You are browsing camaro5 
 |
|
08-01-2024, 07:44 AM
|
#1 |
 
Drives: 2013 camaro 2ss 1le Join Date: May 2020
Location: las vegas
Posts: 63
|
Broken hanger for chin spoiler
not entirely sure how this happened, but one of the clip things for my bumper spoiler (2ss 1le) is broken and now it's flapping while I'm driving and scuffing the bumper. is it possible just to replace the clippy hanger doodad thing by itself, or do I have to buy a whole new spoiler assembly?
__________________
2013 Camaro 2SS 1LE w/ RS [Rally Yellow]
Stock + Speed Engineering 1 7/8 LTHs w/ TSP HFCs, Roto-Fab CAI, Innovate DLG1/LC2 Dual WBo2, Smoked Wicker Bill, Self Tuned w/ HPTuners |
|
|
|
08-01-2024, 09:58 AM
|
#2 |
|
Tri-County Camaro SWFL
|
The clip on the bumper itself is just riveted in. If it's attachment on the splitter, which it doesn't look like then no. I hit a cone during autocross and broke both the clip and attachment. I replaced the bumper clip and after that noticed the splitter no longer had an attachment.
https://www.camaro5.com/forums/showthread.php?t=441137
__________________
|
|
|
|
|
08-05-2024, 10:08 PM
|
#3 |
|
Drives: 2013 camaro 2ss 1le Join Date: May 2020
Location: las vegas
Posts: 63
|
good link. after a couple minutes of further searching, i cant seem to find the riveted on bits on their own, only as a kit including rivets and all 22889290, or as a complete package with a splitter 22950576. the attachment kit is only 120-150 bucks, but kind of a waste since i only need like 15% of what it includes. with that being the case, ill probably try to stick it back on with some vhb tape for the time being.
__________________
2013 Camaro 2SS 1LE w/ RS [Rally Yellow]
Stock + Speed Engineering 1 7/8 LTHs w/ TSP HFCs, Roto-Fab CAI, Innovate DLG1/LC2 Dual WBo2, Smoked Wicker Bill, Self Tuned w/ HPTuners |
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
