LMR's Punisher Package makes 600rwhp Naturally Aspirated!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Late Model Racecraft · 10-01-2009, 04:32 PM

Here is a video of our "Punisher" package installed on a 2010 camaro. This is an LS7 440ci shortblock with LMR stage 3 LS7 cylinder heads. It put down 592rwhp! Enjoy

1320junkie · 10-01-2009, 04:37 PM

That's what Im talking about!! Do you have a thread on here on that build or anywhere I can se that that build consists of?

Late Model Racecraft · 10-01-2009, 04:57 PM

Quote:

Originally Posted by 1320junkie

That's what Im talking about!! Do you have a thread on her on that build or anywhere I can se that that build consists of?

Remove and Reinstall Engine
LMR Cold Air Induction System
American Racing 1 7/8 stainless Steel Headers
American Racing connection pipes with high flow cats
02 Extensions
NGK Spark Plugs
MSD 8.5mm Spark Plug Wires
LS2/7 Thermostat
LS7 440CID. Shortblock: New GM LS7 block, Callies 6.125" H Beam rods w/ ARP 2000 7/16" bolts, Wiseco custom 4.135" forged pistons, NPR stainless chrome rings 1.2 1.2 3mm (for high heat applications), Clevite MS 2199 H main brgs, Clevite CB 663 H rod brgs, Dura Bond cam brgs and ARP main studs.
LSX Comp Cam
Roll Master Double roller timing set w/ torington bearing & nitrided gears.
Melling High Volum Oil Pump
Comp OE lifters
Water pump gaskets, Oil Pump inlet Tube, Front Cover, Cranshaft front seal, Oil pump inlet tube O-ring
Rear main cover gasket and rear main seal
Stage 3 LS7 Cylinder Heads with titainum intake valves and springs good to .670 lift
Cometic Head Gaskets
ARP Head Bolts
Comp Hardened Pushrods
LS Valve cover gasket set
Oil Pan Gasket for 7.0L
Assemble Longblock
Underdrive Pulley Kit
LS7 Crank Bolt
RPS Twin Disk Clutch(CARBON)
Slave Cylinder
F.A.S.T. 102mm intake Match Ported to Cylinder Heads
50lb Injectors
Magnaflow catback Exhaust System
Synthetic Motor Oil
Oil Filter
Coolant
Shop Supplies
Custom Dyno Tune

Miketebo22 · 10-01-2009, 05:14 PM

thats out-fukin-standing! feel like doing it to another car let me know!

Windy City · 10-01-2009, 05:16 PM

Cost?

Late Model Racecraft · 10-01-2009, 05:20 PM

Quote:

Originally Posted by Windy City

Cost?

The "Punisher" package starts at $21,999.99 but the package you are viewing with upgraded clutch/intake manifold/fuel system retails for $25k.

Late Model Racecraft · 10-05-2009, 02:17 PM

Quote:

Originally Posted by Miketebo22

thats out-fukin-standing! feel like doing it to another car let me know!

We do have a enclosed trailer transport company that can pick your car up and re deliver it to you once we are finished! Give me a call at the shop if you have any questions.

JJ2010 · 10-05-2009, 04:07 PM

Carlos Garza · 10-05-2009, 07:18 PM

I'm out of words... I really don't know what to say... the only thing that comes to my mind is awesome, that's truly awesome.

tones2SS · 10-06-2009, 11:03 AM

VERY NICE!!! I love N/A cars with gobs of horses!!
I see you guys are using the new FAST 102mm intake. VERY NICE!!

HIMACHI · 10-14-2009, 09:14 AM

Killer set up, Na power is sweet!

PaiN · 10-15-2009, 09:11 PM

Big thanks to the guys up at LMR. The video doesn't do it justice! I just got out of my procharged a6 vette that easliy made over 600rwhp to do this project, and I'm loving the hell out of it! Nothing like big cubes, gobs of torque, and a rowdy lope!

MARO-KEEN · 10-16-2009, 11:02 AM

Larry, I didn't know you had a 5th gen till I saw this post. Sweet set up!

Patrick

Hennessey Performance · 10-16-2009, 11:58 AM

Very cool. When does the Twisted Slayer Punisher package come out? Dee Snyder would be the perfect buyer!

Seriously, nice work guys. You should come out to Lonestar tomorrow and the weather should be the best in 6 months!

10-01-2009, 05:14 PM	#4
Miketebo22 Iceman Drives: SOLD #20,908 SS waiting for ZL1 Join Date: Apr 2009 Location: Rapid City SD Posts: 557	thats out-fukin-standing! feel like doing it to another car let me know! __________________ 2G1FT1EW8A9120908

10-01-2009, 05:16 PM	#5
Windy City Drives: Not enough room here! Join Date: Jul 2009 Location: Plainfield, IL Posts: 1,017	Cost? __________________ BEWARE OF THE LPE BROTHERHOOD! Remember: You can sleep in your car, but you can't drive your house!

10-14-2009, 09:14 AM	#11
HIMACHI Drives: 2010 2SS/RS M6 Join Date: Jun 2009 Location: Richmond, Tx Posts: 12	Killer set up, Na power is sweet! __________________ 2010 RY 2SS/RS M6

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LMR's Twisted Slayer Package makes 622rwhp!!	Late Model Racecraft	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	17	10-14-2009 09:15 AM
LMR's "Punisher 440ci" Package makes over 600rwhp NA in corvette	Late Model Racecraft	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	20	09-02-2009 05:38 PM
Late Model Racecraft's Street Stalker Package makes OVER 500rwhp Naturally Aspirated	Late Model Racecraft	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	103	08-25-2009 12:03 AM
LS3 Cam Package makes over 500rwhp!!	Late Model Racecraft	V8 Bolt-Ons & Tunes	45	07-19-2009 01:58 PM

10-01-2009, 04:37 PM	#2
1320junkie Drives: The Imperial Army Join Date: Feb 2009 Location: The Darkside Posts: 15,742	That's what Im talking about!! Do you have a thread on here on that build or anywhere I can se that that build consists of?

10-05-2009, 04:07 PM	#8
JJ2010 Drives: 2010 Camaro SS Join Date: Oct 2008 Location: Smithfield,NC Posts: 1,203

10-05-2009, 07:18 PM	#9
Carlos Garza Drives: 2010 Camaro SS RS Join Date: May 2009 Location: USA Posts: 236	I'm out of words... I really don't know what to say... the only thing that comes to my mind is awesome, that's truly awesome.

10-06-2009, 11:03 AM	#10
tones2SS Drives: '13 Roush S3 '16 Ram Sport 4X4 Join Date: Apr 2009 Location: Massachusetts Posts: 3,100	VERY NICE!!! I love N/A cars with gobs of horses!! I see you guys are using the new FAST 102mm intake. VERY NICE!!

10-15-2009, 09:11 PM	#12
PaiN Drives: Mine Join Date: Aug 2009 Location: Texas Posts: 5	Big thanks to the guys up at LMR. The video doesn't do it justice! I just got out of my procharged a6 vette that easliy made over 600rwhp to do this project, and I'm loving the hell out of it! Nothing like big cubes, gobs of torque, and a rowdy lope!

10-16-2009, 11:02 AM	#13
MARO-KEEN Drives: 2001 Camaro Join Date: Mar 2009 Location: Richmond, Tx Posts: 80	Larry, I didn't know you had a 5th gen till I saw this post. Sweet set up! Patrick

10-16-2009, 11:58 AM	#14
Hennessey Performance Drives: THE EXORCIST Join Date: May 2009 Location: Sealy, TX Posts: 388	Very cool. When does the Twisted Slayer Punisher package come out? Dee Snyder would be the perfect buyer! Seriously, nice work guys. You should come out to Lonestar tomorrow and the weather should be the best in 6 months!