09-05-2020, 11:24 PM | #1 |
Drives: Camaro Join Date: Oct 2015
Location: Portland
Posts: 208
|
Z28 Suspension, ZL1 Brakes, Pegusus cradle bushings
Selling the SS after 5 great years! Couple of parts I never installed.
Take off Z28 suspension kit. Car was bought then converted to drag track duties. This is the springs and shocks mounted together for easy install, sway bars and some smaller parts ill get pics up for soon. $1250 plus shipping. ZL1 Brakes. They were painted with hitemp paint by high end shop (gun) IOM. Rotors are used but turned fresh lots of meat on them. Pads i have front set of hawl ceremics i believe i have rears too. And stainless lines nib. $800 plus shipping. Pegasus cradle bushings NIB. $295 plus shipping. Bmr cross member NIB. 40 plus shipping. Should have pics up this weekend!
__________________
2011 IOM RS/2SS. Manual, Eforce, Fuel mods, 3.25 pulley, Stainless Power headers, Borla exhaust, MGW shifter, Z28 suspension with stock front sway, ZL1 Brakes, ZL1 body kit and hood, rotofab
|
09-06-2020, 03:35 AM | #2 |
Drives: 2012 Camaro SS A6 SIM Join Date: Nov 2016
Location: Banning
Posts: 47
|
You have a pm.
|
09-06-2020, 03:49 AM | #3 |
|
What color is tunnel brace? Interested in that and Pegasus bushings
Sent from my iPhone using Tapatalk
__________________
Cold Air Inductions CAI Stainless Power LT's with HFC's Flowmaster American Thunder Cat Back APEX Scoop and WW Relocation Kit VMAX Ported Throttle Body Custom Dyno Tune Pfadt 1.25" Lowering Springs ZL1 Rims on 275 front 315 Rear custome underlay vinyl wrap Anvil Spoiler heritage grill APR Front Splitter Custom Emblempros emblems ZL1 Side Skirts 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)
|
09-06-2020, 10:29 AM | #4 |
Drives: Camaro Join Date: Oct 2015
Location: Portland
Posts: 208
|
Brace is black!
__________________
2011 IOM RS/2SS. Manual, Eforce, Fuel mods, 3.25 pulley, Stainless Power headers, Borla exhaust, MGW shifter, Z28 suspension with stock front sway, ZL1 Brakes, ZL1 body kit and hood, rotofab
|
09-06-2020, 10:43 AM | #5 |
Drives: Camaro Join Date: Oct 2015
Location: Portland
Posts: 208
|
Pics of brace in box and out its actually called Hammertone I believe its a textured dark grey powered coat simple but hefty piece!
__________________
2011 IOM RS/2SS. Manual, Eforce, Fuel mods, 3.25 pulley, Stainless Power headers, Borla exhaust, MGW shifter, Z28 suspension with stock front sway, ZL1 Brakes, ZL1 body kit and hood, rotofab
Last edited by 93TAWicked1; 09-06-2020 at 10:43 AM. Reason: spelling |
09-06-2020, 11:38 AM | #6 |
Drives: Camaro Join Date: Oct 2015
Location: Portland
Posts: 208
|
Cradle bushings in box and open. The packing is awesome on these things!
__________________
2011 IOM RS/2SS. Manual, Eforce, Fuel mods, 3.25 pulley, Stainless Power headers, Borla exhaust, MGW shifter, Z28 suspension with stock front sway, ZL1 Brakes, ZL1 body kit and hood, rotofab
|
09-06-2020, 11:52 AM | #7 |
Drives: Camaro Join Date: Oct 2015
Location: Portland
Posts: 208
|
Brakes. Again painted with hi temp paint..well paint they assured me holds up well. They look great for driver add brembo sticker which is what i was going to do or have the. Powder coated. Massive! Heres is the calipers and pads. The rotors look like used rotors recently turned. This is just front rear rotors are same as SS I believe.
__________________
2011 IOM RS/2SS. Manual, Eforce, Fuel mods, 3.25 pulley, Stainless Power headers, Borla exhaust, MGW shifter, Z28 suspension with stock front sway, ZL1 Brakes, ZL1 body kit and hood, rotofab
|
09-06-2020, 12:32 PM | #8 |
Drives: Camaro Join Date: Oct 2015
Location: Portland
Posts: 208
|
Suspension stuff... I would rather not unwrap the swaps. And need to get shock/coil assemblies out of storage for pics. Well try today. Here are pics of sways,end link in box and trailing arms.
__________________
2011 IOM RS/2SS. Manual, Eforce, Fuel mods, 3.25 pulley, Stainless Power headers, Borla exhaust, MGW shifter, Z28 suspension with stock front sway, ZL1 Brakes, ZL1 body kit and hood, rotofab
|
09-06-2020, 03:14 PM | #9 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Do you have rear calipers?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
09-06-2020, 03:46 PM | #10 |
Drives: 2014 SS 2010 SS 93 Camaro z28 Join Date: Apr 2017
Location: Ohio
Posts: 254
|
I’ll take the bushings if you’ll do 300.oo shipped send me you pay pal info thanks Tommy
|
09-06-2020, 07:09 PM | #11 |
Drives: 2014 SS 2010 SS 93 Camaro z28 Join Date: Apr 2017
Location: Ohio
Posts: 254
|
Don’t need that fancy box wrap them up throw them in a 7.50 flat rate box lol thanks Tommy
|
09-06-2020, 07:12 PM | #12 |
Drives: Camaro Join Date: Oct 2015
Location: Portland
Posts: 208
|
The purchaser of the car got emailed me this morning and would like the brakes and the bushings. There was another person that asked for paypal that would be next up...although he may not be too happy with me..timing can be hard with selling stuff online :(
Z28 suspension has a pending sale. Cross brace still available. Bobby
__________________
2011 IOM RS/2SS. Manual, Eforce, Fuel mods, 3.25 pulley, Stainless Power headers, Borla exhaust, MGW shifter, Z28 suspension with stock front sway, ZL1 Brakes, ZL1 body kit and hood, rotofab
|
09-06-2020, 09:46 PM | #13 |
Drives: 2014 SS 2010 SS 93 Camaro z28 Join Date: Apr 2017
Location: Ohio
Posts: 254
|
I’ll pass seems like drama I don’t need to save 80 bucks GLWS or screwing someone over
|
09-11-2020, 08:16 AM | #14 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
What’s left?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|