Help CEL / Stabilitrak popped out - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dyk-NO · 10-12-2015, 10:59 AM

Thats an eye opener never knew they were so cheap, justordered one! THANKS!

Mgizzle · 10-12-2015, 06:39 PM

You had a misfire. Misfire causes cel and stability off. A restart always gets rid of it but stays in history for a few ignition cycles. You should figure out what is causing ur misfires.

Ragnar · 10-13-2015, 01:16 PM

Quote:

Originally Posted by 500rwhp

just had this happned to me last week. I had a cam done as well the week before.. Happned when I hit TC off and romped it... Shut the car off. Restarted the Stability and TC lights went away. THen went home and unplugged the battery. Back to normal it is. I have read countless threads on this issue. Unfortunatley dealer wont do anything casue you did tune your car. SO were both outta luck there. I did get code P0606. something to do with the ECM, luckly it hasn't happened again , but from what I hear nothing to worry about but the next time it does happned you shud take it to AutoZone and get the codes and look them up or send to your TUner.

thanks,

That code is PCM processor fault. Maybe someone can chime in and share some info about what the fix is.

500rwhp · 10-13-2015, 01:46 PM

Please do

Sent from my SM-N910T using Tapatalk

Dyk-NO · 10-13-2015, 01:53 PM

Update: I replicated the issue so I guess it only pops when I have turned off the stabilitrak completely and try to shift on the limiter even on 6k rpm really and it will go limp. And engine power reduced service stabilitrak is back on. So yep reseted it again by disconnecting the battery and it drives OK but it's definitely not pulling as hard as pre issue car, even when accelerating it doesn't burble as much anymore. I'm confused but yeah I'll just wait for my scanner and replicate it and see what's up.

Well my scanner will be here Thursday so I'll see what code I get.

Dyk-NO · 10-16-2015, 11:21 AM

Update: got the codes

P0606 = PCM Processor Fault

Hmm now what.

500rwhp · 10-16-2015, 11:23 AM

Same code is got. I reset it. Have not gotten since. But I also have not turned off TC. Sooo... Help me also. Ask the tuner... Let me no.

Sent from my SM-N910T using Tapatalk

10-12-2015, 10:59 AM	#15
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	Thats an eye opener never knew they were so cheap, justordered one! THANKS! __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator.

10-12-2015, 06:39 PM	#16
Mgizzle Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012 Location: Detroit Posts: 1,252	You had a misfire. Misfire causes cel and stability off. A restart always gets rid of it but stays in history for a few ignition cycles. You should figure out what is causing ur misfires. __________________ I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.

10-13-2015, 01:46 PM	#18
500rwhp Cocaine Drives: 2015 White 1SS/RS/1LENPPRECAROS Join Date: Sep 2015 Location: NC/SC Border Posts: 131	Please do Sent from my SM-N910T using Tapatalk __________________ FOUNDER - NY/NJ/PA Domestic Car Club Est.2013 Custom Grind Comp Cam 114 Lobe * Brian Tooley Push Rods, Springs * Kooks 1 7/8 LT Headers * Comp Cam Trunion Bearings * NGK TR55 Spark Plugs * Rotofab CAI * Dyno Tune * GM Performance Dual Mode Exhaust * GForce 1000 HP Axels* BMR 1" Lowering Springs, Trailing Arms, Toe Rods, Upper Control Arms* Full Rear Bushing Kit * 500/441

10-13-2015, 01:53 PM	#19
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	Update: I replicated the issue so I guess it only pops when I have turned off the stabilitrak completely and try to shift on the limiter even on 6k rpm really and it will go limp. And engine power reduced service stabilitrak is back on. So yep reseted it again by disconnecting the battery and it drives OK but it's definitely not pulling as hard as pre issue car, even when accelerating it doesn't burble as much anymore. I'm confused but yeah I'll just wait for my scanner and replicate it and see what's up. Well my scanner will be here Thursday so I'll see what code I get. __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator. Last edited by Dyk-NO; 10-13-2015 at 02:07 PM.

10-16-2015, 11:21 AM	#20
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	Update: got the codes P0606 = PCM Processor Fault Hmm now what. __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator.

10-16-2015, 11:23 AM	#21
500rwhp Cocaine Drives: 2015 White 1SS/RS/1LENPPRECAROS Join Date: Sep 2015 Location: NC/SC Border Posts: 131	Same code is got. I reset it. Have not gotten since. But I also have not turned off TC. Sooo... Help me also. Ask the tuner... Let me no. Sent from my SM-N910T using Tapatalk __________________ FOUNDER - NY/NJ/PA Domestic Car Club Est.2013 Custom Grind Comp Cam 114 Lobe * Brian Tooley Push Rods, Springs * Kooks 1 7/8 LT Headers * Comp Cam Trunion Bearings * NGK TR55 Spark Plugs * Rotofab CAI * Dyno Tune * GM Performance Dual Mode Exhaust * GForce 1000 HP Axels* BMR 1" Lowering Springs, Trailing Arms, Toe Rods, Upper Control Arms* Full Rear Bushing Kit * 500/441