Catch can and turbo question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Carpetguy · 10-15-2018, 01:16 PM

Had to weld up my header.Notice the rear driver side oil vent tube was off.Assuming it had a cap on it .
Rx catch can i have has a 2 tubes to the front of the motor and one vent tube to nothing going on the side of the can.
Turbo filter has a tube going to passenger side valve cover.

Is that right? Or should I have a T or something going to rear drivers side?
Thanks

Elite Engineering · 10-15-2018, 02:56 PM

Can you share pictures of the can? It sounds like one of the old RX cans and you will need a bit different configuration for your application. We can guide you.

Here are the illustrations from Turbonetics on doing this correctly:

Let us know more and were happy to guide you.

Carpetguy · 10-15-2018, 03:13 PM

Thanks for the other pictures

10-15-2018, 01:16 PM	#1
Carpetguy Drives: 2011 Join Date: Sep 2017 Location: Illinois Posts: 120	Catch can and turbo question Had to weld up my header.Notice the rear driver side oil vent tube was off.Assuming it had a cap on it . Rx catch can i have has a 2 tubes to the front of the motor and one vent tube to nothing going on the side of the can. Turbo filter has a tube going to passenger side valve cover. Is that right? Or should I have a T or something going to rear drivers side? Thanks Last edited by Carpetguy; 10-15-2018 at 02:54 PM.

10-15-2018, 03:13 PM	#3
Carpetguy Drives: 2011 Join Date: Sep 2017 Location: Illinois Posts: 120	Thanks for the other pictures Attached Images

10-15-2018, 02:56 PM	#2
Elite Engineering Drives: 2010 Camaro Join Date: Nov 2009 Location: Denver Posts: 1,381	Can you share pictures of the can? It sounds like one of the old RX cans and you will need a bit different configuration for your application. We can guide you. Here are the illustrations from Turbonetics on doing this correctly: Let us know more and were happy to guide you.