had about a 5/8 of an inch on mine. __________________ It's good to be the King.

10-20-2013, 07:00 PM	#22
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	They have 19x10.5 +25 can I just use those for the fronts instead? Thank you for your constant input __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator.

10-20-2013, 07:01 PM	#23
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	Those 10.5's would probably work okay on the rear, but for the fronts you would probably need to get the narrower 9.0" wheel. I would check with whoever is selling you the wheels, if they will guarantee fitment....then great.....if they WON'T guarantee fitment.....DON'T BUY THEM!!!

10-20-2013, 07:43 PM	#24
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	They said the +40 would fit but not for ss __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator.

10-22-2013, 09:50 PM	#25
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	okay just an update, I just got in touch with BestWheelDeals and they said neither the +25 nor the +40 would fit with the concept 1 cls 5.5 He gladly offered to have it custom machined but dont have any idea how much would it cost so I guess it's on to the next one. . . Im here again with a question to you guys while waiting from dealer response 19x10.5 on all fours with +22? ?? __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator.

10-22-2013, 10:11 PM	#26
Witchdoctor92 Drives: 2012 1SS Black with white rally str Join Date: Jul 2011 Location: Corpus Christi, TX Posts: 611	Should clear the strut, but will stick out about 1/2 inch more than mine. Tell ya what I will put a plum line in my fender tomorrow and see how much room there is. __________________ It's good to be the King.

10-22-2013, 10:21 PM	#27
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	Well forgestar doesn't have a deep lip design on 19s and I'm going to lower my car with Coilovers anyways when I get the wheels. I'm also planning to put 302/30 on all fours Btw, thanks for the input __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator.