11-30-2017, 10:39 PM | #1 |
Drives: 2012 2SS L99 Join Date: Nov 2017
Location: Baytown, TX
Posts: 3
|
L99 looking for a good shop in Houston
Looking at doing stall, 3.91, and headers myself, but need to lock down a shop in Houston area for cam install and tune. Also decide on vvt/dod delete cam or full ls3 conversion. It seems everyone is all over the place with this argument. So help a brother out.
__________________
Every part is pretty much a bolt-on. So just bolt-ons here.
|
12-01-2017, 01:16 AM | #2 |
There's always a faster 1
Drives: (-,-) Join Date: Feb 2014
Location: Somewhere out there
Posts: 201
|
Can't go wrong with any of these. They are all awesome folks and are great at what they do.
- J-Rod's Speedshop - MTI (Motorsport Technologies Inc) - KP Racing - PowerFab Automotive Hope this helps.
__________________
Sometimes we forget Have you thanked a soldier lately? |
12-01-2017, 06:44 AM | #3 |
Drives: 2011 camaro ss convertible Join Date: Oct 2015
Location: Houston, tx
Posts: 421
|
Theres also Houston house of power, LMR, and G-force. I dont have any personal experience with any of them but they’re big name shops here in houston with good reputation.
|
12-01-2017, 07:03 PM | #4 |
Drives: 2015 camaro 2ss, 87 monte ss Join Date: Jun 2016
Location: Houston
Posts: 256
|
Had J rods do a little work on my car a few weeks ago and they are good. Just pulling up to the garage lets you know they work on ls based cars. There had to be 7 camaros, 5 vettes and several cts-vs they were working on at the time.
The seemed like a friendly bunch and price was reasonable for the work done. |
12-02-2017, 06:24 AM | #5 |
Drives: 2010 SS Join Date: Oct 2016
Location: CS, TX
Posts: 27
|
I have my 2010 in at Triple Threat Racecraft right now getting a turbo setup. Smaller shop but very knowledgeable and had some very nice Camaro a vette builds going on when I dropped mine off. They are in Porter.
__________________
2010 2SS, Stage 4 BTR Cam, AEM-CAI, Long Tube Headers, Borla Cat Back, Exhaust, In the Shop now for Turbo Build
|
12-02-2017, 09:23 AM | #6 |
Drives: 2012 2SS/RS LS3 Join Date: May 2012
Location: Pearland, TX
Posts: 390
|
J-Rod or GForce have always been good to me. Highly recommend.
__________________
Victory Red 2012 2SS/RS LS3 Camaro
Pat G. Spec Cam from Cam Motion 228/236 .599/.599 112+2LSA Kooks 1-7/8" LTs w/ Cats Roto-Fab, Bo White TB, Borla Touring Catback 3.91 1LE Gears, MGW Tuned by Pat G |
12-03-2017, 06:46 PM | #7 |
Drives: 2012 2SS L99 Join Date: Nov 2017
Location: Baytown, TX
Posts: 3
|
Thank you for the advice. I will check them out.
__________________
Every part is pretty much a bolt-on. So just bolt-ons here.
|
12-04-2017, 12:02 PM | #8 |
Drives: 2010 SS Join Date: Jun 2015
Location: Austin
Posts: 439
|
Chuch at HHP for the win. We grind their cams in house here in Georgetown.
|
|
|