anvil notch spoiler not fitting

[c5dreamer]

Hi, just received my spoiler from anvil and I'm having issues putting it on, I can put 4 of the bolts of the spoiler on the trunk but the last 2 are off about the width of a bolt. For those you who installed did your just go on easily? any suggestions? thx!

[CPCNY]

Try putting the last two in first. Mine had one fastener on the passenger side end that was slanted and that's what I did.

Another option is to remove those two fasteners and try to install them after the spoiler is in place.

[c5dreamer]

Originally Posted by CPCNY

Try putting the last two in first. Mine had one fastener on the passenger side end that was slanted and that's what I did.

Another option is to remove those two fasteners and try to install them after the spoiler is in place.

Thx, I just said screw it and dremeled about an 1/8 of an inch on 2 of the holes, still had to force it but got it on.

[CPCNY]

Originally Posted by c5dreamer

Thx, I just said screw it and dremeled about an 1/8 of an inch on 2 of the holes, still had to force it but got it on.

Nice!. Pics of the final installed result please.