10-13-2010, 10:27 PM | #29 |
Born: August 27, 2009
Drives: 10CAMARO SS,12CRUZE RS,07 YAM R6 Join Date: Aug 2009
Location: Waterloo, Ontario, Canada
Posts: 866
|
Pm price for L99.thanks
__________________
Victory Red 2SS/RS
Vin# A9130145 |
10-14-2010, 11:30 AM | #30 |
Drives: Red Jewel SS RS 625 RWHP Join Date: Sep 2009
Location: Hugo, MN
Posts: 18
|
My car will be on the dyno this afternoon if anyone is interested in watching you can go to hitechmotorsport.com and click on the live video on the left side of the home page. I think it will be about 3:00 MN time. My plugs and o2 sensors were gummed up from an additive in the Sunoco 260 (104 octane) fuel I was mixing with pump gas. dmax86 if your talking about mine...that's what I was told the calculations were for 625RWHP, if that is incorrect I would like to know. I'm hoping after the repairs are made it will run 625RWHP again today. I will attach my dyno sheet on here one of these days.
|
10-14-2010, 11:57 AM | #31 | |
Drives: 2009 Corvette Z06 Join Date: Aug 2009
Location: Marietta, GA
Posts: 2,141
|
Quote:
-Matt |
|
10-14-2010, 12:05 PM | #32 |
Drives: Red Jewel SS RS 625 RWHP Join Date: Sep 2009
Location: Hugo, MN
Posts: 18
|
|
10-14-2010, 08:38 PM | #33 |
Drives: Red Jewel SS RS 625 RWHP Join Date: Sep 2009
Location: Hugo, MN
Posts: 18
|
Well it sounds like they ran out of time to get it on the dyno today, they tell me it will be on around 9:00 MN time Friday.
|
10-15-2010, 09:35 AM | #34 |
Drives: Red Jewel SS RS 625 RWHP Join Date: Sep 2009
Location: Hugo, MN
Posts: 18
|
Ok they have my car on the dyno now. It's 9:30 am MN time. Go to hitechmotorsport.com and click on the live dyno video on the left side of the home page, it may take a couple minutes to load.
|
10-15-2010, 02:11 PM | #35 |
Drives: Red Jewel SS RS 625 RWHP Join Date: Sep 2009
Location: Hugo, MN
Posts: 18
|
Well they found out the lid on the Edelbrock Supercharger is cracked and broken around the bolts that hold it down. It sounds like with the 2.75" pulley it built up so much pressure that forced the lid to push up and brake around the bolts. For now Hitech is going to put bigger washers on the bolts holding down the new lid. The lid will be delivered overnight early Saturday morning and should be on the car by noon hopefully running on the dyno again. With the broken cover it was only putting out 405rwhp.
|
10-19-2010, 09:04 AM | #36 | |
Drives: 2009 Corvette Z06 Join Date: Aug 2009
Location: Marietta, GA
Posts: 2,141
|
Quote:
Thanks, Matt |
|
10-25-2010, 11:28 AM | #37 |
PM for price shipped to 20723 - LS3 M6 and tax please
|
|
10-29-2010, 10:40 PM | #38 |
Cantafordit
Drives: 2010 2SS/RS Join Date: Mar 2010
Location: Picayune, MS/Covington, LA
Posts: 282
|
PM price LS3 to 70433
__________________
Down, But Not Out 610.7 RWHP/553.8 RWTQ
|
11-02-2010, 10:13 AM | #39 |
Drives: Red Jewel SS RS 625 RWHP Join Date: Sep 2009
Location: Hugo, MN
Posts: 18
|
Yes they did respond with overnight delivery. The new cover had to be milled to fit washers on the bolts holding it down. All good now.
|
11-02-2010, 08:34 PM | #40 |
Drives: 2SS Join Date: May 2009
Location: Fort Collins
Posts: 611
|
Is that your A/F ratio during dyno?
__________________
2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687
|
11-02-2010, 10:46 PM | #41 |
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry Join Date: Aug 2009
Location: Denver
Posts: 2,126
|
At that AFR your almost sure to blow the engine anytime. Lean = high power at cost of new engine. Should be closer to 11.5 on WOT. Maybe this has something to do with the cracked cover?
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit LPE Brotherhood . Last edited by Blue70SS; 11-02-2010 at 10:59 PM. |
11-02-2010, 10:51 PM | #42 |
Drives: 2SS Join Date: May 2009
Location: Fort Collins
Posts: 611
|
+1
__________________
2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Supercharger / Turbocharger Results (INFO) Thread | radz28 | Forced Induction - V8 | 273 | 08-15-2023 04:44 PM |
Edelbrock E Force Supercharger Issue | PJ droopy pants | Forced Induction - V8 | 27 | 01-10-2011 08:21 AM |
Edelbrock E Force Supercharger with Free Shipping | Jason@Phastek | Forced Induction | 7 | 12-25-2010 09:29 PM |
Edelbrock E Force Supercharger Installed and Tuned! | PJ droopy pants | Forced Induction - V8 | 61 | 07-16-2010 12:48 PM |
Edelbrock E Force Supercharger Installed | GPC1 | Forced Induction - V8 | 15 | 05-03-2010 09:21 AM |