11-17-2018, 01:29 PM | #2311 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
Thank you, much appreciated. Lots of time and money in the car but, worth it...
YOLO so, don't wait ;o) ... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
11-30-2018, 05:36 PM | #2312 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
Enjoying the cheap race gas -$1.63 a gallon for 78%!
Ordered strap points from ZL1 Addons: https://zl1addons.com/products/camar...5-strap-points With the new splitter etc., dyno strapping will be better. Still waiting to hear about the CF wing... hope they do one! -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 12-05-2018 at 10:44 PM. |
11-30-2018, 09:45 PM | #2313 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
While I’m at it, picked up a trailer hitch — for those track days!
https://www.etrailer.com/Trailer-Hit...eid=2011301961 Trailer — that will come later... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 12-05-2018 at 10:48 PM. |
11-30-2018, 10:32 PM | #2314 | |
CamaroFans.com
|
Quote:
|
|
12-03-2018, 07:14 PM | #2315 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
So, bit the bullet...
Bought Pedders coilovers and camber plates on a great deal from CompleteStreet! Camber plates: https://www.cspracing.com/pedders-ad...camaro/581050/ Coilovers: https://www.cspracing.com/pedders-ex...-v6-v8/160086/ With a discount code of Turkey, got a great deal! Will be selling all my 1le struts, shocks, and Moreno camber plates, (new) Pegasus camber plates soon... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 12-10-2018 at 06:59 PM. |
12-05-2018, 09:39 PM | #2316 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
Adding these to the rear inner LCA bushings:
http://juicedmotorsports.com/2010cam...rs_ep7264.html Should take care of the last few items on the suspension... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 12-10-2018 at 07:00 PM. |
12-06-2018, 07:16 PM | #2317 |
ZL1 Pilot
|
Oh cool! more goodie parts. I thought you already had camber plates or something similar.......
__________________
GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs |
12-06-2018, 07:18 PM | #2318 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
I do have 2 sets — keeping all Pedders though with this.
Already sold my 1LE backup struts/shocks before I could post them.. Now to get the camber plates sold - next ;o) -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
12-08-2018, 09:52 PM | #2319 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
Well, Juiced refunded me for the bushings. Looks like they’re not available anymore.
Looking at Detroit speed LCAs now (on sale) as well as their front sway bar links. Already ordered 1LE rear links... Hoping one of the vendors has a deal still... RDP is higher than Detroit Speed, very unusual.. https://rdpstore.com/p-7807-detroit-...15-camaro.aspx https://www.detroitspeed.com/adjusta...-camaro-042304 Gonna ask Steve... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 12-08-2018 at 10:06 PM. |
12-09-2018, 11:02 AM | #2320 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
Steve you’re an honest man. Thank you!
Ordered and saved a bit of changed too... LCAs: Sway Bar links (front): Hard to beat... Rears off of eBay (2) part # :22761221 https://www.ebay.com/itm/NEW-Genuine...53.m2749.l2648 -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 12-10-2018 at 07:01 PM. |
12-09-2018, 12:02 PM | #2321 |
I need to get sways and updated end links as well. Thanks for sharing! I'm assuming the ZL1 end links are just as good as Detroit Speed's.
Edit: the more I look at it, it looks like Detroit Speed's rear sway "update kit" includes GM endlinks (hard to tell). Guessing that's why you got ZL1 endlinks off Ebay and then got the rear sway by itself? Sent from my SM-G965U using Tapatalk
__________________
2010 Camaro 2SS/RS | RotoFab CAI | ARH 1 7/8" LT Headers w/ HFC | SW Retro Exhaust | ZL1 Shifter | Ridetech Coilovers | FE4 conversion | UMI toe rods & trailing arms | Prothane Subframe & UCA bushings | Detroit Speed sways | Forgestar F14 wheels | ZR1 Blue Calipers | Tuned by ADM Performance SSeric's Build Thread Last edited by SSeric; 12-09-2018 at 12:19 PM. |
|
12-09-2018, 01:00 PM | #2322 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
I had the ZL1 links with my jpss swaybar. I'm just replacing them with the new control arms at the same time since I'm in there.
ZL1 links are hard to beat... Fronts, I have the ZL1’s also but, like the adjustment Detroit’s give... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
12-09-2018, 01:17 PM | #2323 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
So Mark (ABADZL1) and I have been texting the last couple of days looking at intake manifold volume and prediction coefficients settings in HP Tuners. Mark turned me onto those settings as it appears many who add superchargers to their non-SC Camaro's need to account for the volume differences. We’re testing those changes — since it has been discussed on HP Tuners. I’m also ported so that was also discussed on HP Tuners.
I’ll post up those once I test out my transition lean spot. -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 12-09-2018 at 10:12 PM. |
12-10-2018, 06:56 PM | #2324 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
So, while I'm going crazy, decided to get the Detroit Speed Motor Mounts:
From DynoSteve: https://www.rdpstore.com/p-7804-detr...15-camaro.aspx With the discount code, best deal out there... Gotta support the vendors ;o) what I’m really aiming for is the adjust-ability of height -- these will allow that. Interested to see how they 'run' on the street... We'll see... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 12-10-2018 at 09:10 PM. |
|
|
Thread Tools | |
|
|