You are browsing camaro5 
 |
|
02-14-2011, 09:27 AM
|
#1 |
|
2011 Camaro Newbie
Drives: 2011 Camaro 2SS (With RS package) Join Date: Dec 2010
Location: Dallas, Texas
Posts: 120
|
New tint questions
Well I just had the tint done (20 / 35)...I love the look it gives the car...
2 things : On one of the door windows I see what basically resembles a cloud - possibly from the glue...is this normal? Will it go away with time? I tried to get it in a pic but it didn't turn out... I upgraded to the 3M film with the lifetime warranty so I guess if it doesn't it will be going back...grrrrr... Also they put a sticker on my window controls that says "Do not roll down windows for 3-5 days while film cures"....well....which is it, 3 or 5?!?!? Weird... Last edited by jmhenry5150; 02-14-2011 at 10:06 AM. |
|
|
|
02-14-2011, 09:59 AM
|
#2 |
    |
With the way our windows close, if they shut your does right after doing the tint, the seal will cause a cloudy line about a half inch from the top of the window. At least thats where mine was, some cloudy spots went away after time, but if bubbles or any major flaws are not taken care of soon, they will stay.
I'd take it back until it looks right! |
|
|
|
|
02-14-2011, 10:16 AM
|
#3 |
 
Drives: 2010 RJT 2SS/RS, 2001 Ford Focus Join Date: Jul 2007
Location: Easton, Massachusetts
Posts: 193
|
I learned this the hard way, but just a tip, once your tint is done, I left my windows down just enough not to let the window indexing work for 2 days. It is also covered at night thought. I had to have it re-done because the indexing wrecked the edge on the driver's side from getting in and out of the car.
|
|
|
|
|
02-14-2011, 10:30 AM
|
#4 |
 
Drives: Synergy Green 2SS/RS/HURST Join Date: Aug 2010
Location: Saratoga Springs, NY
Posts: 442
|
The cloudiness is normal while it dries. The sticker says 3-5? I have always waited a minimum of 7 days just to make sure there is no chance of the window seal even slightly moving the tint. I've had 9 vehicles done over the years and never a problem using this method. Unless you live an extreme hot climate then I'd wait 7 days just to be safe.
John 
__________________
2011 2SS/RS - Factory Hurst - Synergy Green - Cyber Gray Rally Stripes - Jet Black Interior - Born on 10/4/2010
 2G1FT1EW7B9128807 Ordered: 8/6/2010 1100: 8/6/2010 2000: 8/23/2010 2051: 8/10/2010 2500: 8/24/2010 3000: 8/25/2010 3100: 9/8/2010 3300: 9/8/2010 3400: 9/11/2010 3800: 10/4/2010 4000: 10/4/2010 4200: 10/4/2010 5000: 10/13/2010 6000: 10/14/2010 |
|
|
|
|
02-14-2011, 11:09 AM
|
#5 |
|
They'll be fine you just gotta let it dry and wait the full 5 days to be safe. Now when you got them tinted do they tint the whole window as in Pulled the door apart to get to the whole window or no?
__________________
ordered dec 15 2008 picked up on june 8 2009.
upgrades kooks 1 7/8" LTH w/ deleted cats, corsa exhaust, hurst short throw shifter stage 3 comp cam, 3.91 gears ecs kit blower, meth injection, upgraded axles, drive shaft, McLeod rxt clutch, fully forged 416ci stroker all installed and dyno tuned by slowhawk performance in bridgewater ma. |
|
|
|
|
02-14-2011, 01:15 PM
|
#6 |
|
2011 Camaro Newbie
Drives: 2011 Camaro 2SS (With RS package) Join Date: Dec 2010
Location: Dallas, Texas
Posts: 120
|
They said they know all about the window indexing and installed the tint further down than they usually do...
I doubt they took the door apart tho... Last edited by jmhenry5150; 02-14-2011 at 03:19 PM. |
|
|
|
|
02-14-2011, 03:36 PM
|
#7 |
|
Account Suspended
Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009
Location: CA
Posts: 5,094
|
3-5 days days....depends where you live. In sunny SoCal, 3 days is good but doesn't hurt any to wait longer. The only time I ever open my window is when I reach out to scan my badge to open the gate at work.
|
|
|
|
|
02-14-2011, 04:20 PM
|
#8 |
 Drives: 2010 Camaro 2SS/RS SIM Join Date: Apr 2009
Location: Calgary, Alberta
Posts: 1,697
|
There is a place up here in Calgary that takes the door panels off when they do tinting on almost everything. One of the guys at work went in to talk to them about something when they were in the middle of doing his car and he just about had a fit because the panels were off. LOL
|
|
|
|
|
02-14-2011, 05:31 PM
|
#9 |
|
MARO MAN
Drives: Orange 2010 Camaro 2RS Join Date: Feb 2011
Location: Baton Rouge , LA
Posts: 511
|
dont worry i accidentley rolled mine down 3 times within the first 2 days and there fine (year later)
|
|
|
|
|
02-14-2011, 05:32 PM
|
#10 |
|
2011 Camaro Newbie
Drives: 2011 Camaro 2SS (With RS package) Join Date: Dec 2010
Location: Dallas, Texas
Posts: 120
|
I'm just worrying over this "cloud"...
I hope it all goes away... |
|
|
|
|
02-14-2011, 08:12 PM
|
#11 |
|
Drives: Synergy Green 2SS/RS/HURST Join Date: Aug 2010
Location: Saratoga Springs, NY
Posts: 442
|
The tint installer obviously did'nt explain things at all. Like I said earlier the cloudiness is normal. It's actually water that has to dry out between the film & the glass. It should go away in about a week or so. If for some unknown reason it doesn't then take it back & have them re-do it. Any tint installer worth a damn will almost always give a warranty. The guy that has done the majority of my vehicles gives a lifetime warranty against cracking peeling & bubbles & haze. Just relax it'll be fine in a few days.
John 
__________________
2011 2SS/RS - Factory Hurst - Synergy Green - Cyber Gray Rally Stripes - Jet Black Interior - Born on 10/4/2010
2G1FT1EW7B9128807 Ordered: 8/6/2010 1100: 8/6/2010 2000: 8/23/2010 2051: 8/10/2010 2500: 8/24/2010 3000: 8/25/2010 3100: 9/8/2010 3300: 9/8/2010 3400: 9/11/2010 3800: 10/4/2010 4000: 10/4/2010 4200: 10/4/2010 5000: 10/13/2010 6000: 10/14/2010 |
|
|
|
|
02-14-2011, 09:27 PM
|
#12 |
 Drives: 2011 Camaro LS Join Date: Sep 2008
Location: NJ
Posts: 1,917
|
Well I had mine done, 35% all around about a month ago. First time they didnt put the tint far enough down the window on driver side that it started peeling up from indexing. Took it back and it was fine. I was on day 5 or so of no problems then one day I go to my car and see marks on the window and it had started peeling again. Turns out my dad for some reason unknown to anyone as to why, rolled down the window when he was moving it to plow during a snow storm. It ruined the tint and I have yet to get it done and its pretty bad now. I was going to wait for warmer days to take it back and get it redone hopefully for the 3rd and final time. I would say wait at least a full week before you begin using your windows. I always like to wait a bit longer then needed just to be sure.
|
|
|
|
|
02-14-2011, 10:24 PM
|
#13 | |
|
2011 Camaro Newbie
Drives: 2011 Camaro 2SS (With RS package) Join Date: Dec 2010
Location: Dallas, Texas
Posts: 120
|
Quote:
|
|
|
|
|
|
02-19-2011, 12:01 PM
|
#14 |
|
2011 Camaro Newbie
Drives: 2011 Camaro 2SS (With RS package) Join Date: Dec 2010
Location: Dallas, Texas
Posts: 120
|
Ok, well it's been a week and the "cloud" is gone...
Thanks for putting up with me 
|
|
|
|
|
|
|
|
 |
| Tags |
| tint |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Detailing questions answered here! | Moose | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 636 | 06-04-2011 12:27 PM |
| PA tint law | nomadicdogg | USA - NY / NJ / PA | 11 | 01-24-2011 08:33 PM |
| Experience with windowtint.com or similar diy tint websites? | scuba264 | Cosmetics and Lighting Modification Discussions | 10 | 01-05-2011 10:48 PM |
| Standard Camaro Window Tint | MightyT | Camaro Price | Ordering | Tracking | Dealers Discussions | 8 | 09-26-2009 07:51 PM |
| ordering questions...how long, when should i order... etc | haleyd | Camaro Price | Ordering | Tracking | Dealers Discussions | 10 | 07-25-2009 01:47 PM |
