vvt cam work in florida? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tanur420 · 11-23-2013, 09:23 PM

Do we have anyone installing and tuning vvt in fl?

tanur420 · 11-23-2013, 09:24 PM

As a side note, aside from cam what else would I want to replace while im in there?

Supercharged SS · 11-23-2013, 09:27 PM

Matt at Florida Speed and power. He knows and can elaborate on the vvt cam install better than I can. Best service in this industry. Plus a 24/7 help line.

Muddflap · 11-24-2013, 01:35 AM

+1 for Matt at Florida Speed and Power

flyer08 · 11-24-2013, 12:35 PM

You are going to need to replace all the basic parts needed for a cam and depending how big a cam you go you'll want a stall. Matt posted a build thread in the v8 section of my car, I'd link to it but on my phone

Matt @ FSP · 11-24-2013, 01:01 PM

+1 FSP.. .Oh wait

Thanks guys for the kind words. I'd be glad to go into any VVT discussions, basically the best route to go is of course change the DoD lifters out, use the comp cams phaser limiter set, add a nice tight torque converter for a decent sized VVT cam and away you go. You can get some cams that will work with the stock converter, but you are much better off going with an aftermarket higher stall.

If you want to send me a PM with your goals/intentions , name and email I'll send you over a quote. We have just completed a couple of VVT and LS3 conversions.

Tampa Tuning · 11-29-2013, 07:53 AM

We can help you with that. After your install, you will have a quality calibration of your car afterwards. Its no cut and pasting a tune and a couple WOT dyno pulls and your tune is done in 20 minutes.

Its a several hour process to calibrate a vehicle

Erik@lashway · 12-10-2013, 01:05 AM

Once again, reputable shops chiming in. Just glad to be among them. We have VVT camshafts, and parts needed in stock, ready to install

Erik@Lashway

Modern07 · 12-13-2013, 07:31 PM

Quote:

Originally Posted by Supercharged SS

Matt at Florida Speed and power. He knows and can elaborate on the vvt cam install better than I can. Best service in this industry. Plus a 24/7 help line.

I'll always remember my 2 hour lesson over the phone on the methanol injection system I wanted on my car and how it was going to work - patience of a saint that Matt guy haha!

Awesome shop for sure and you wouldn't be disappointed going to FSP - I know I wasn't

Camper · 12-13-2013, 07:31 PM

Matt Sorian@FSP
easily one of the best tuners in the LSX community and has always been there when ive needed him. We have spent countless hours at all times of the night dialing in my 1kwp car and is always there at a moments notice.

I would have honestly demodded my car if it wasnt for him.

Motion427 · 12-13-2013, 07:46 PM

+1 for FSP

VanquisherSS · 12-13-2013, 08:13 PM

Quote:

Originally Posted by Supercharged SS

Best service in this industry. Plus a 24/7 help line.

So true

02bluess · 12-13-2013, 08:19 PM

I live in Illinois... my car is in Florida with Matt... nuff said

Paul...

J-Rod6410 · 12-13-2013, 08:38 PM

Im in Houston the land of LS tuners and Matt @ FSP takes care of mine all the way from Florida! If you are local to him you are a lucky man!! Send him a pm here and he will take care of you!

Sent from J-Rod's Continuum Transfunctioner

11-23-2013, 09:23 PM	#1
tanur420 Drives: 2011 Camaro SS Join Date: Apr 2012 Location: Jacksonville FL Posts: 348	vvt cam work in florida? Do we have anyone installing and tuning vvt in fl? __________________

11-23-2013, 09:24 PM	#2
tanur420 Drives: 2011 Camaro SS Join Date: Apr 2012 Location: Jacksonville FL Posts: 348	As a side note, aside from cam what else would I want to replace while im in there? __________________

11-24-2013, 01:35 AM	#4
Muddflap Drives: 2010 Camaro SS Join Date: Apr 2013 Location: Longview, Tx Posts: 797	+1 for Matt at Florida Speed and Power __________________ TSP 1 7/8 LT, ADM Race Cold Air w/ Race Scoop, GPI SS3 LS3 Cam, Powerbond UD, 3.91 Gears, GPI Posi Mod. 498RWHP/451RWTQ

11-29-2013, 07:53 AM	#7
Tampa Tuning Account Suspended Drives: TAMPA TUNING FACEBOOK & INSTAGRAM Join Date: Oct 2010 Location: Tampa, Fl Posts: 3,044	We can help you with that. After your install, you will have a quality calibration of your car afterwards. Its no cut and pasting a tune and a couple WOT dyno pulls and your tune is done in 20 minutes. Its a several hour process to calibrate a vehicle Last edited by Tampa Tuning; 10-15-2014 at 05:32 PM.

12-13-2013, 08:19 PM	#13
02bluess Camaro Addict Drives: 2014 Camaro ZL1 SIM A6 Join Date: Sep 2008 Location: Normal, IL Posts: 367	I live in Illinois... my car is in Florida with Matt... nuff said Paul... __________________ 2014 Camaro ZL1 SIM A6: Rotofab, VMax TB, 22% Lower Pulley, Stainless Power 1 7/8, Cat Delete, ID850s, DSteck Flex Fuel Kit, DSteck Supplemental Fuel Pump, DSteck E85 Tune Best Timeslip: TBD

11-23-2013, 09:27 PM	#3
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,927	Matt at Florida Speed and power. He knows and can elaborate on the vvt cam install better than I can. Best service in this industry. Plus a 24/7 help line.

11-24-2013, 12:35 PM	#5
flyer08 Account Suspended Drives: 2010 2SS/RS Join Date: Jun 2009 Location: Texas Posts: 3,418	You are going to need to replace all the basic parts needed for a cam and depending how big a cam you go you'll want a stall. Matt posted a build thread in the v8 section of my car, I'd link to it but on my phone

11-24-2013, 01:01 PM	#6
Matt @ FSP Drives: 2011 Camaro SS Join Date: Dec 2012 Location: Bradenton, FL Posts: 2,610	+1 FSP.. .Oh wait Thanks guys for the kind words. I'd be glad to go into any VVT discussions, basically the best route to go is of course change the DoD lifters out, use the comp cams phaser limiter set, add a nice tight torque converter for a decent sized VVT cam and away you go. You can get some cams that will work with the stock converter, but you are much better off going with an aftermarket higher stall. If you want to send me a PM with your goals/intentions , name and email I'll send you over a quote. We have just completed a couple of VVT and LS3 conversions.

12-10-2013, 01:05 AM	#8
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	Once again, reputable shops chiming in. Just glad to be among them. We have VVT camshafts, and parts needed in stock, ready to install Erik@Lashway

12-13-2013, 07:31 PM	#10
Camper Banned Drives: 10' 2SS LS3 M6 Join Date: May 2012 Location: Phoenix,AZ Posts: 1,370	Matt Sorian@FSP easily one of the best tuners in the LSX community and has always been there when ive needed him. We have spent countless hours at all times of the night dialing in my 1kwp car and is always there at a moments notice. I would have honestly demodded my car if it wasnt for him.

12-13-2013, 07:46 PM	#11
Motion427 Account Suspended Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011 Location: NB,Canada Posts: 834	+1 for FSP

12-13-2013, 08:38 PM	#14
J-Rod6410 M6 9 second club Drives: A 4000 Lb BeaSSt Join Date: Jul 2009 Location: Crackin Azz on a hi-way near you Posts: 1,033 View My Garage	Im in Houston the land of LS tuners and Matt @ FSP takes care of mine all the way from Florida! If you are local to him you are a lucky man!! Send him a pm here and he will take care of you! Sent from J-Rod's Continuum Transfunctioner __________________ TEAM LS3 Best pass: 9.61 @ 146 with M6 TBDRWHP TBDRWTQ ECS S/C 408, YSi, m6, Mantic Triple, ZL1 diff #BuiltByJRod.... J-Rod's Speed Shop.... Tuned by: Matt Sorian @ MS Tuning Check out my youtube channel: http://www.youtube.com/user/6410Jrod Follow me on Instagram: @J_Rod6410