You are browsing camaro5 
 |
|
03-25-2019, 11:43 AM
|
#1 |
 
Drives: 2014 ZL1 Join Date: Jun 2009
Location: Tucson, AZ
Posts: 314
|
Nitrous For Cooling?
So I have a bunch of spare nitrous parts lying around (bottle, feed line, solenoid etc.) and I am thinking of getting an intercooler spray bar for the stock heat exchanger. I know turbo guys use them routinely (some even use the Cry02 systems).
Do guys use these systems on the ZL1s to lower the IATs with good results as well? I want to do an occasional track day at the drag strip with bolt-ons so I am not looking to spend the money and effort on a full HX system. |
|
|
|
03-25-2019, 12:41 PM
|
#2 |
    Drives: 2013 ZL1 and 2019 Ram Laramie Join Date: May 2017
Location: Milwaukee
Posts: 1,259
|
A lot of guys have run a 150 shot safely (occasionally) on the LSA with fuel and cam upgrades.
|
|
|
|
|
03-25-2019, 03:03 PM
|
#3 |
|
Drives: 2014 ZL1 Join Date: Jun 2009
Location: Tucson, AZ
Posts: 314
|
Im not talking about spraying for power. I wanna spray the heat exchanger to keep the IAT down.
|
|
|
|
|
03-25-2019, 03:17 PM
|
#4 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,693
|
Meth may be better, that is what I did on my LSA...
 Running boost juice or, can run washer fluid — if it’s methanol (-20 blue color no additives) -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
|
|
|
 |
|
|
