05-25-2018, 03:24 PM | #1 |
Already bought. AFR and Boost gauges
I have got my self gauges and pillar pod already, thanks everyone.
Preparing for supercharger install and gathering parts required/recommended, So im looking for Gauges and Pods avaialble for Air Fuel and Boost if possible. Also willing for single pods/gauges or even Dual. Let me know what you guys have. Thanks!
__________________
Follow Me @ssatann_ss Last edited by jaysanti; 07-02-2018 at 02:20 PM. |
|
05-25-2018, 11:29 PM | #2 |
Drives: Turbocharged 408 Join Date: Feb 2014
Location: Houston tx
Posts: 105
|
I have the dual adm afr and boost gauge that goes above the steering wheel if interested. The afr needs to be resoldered to the board but you may be able to work something out with adm to get it fixed. Text me if interested 832-630-8231
|
05-26-2018, 05:59 PM | #3 |
Drives: 2023 Camaro SS 1LE on order Join Date: Dec 2014
Location: Bowling green Va
Posts: 293
|
If op isn't interested I am
__________________
2017 Camaro SS 50th anniversary, I sold it but 2010 Camaro SS, whipple, cam, full bolt ons and full exhaust made 739/656 RWHP/TQ on 93 pump gas
|
05-29-2018, 08:50 AM | #4 |
Drives: 1999 Camaro SS Join Date: Apr 2016
Location: Denver
Posts: 275
|
I have an SLP boost gauge that I am getting ready to remove. Let me know if your interested
|
06-04-2018, 10:29 PM | #5 |
BUMBL Z
|
I have a 0-15psi AEM X series digital boost gauge that I can pull out, I have to upgrade anyway (running more than 15lbs lmao)
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
06-05-2018, 12:44 AM | #6 |
Drives: 2015 camaro 1ss Join Date: May 2016
Location: DALLAS
Posts: 46
|
I have a friend selling his single pod aeroforce gauge. Message me if your interested so I can send you his info
|
06-05-2018, 03:50 PM | #7 |
Hey Aldo, I appreciate you dealing with me via text but im worried since i have no clue about soldering that i might not make this work. ADM told me to resolder with a pen but thats all that was said. Im worried I might damage and find myself at a loss.
__________________
Follow Me @ssatann_ss |
|
06-05-2018, 03:52 PM | #8 |
I might take you up on this I dont think I'll be going over 15psi for awhile and if I do I can upgrade later. Send me a PM on the best price you can do shipped 90248 Thanks Bud
__________________
Follow Me @ssatann_ss |
|
06-05-2018, 03:53 PM | #9 |
Message sent. Thanks
__________________
Follow Me @ssatann_ss |
|
06-09-2018, 02:46 AM | #10 |
Drives: Turbocharged 408 Join Date: Feb 2014
Location: Houston tx
Posts: 105
|
Try finding an electronics repair store. Its really not hard and completely know where your coming from. Its super simple as long as you dont sit there and heat it up for a minute.
|
06-24-2018, 08:45 PM | #11 |
BUMBL Z
|
Hey man, sent you a pm
Sent from my Pixel XL using Tapatalk
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
07-02-2018, 02:19 PM | #12 |
I already got a hold of Gauges and Pillar Pod thanks everyone
__________________
Follow Me @ssatann_ss |
|
|
|
|
|