06-17-2015, 07:54 AM | #1 |
Account Suspended
Drives: 12 Black Camaro LS M6 Join Date: Jul 2012
Location: Charlotte NC
Posts: 336
|
CEL caused by k&n intake
i have a k&n after market cold air intake. I keep getting the CEL coming off and on here and there. But now has just styaed one. I had the local store read the code and its due to the intake sucking in too much air so its throwing the sensor off. If this ok for me to keep on driving with or should i buy that replacment sesnor that you can get at the GM store online to solve the CEL.. im assuming its messing with my fuel to air ratio...any suggestions..
|
06-17-2015, 08:00 AM | #2 |
Moderator
|
A new sensor won't likely help. You're better off with a tune.
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
06-17-2015, 08:04 AM | #3 |
The BBOMG fill-in husband
Drives: 2015 2SS/RS 1LE AKA V1LE Join Date: Aug 2010
Location: Elmira, NY
Posts: 4,465
|
I would get a hold of K&N, they aren't supposed to throw codes, that's why I bought mine, never got a cel on my 6
__________________
UPSTATE C5 MEMBER
|
06-17-2015, 08:07 AM | #4 |
what's the code?
|
|
06-17-2015, 08:26 AM | #5 |
Account Suspended
Drives: TAMPA TUNING FACEBOOK & INSTAGRAM Join Date: Oct 2010
Location: Tampa, Fl
Posts: 3,044
|
Most likely an unmeasured air leak from the install. Just double check your install and make sure everything is snug down good
|
06-17-2015, 09:33 AM | #6 |
Account Suspended
Drives: 12 Black Camaro LS M6 Join Date: Jul 2012
Location: Charlotte NC
Posts: 336
|
will do. thanks for the suggestions guys..
|
06-17-2015, 12:51 PM | #7 |
Drives: v6 6speed 2012 Join Date: Jun 2015
Location: east 10
Posts: 15
|
the other kits look more enclosed at the filter end. maybe a ram air effect is causing turbulence at the maf. other kits look dif. the kn has that 10deg elbow before the maf. other kits look straighter. i would put an extra piece of tubing inside the filter making the overall length longer or extending the filter farther. maybe put a piece of sheet metal bent around the forward side of the filter shielding it from a ram effect if its happening. testing dif stuff is kinda fun.
|
06-17-2015, 04:11 PM | #8 |
|
either a leak like stated above or the MAF is dirty.
|
06-17-2015, 06:08 PM | #9 |
ultracrepidarianism
Drives: '14 1SS/RS/1LE/NPP '18 Accord Sport Join Date: Mar 2014
Location: where folks drive like shit
Posts: 1,297
|
if all else fails unhook the battery overnight
__________________
|
06-17-2015, 06:39 PM | #10 |
|
|
06-17-2015, 06:48 PM | #11 |
X2, I'm thinking the battery needs to be unhooked..I did this before I installed my cold air intake(BBK)...I had a buddy who installed the k&n brand without unhooking the battery and got the CEL but later went away.. Sent from my iPhone using Tapatalk |
|
06-17-2015, 06:51 PM | #12 |
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
I say get a new maf and/or reinstall everything and see if anything wasn't tightened correctly. You don't need a tune just for the k&n air intake, believe me when I installed mine about 4 years ago, I also installed a jet chip maf as well and no problems. But a tune will help make everything work together better, but if I were you I would hold off on a tune till you get some headers.
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez |
06-17-2015, 07:27 PM | #13 |
Account Suspended
Drives: 12 Black Camaro LS M6 Join Date: Jul 2012
Location: Charlotte NC
Posts: 336
|
ok i opened the hood and saw something that i think is causing this CEL.. the small tube that runs from the pipe of the intake to the back of the engine seems to have come loose.. so I'm thinking thats why the CEL had not gone away..before it would come on and go off which i was fine with..but this time it didn't go away.. I'm thinking it was due to this small skinny pipe that had come off.. will drive the car more tomorrow and see if it comes off.. either way i can order the new sensor because i know this was a known issue so that why they made this aftermarket sensor for the issue of the CEL..
|
06-17-2015, 07:38 PM | #14 |
Drives: 2014 Yellow L99 Join Date: Jan 2013
Location: nowhere
Posts: 545
|
when i had a v6, first thing i did before installing my k&n intake was disconnect the battery. never had a CEL.
|
|
|
|
|