3 small razor cuts on front drivers seat - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

redirish · 03-19-2010, 12:21 PM

I took my car to work today and drove it with a co worker to lunch. As I got out of the car and looked down on the drivers seat where the sun was shining, I saw something on my seat on the left side. I tried to rub it off and found out it was three small razor cuts! I just called my dealer and left her a voice message. I just have the car 3 weeks and drove it 3 times. I am the only on to sit in the car and there is no way I would have anything in my pocket that woud make razor cuts. I guessing when the dealer was removing the plastic, they cut the seat.

Scrappy Doo · 03-19-2010, 12:23 PM

Ouch. Not good.

CamaroKen · 03-19-2010, 12:23 PM

that is the reason I told the dealer not to remove any plastic or anything else on my car, I did that myself so I could only blame myself if anything happened. I did not even let them wash it, just do their normal inspection to make sure things were right, then I took it from there.

redirish · 03-19-2010, 02:03 PM

I just talked to my sales women and she hooked me up with the service department. I am bringing my car in Monday for them to look at it. To be continued...

zerox · 03-19-2010, 02:20 PM

Wow if that was the case, that dealer is a moron. It's common senses.... Why not just rip the plastic off with your bare hands?

Chris-10 · 03-19-2010, 02:27 PM

good luck, hope it works out

BlackSS831 · 03-19-2010, 02:44 PM

Sometimes it's scary watching them PDI cars ripping the interior out with razor blades... lol

redirish · 03-19-2010, 05:22 PM

Quote:

Originally Posted by zerox

Wow if that was the case, that dealer is a moron. It's common senses.... Why not just rip the plastic off with your bear hands?

I agree, I don't know if the sales women did it or someone in the service department. If I had to do it over again I would have told them not to touch the car and I would pick it up as is.

Lbness · 03-19-2010, 05:33 PM

I worked with dealers and the wash rack is no place for your new car do it yourself... I had to remove the carbon from the train ride ! And was happy to be the one doing it

ron10 · 03-19-2010, 05:58 PM

hope they take care of it,with no problems.

Sheitskees · 03-19-2010, 06:01 PM

Quote:

Originally Posted by zerox

Wow if that was the case, that dealer is a moron. It's common senses.... Why not just rip the plastic off with your bear hands?

You have bear hands?!?!

DevilKnightFalcon · 03-19-2010, 07:46 PM

Good luck....my guess is they will tell you sorry but you signed off on the initial inspection.

DCKRS · 03-19-2010, 07:59 PM

Quote:

Originally Posted by Sheitskees

You have bear hands?!?!

I wish i had bear hands!

zerox · 03-19-2010, 08:38 PM

lol whoops FIXED

03-19-2010, 12:21 PM	#1
redirish Drives: 10' IOM 2SS/RS/M6 Join Date: Sep 2009 Location: New Jersey Posts: 1,354 View My Garage	3 small razor cuts on front drivers seat I took my car to work today and drove it with a co worker to lunch. As I got out of the car and looked down on the drivers seat where the sun was shining, I saw something on my seat on the left side. I tried to rub it off and found out it was three small razor cuts! I just called my dealer and left her a voice message. I just have the car 3 weeks and drove it 3 times. I am the only on to sit in the car and there is no way I would have anything in my pocket that woud make razor cuts. I guessing when the dealer was removing the plastic, they cut the seat.

03-19-2010, 02:20 PM	#5
zerox Drives: 2010 2SS RS Bumblebee Join Date: Mar 2010 Location: Canada Eh! Posts: 440	Wow if that was the case, that dealer is a moron. It's common senses.... Why not just rip the plastic off with your bare hands? __________________ Last edited by zerox; 03-19-2010 at 08:38 PM.

03-19-2010, 02:27 PM	#6
Chris-10 Drives: 2ss/rs vr 6m Join Date: Mar 2009 Location: New Port Richey,fl Posts: 2,831	good luck, hope it works out __________________ My build thread.click the pic. COTW 10/24/11

03-19-2010, 05:33 PM	#9
Lbness Drives: 2010 ss M6 Aqua Blue Join Date: Mar 2010 Location: Gulf Coast Posts: 323 View My Garage	I also picked mine up before make ready I worked with dealers and the wash rack is no place for your new car do it yourself... I had to remove the carbon from the train ride ! And was happy to be the one doing it __________________ Camaros -- 1 of 6 2002 B4-c M6 intimidators and 2010 Aqua Blue ss M6 3499 of 3612 Stipes on Tail Only CAI -Barton Shifter and a few 12v mods Added wheels tires and a sub and I am a happy camper ..although I want a SC Make your girls happy too http://www.lisafreede.com/http://www...s/thumbsup.gif

03-19-2010, 07:46 PM	#12
DevilKnightFalcon Drives: 2010 Camaro 2LT/RS Join Date: Feb 2009 Location: Phoenix, AZ Posts: 1,406 View My Garage	Good luck....my guess is they will tell you sorry but you signed off on the initial inspection. __________________ MBRP Catback/Magnaflow Resonated X/Airraid V2 CAI/Dash ABL/Interior LEDs/Custom Paint/Jet Coated American Racing LT Headers/High Flow cats/Trifecta Tune

03-19-2010, 12:23 PM	#2
Scrappy Doo Drives: Callaway Rogue Join Date: Jul 2009 Location: W8n 4 Snow, Minnesota Posts: 4,738	Ouch. Not good.

03-19-2010, 12:23 PM	#3
CamaroKen Drives: 2010 SIM SS Join Date: Mar 2009 Location: Kansas Posts: 102	that is the reason I told the dealer not to remove any plastic or anything else on my car, I did that myself so I could only blame myself if anything happened. I did not even let them wash it, just do their normal inspection to make sure things were right, then I took it from there.

03-19-2010, 02:03 PM	#4
redirish Drives: 10' IOM 2SS/RS/M6 Join Date: Sep 2009 Location: New Jersey Posts: 1,354 View My Garage	I just talked to my sales women and she hooked me up with the service department. I am bringing my car in Monday for them to look at it. To be continued...

03-19-2010, 02:44 PM	#7
BlackSS831 Drives: 2008 Lexus IS350 Join Date: Jan 2010 Location: San Diego Posts: 264	Sometimes it's scary watching them PDI cars ripping the interior out with razor blades... lol

03-19-2010, 05:58 PM	#10
ron10 Drives: 2010 2SS IOM L99 Join Date: Jan 2010 Location: LOUISVILLE,KY.. Posts: 7,545	hope they take care of it,with no problems.

03-19-2010, 08:38 PM	#14
zerox Drives: 2010 2SS RS Bumblebee Join Date: Mar 2010 Location: Canada Eh! Posts: 440	lol whoops FIXED __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Creaking Drivers Seat	GLBL WMR	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	57	09-19-2013 08:56 PM
Driver's seat squeaks	madmikey	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	2	09-23-2009 11:19 AM
Seat trim: leather-appointed FRONT seats???	sykb47l	5th Gen Camaro SS LS LT General Discussions	39	10-12-2008 08:16 PM
A little more pricing reassurance.	Grape Ape	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	34	04-22-2008 08:05 AM
Pricing/optioning guesstimate	KILLER74Z28	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	156	02-24-2008 04:33 PM