2010 Chevy Camaro prototype spyshot -- without camo!! - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*DGthe3* · 12-12-2007, 07:12 PM

Oh, and now I noticed the detail in the driving shot. The lines are still there, its just the paint and angle on this one

balonywolf · 12-12-2007, 07:18 PM

Well, I've decided I'm definitely not getting the car in white.

*Mr. Wyndham* · 12-12-2007, 07:22 PM

Whaaaooo!!!! I'm gone for 3 hours, and this shows up! hahahaha!

Everything looks great! Reverse Mohawk? Check.
Rear haunches? Double Check
Awesome door handle? Awesome grille? Cowl Hood?
Check, check, and check!!!

Bad angle? check.

Also, the previous prototypes didn't show it off as much, but they seemes to have changed the repeater lamps on the sides, they're taller, and shorter than the concepts. Remember GM saying that they'd have to meddle with things like that to conform to federal standards?

Still look good to me

Fantastic Work, GM!!!

Quote:

Originally Posted by Brangeta

My only criticism is that the side appears very flat and boring. Perhaps it is only because it is painted white? I'm sure a metallic color would add depth.

Welcome, Brangeta! Yes...I'm attributing the 'flat' look to the white paint.

Quote:

Originally Posted by DGthe3

the sides don't seem to have the same deep-cut angular thing at the bottom of the door/rear panel. There is still a bit of a line there but not much. Same with the body line that runs along the middle of the door between the fenders

They're there

:eek:Ugh....can anybody else see the (gulp) gas-cap, like....I can?

Jay · 12-12-2007, 07:27 PM

lookin good so far.

camaro10 · 12-12-2007, 07:33 PM

Quote:

Originally Posted by balonywolf

Well, I've decided I'm definitely not getting the car in white.

YOU GOT THAT RIGHT!!!
Ban white! Ban White!! BAN WHITE!!!

Esyrider · 12-12-2007, 07:34 PM

Is the vent at the front of the hood cowl suposed to be functional? Mabye somebody else can see it but i cant see mesh there in the front like there is covering all the other openings. But overall, thie pic showed me again how much i hate white cars, and that even in white this is a sexy car.

camaro10 · 12-12-2007, 07:36 PM

Quote:

Originally Posted by Dragoneye

[I]

:eek:Ugh....can anybody else see the (gulp) gas-cap, like....I can?

I'm thinkin so!

But we all really knew it would be there. It would be nice if we could have SOMETHING original on the car! (Other than the car itself of course. Sorry I said anything GM just get it out already!!)

balonywolf · 12-12-2007, 07:39 PM

Well, looking at the dashboard, I see two promising, squared-off humps in front of the steering wheel.

SulphurDave · 12-12-2007, 07:56 PM

Quote:

Originally Posted by Dragoneye

Whaaaooo!!!! I'm gone for 3 hours, and this shows up! hahahaha!

exactly my thoughts

Itim06 · 12-12-2007, 07:58 PM

DADDY LIKE!!! I can't wait to buy mine, and put some after market riims on it!

*Mindz* · 12-12-2007, 08:01 PM

The rims on that thing look similar to the concept but they don't have the same appeal to me. I'm about ready to start looking for aftermarkets to put on as soon as I buy it now. The angle isn't there they look like rounded spokes. If they're round, I'd rather have the curve inverted to it doesn't go towards the outside of the wheel and up, I'd rather it curve up and then outside to the edge of the wheel.

SoFlaZ · 12-12-2007, 08:05 PM

Its been 3 hours!!!?!?!, ask and I shall recieve!!!!!

Scotsman · 12-12-2007, 08:10 PM

First, I'd advise everyone to SAVE THIS PICTURE TO THEIR COMPUTER, as there is a very high probability this photo will be removed from many a website incluing here.

WOW, GM has done a fantastic job yet again with another concept-to-production vehicle. Everything about this car is PERFECT, not a single blemish I can see. The roofline looks higher as well and now I feel as if there's not much to worry about as far as headroom is concerned. The wheels are spot on in size and COLOR, lets hope that these are indeed production style wheels because they will most definitely be going on my Camaro. And the shark fin antennae looks awesome!!!

*TAG UR IT* · 12-12-2007, 08:12 PM

Someone has to do a chop w/ some seriously wide meats in the rear quarters. This thing is going to look simply deadly w/ some wide tires.

12-12-2007, 07:12 PM	#29
DGthe3 Moderator.ca Drives: 05 Grand Am GT Join Date: Jul 2007 Location: Niagara, Canada Posts: 25,372	Oh, and now I noticed the detail in the driving shot. The lines are still there, its just the paint and angle on this one __________________ Note, if I've gotten any facts wrong in the above, just ignore any points I made with them __________________ Originally Posted by FbodFather My sister's dentist's brother's cousin's housekeeper's dog-breeder's nephew sells coffee filters to the company that provides coffee to General Motors...... ........and HE WOULD KNOW!!!! __________________ Camaro Fest sub-forum

12-12-2007, 07:27 PM	#32
Jay Drives: Audi A4 Join Date: Oct 2007 Location: Van City, Canada Posts: 429	lookin good so far. __________________ "HEAVEN JUST COULDN'T HANDLE ALL THE NOISE" JAY

12-12-2007, 08:01 PM	#39
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 18,421	The rims on that thing look similar to the concept but they don't have the same appeal to me. I'm about ready to start looking for aftermarkets to put on as soon as I buy it now. The angle isn't there they look like rounded spokes. If they're round, I'd rather have the curve inverted to it doesn't go towards the outside of the wheel and up, I'd rather it curve up and then outside to the edge of the wheel. __________________ Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1

12-12-2007, 08:10 PM	#41
Scotsman Auto Pilot Drives: Gunmetal Join Date: Feb 2007 Location: L.A. Posts: 1,307	First, I'd advise everyone to SAVE THIS PICTURE TO THEIR COMPUTER, as there is a very high probability this photo will be removed from many a website incluing here. WOW, GM has done a fantastic job yet again with another concept-to-production vehicle. Everything about this car is PERFECT, not a single blemish I can see. The roofline looks higher as well and now I feel as if there's not much to worry about as far as headroom is concerned. The wheels are spot on in size and COLOR, lets hope that these are indeed production style wheels because they will most definitely be going on my Camaro. And the shark fin antennae looks awesome!!! __________________ "Let the rest of the world dream of Ferraris, Lamborghinis and dinky little British two-seaters. In this country speed doesn't look like that." Got SS?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
Camaro (concept) Press Release!!	Pencil.Fight	5th Gen Camaro SS LS LT General Discussions	4	07-21-2008 03:33 PM
5th Gen Camaro LS3 info from Chevy Hi-Po...READ	TAG UR IT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	295	03-07-2008 10:06 AM

12-12-2007, 07:18 PM	#30
balonywolf Drives: 1996 Jeep Cherokee Join Date: Sep 2007 Location: Raleigh, NC Posts: 369	Well, I've decided I'm definitely not getting the car in white.

12-12-2007, 07:34 PM	#34
Esyrider Preordered Black 09Camaro Drives: 2000 Ford Contour SVT Join Date: Nov 2007 Location: Baghdad, Iraq Posts: 4	Is the vent at the front of the hood cowl suposed to be functional? Mabye somebody else can see it but i cant see mesh there in the front like there is covering all the other openings. But overall, thie pic showed me again how much i hate white cars, and that even in white this is a sexy car.

12-12-2007, 07:39 PM	#36
balonywolf Drives: 1996 Jeep Cherokee Join Date: Sep 2007 Location: Raleigh, NC Posts: 369	Well, looking at the dashboard, I see two promising, squared-off humps in front of the steering wheel.

12-12-2007, 07:58 PM	#38
Itim06 I got a new car come '09 Drives: Infinti G35 Join Date: Sep 2007 Location: Minnesota Posts: 2	DADDY LIKE!!! I can't wait to buy mine, and put some after market riims on it!

12-12-2007, 08:05 PM	#40
SoFlaZ Drives: 2013 SS LS3 Join Date: Feb 2007 Location: WPB FL Posts: 947 View My Garage	Its been 3 hours!!!?!?!, ask and I shall recieve!!!!!

12-12-2007, 08:12 PM	#42
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	Someone has to do a chop w/ some seriously wide meats in the rear quarters. This thing is going to look simply deadly w/ some wide tires.