Colorado members check in here - Page 381 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

LRod · 05-06-2011, 05:50 AM

Quote:

Originally Posted by tom692010

Too bad it was a good show. I saw them way back when at Madison Square Garden. I heard they were going to do a new cd but when they tour they are only doing old stuff cause that's what people want. My brother and I used to dress up,make up and all with card board boxes for amps and play for hours to Kiss Alive.

Good stuff. The Garden had to be a nice show! The first time I saw them was during the Dynasty Tour here in Denver at the The Big Mac (McNichols Arena). Then again in Indy for the Asylum tour, and then Virginia for Animalize Tour. After that I was overseas alot for the Military, so missed out on alot. Nice to meet another KISS fan

Icntdrv55 · 05-06-2011, 03:07 PM

Quote:

Originally Posted by LRod

Good stuff. The Garden had to be a nice show! The first time I saw them was during the Dynasty Tour here in Denver at the The Big Mac (McNichols Arena). Then again in Indy for the Asylum tour, and then Virginia for Animalize Tour. After that I was overseas alot for the Military, so missed out on alot. Nice to meet another KISS fan

Man I LOVE your sig ! That is awesome ! Did you ever get your engine cover done with KISS pic? I am keeping an eye on their tour to see if they are coming this way ! I see they are in Sacramento end of May. I could talk Julie into that one !!
See you soon!

@Tom. Maybe you should try on your old KISS costume......I bet you were Peter Cris or Ace !!

tom692010 · 05-06-2011, 05:07 PM

Yes Ace, never could be girlie enough to be Paul!

mtcwby · 05-06-2011, 06:54 PM

I thought this was a Camaro forum...not a Kiss groupie forum. What, you guys can't get enough of Gene Simmons' tongue??? You sound like my little sister did 30 years ago.

mtcwby · 05-06-2011, 06:58 PM

Quote:

Originally Posted by Commit and Conquer

We are having a difficult enough time getting parts!!! I don't need you guys stripping my car:(

Wish I would have known there was a party going on tomorrow! I would have taken the day off and joined in on the the fun!

Bad news, Joe. It's gonna be another month or so to get your build done, after Larry and I got done pilfering parts off your car when Clint wasn't looking. There's not much left!!!

Clint@A.I.R. · 05-06-2011, 07:25 PM

^^^ lol. Oh I was lookin !!! Gotta Watch you guys......

tom692010 · 05-06-2011, 07:28 PM

Quote:

Originally Posted by mtcwby

I thought this was a Camaro forum...not a Kiss groupie forum. What, you guys can't get enough of Gene Simmons' tongue??? You sound like my little sister did 30 years ago.

Did you ever hear the saying-Absence makes the heart grow fonder?

It doesn't apply in your case!

LRod · 05-06-2011, 09:33 PM

Quote:

Originally Posted by Icntdrv55

Man I LOVE your sig ! That is awesome ! Did you ever get your engine cover done with KISS pic? I am keeping an eye on their tour to see if they are coming this way ! I see they are in Sacramento end of May. I could talk Julie into that one !!
See you soon!

@Tom. Maybe you should try on your old KISS costume......I bet you were Peter Cris or Ace !!

Not yet.....I've been querying a couple of sign shops that will be able to wrap in vinyl. I need to find a good looking quality picture that somehow goes with the VICTORY RED color (don't hate on the color). I have an extra engine cover, so not a great loss. If anyone knows of a good quality sign shop, that does vinyl wrap let me know.

WYcamaro · 05-06-2011, 09:37 PM

Quote:

Originally Posted by LRod

I need to find a good looking quality picture that somehow goes with the VICTORY RED color (don't hate on the color).

The only thing that's worse than the red is if you were driving an automat....ahh crap....

Dieseldummy · 05-06-2011, 10:38 PM

Hey is anyone going to C&C tomorrow? Has the one at southlands been changed?
Where is the new one?
I know full of questions and no answers.
Thanks guys

Commit and Conquer · 05-06-2011, 11:00 PM

Quote:

Originally Posted by mtcwby

Bad news, Joe. It's gonna be another month or so to get your build done, after Larry and I got done pilfering parts off your car when Clint wasn't looking. There's not much left!!!

You guys are killing me! I bet Clint was watching though...not sure he could take another month of me bugging him!

tom692010 · 05-06-2011, 11:33 PM

Quote:

Originally Posted by WYcamaro

The only thing that's worse than the red is if you were driving an automat....ahh crap....

At least he doesn't have that Rappin ground effects kit.

Scourage · 05-07-2011, 03:58 AM

Quote:

Originally Posted by Commit and Conquer

You guys are killing me! I bet Clint was watching though...not sure he could take another month of me bugging him!

If you get tired of bugging him, I'll take over

2010 SS RS · 05-07-2011, 08:39 AM

Fun time last night. I went out in the first round due to a red light.. But Pepper went into the 4th round with some awesome runs.

Ok the bmr trailing arms and toe links make a huge difference. Got my 60 ft times down to a 2.113 but they stopped the wheel hop issue and now it will just be a matter of learning the clutch and what rpm to launch at. Harry took everything I threw at him so I will just need to keep increasing my rpm's at launch until I find the magic number.

12.239 at 119 with a 8344 5:53 PM, DA I will take it: Er Don....I know you are still faster but considering the shitty launch here are the adjusted times

Correct your ET and MPH using the DA (Beta Testing)

Density Altitude:
feet above sea level

1/4 mile ET:
seconds

1/4 mile trap speed:
MPH

Stock and Mildly Modified Naturally Aspirated Engines
10.948 @ 132.437 MPH

Extensively Modified Naturally Aspirated Engines
11.211 @ 129.161 MPH

Extensively Modified Supercharged and Turbocharged Engines
11.674 @ 124.505 MPH

05-06-2011, 06:54 PM	#5324
mtcwby High on "The Camaro Life" Drives: 2010 2SS, IOM, LS3, Vortech, LG cam Join Date: May 2009 Location: Big Sandy, MT & Yuma, AZ Posts: 1,028 View My Garage	I thought this was a Camaro forum...not a Kiss groupie forum. What, you guys can't get enough of Gene Simmons' tongue??? You sound like my little sister did 30 years ago. __________________ "The democracy will cease to exist when you take away from those who are willing to work and give to those who are not."-Thomas Jefferson------Going Strong at 39,250 miles

05-06-2011, 10:38 PM	#5330
Dieseldummy Drives: 2011 2SS Imperial Blue Join Date: Aug 2010 Location: Aurora, CO Posts: 77	Hey is anyone going to C&C tomorrow? Has the one at southlands been changed? Where is the new one? I know full of questions and no answers. Thanks guys __________________

05-07-2011, 08:39 AM	#5334
2010 SS RS Drives: 2010 2SS/RS IBM Black Polished Join Date: Feb 2009 Location: Colorado Posts: 2,108	Fun time last night. I went out in the first round due to a red light.. But Pepper went into the 4th round with some awesome runs. Ok the bmr trailing arms and toe links make a huge difference. Got my 60 ft times down to a 2.113 but they stopped the wheel hop issue and now it will just be a matter of learning the clutch and what rpm to launch at. Harry took everything I threw at him so I will just need to keep increasing my rpm's at launch until I find the magic number. 12.239 at 119 with a 8344 5:53 PM, DA I will take it: Er Don....I know you are still faster but considering the shitty launch here are the adjusted times Correct your ET and MPH using the DA (Beta Testing) Density Altitude: feet above sea level 1/4 mile ET: seconds 1/4 mile trap speed: MPH Stock and Mildly Modified Naturally Aspirated Engines 10.948 @ 132.437 MPH Extensively Modified Naturally Aspirated Engines 11.211 @ 129.161 MPH Extensively Modified Supercharged and Turbocharged Engines 11.674 @ 124.505 MPH __________________ 418 Stroker, 621RWHP 648 lbs TORQUE Built by Laramie GM Auto Center Tuned by Nick at Mac Autosport. EForce SC, 2 3/4pulley,LPE dual fuel pump, JRE Twin fuel rail upgrade, posi clutch kit, RX oilcatch can and breather, Callies Compstar crankshaft and rods, Racing bearings, CP -13.8 race pistons, steel rings, Comp Cams X6 blower cam, Springs, HD timing chain and tensioner, Doug Thorley Tri Y LT headers, 89.7lb injectors, RPM rollbar, DSS1400 shafts, Simpson 5 pt harness, BMR Toe rods and trailing arms, led lights, RPM input and output shafts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Old school members!	4thGenRocks	Off-topic Discussions	14	07-06-2010 04:00 PM
For Sale: 2007 Chev Colorado EXT Cab Z71 4X4	bluch	Autos For Sale / Wanted	7	06-25-2009 02:03 PM
Check out this web site i found	ezlock83	5th Gen Camaro SS LS LT General Discussions	5	03-04-2009 12:44 PM
Voice Your Comments/Suggestions/Input for Focus Group on 2010 Camaro	Mr. Wyndham	5th Gen Camaro SS LS LT General Discussions	236	04-22-2008 12:43 AM
# Of Members	TAG UR IT	Site Related Announcements / Suggestions / Feedback / Questions	25	03-16-2008 11:47 AM

05-06-2011, 05:07 PM	#5323
tom692010 Account Suspended Drives: 4 wheels Join Date: Mar 2009 Location: Here Posts: 1,404	Yes Ace, never could be girlie enough to be Paul!

05-06-2011, 07:25 PM	#5326
Clint@A.I.R. Account Suspended Drives: 99' Camaro 404 TT Join Date: Sep 2010 Location: Wheat Ridge Posts: 324	^^^ lol. Oh I was lookin !!! Gotta Watch you guys......