Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
TireRack
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Vendor and Seller review / feedback / experiences


Reply
 
Thread Tools
Old 04-11-2014, 07:02 PM   #1
tomster
RedLine
 
tomster's Avatar
 
Drives: 2018 "hyper blue" ZL1 1LE
Join Date: Dec 2012
Location: St Louis area
Posts: 640
Ted Jannetty JRE = GREAT Service

Ted has another satisfied customer!
I had previously installed headers and rotofab, but never had a tune done. I decided it was about time to tune so I contacted Ted and at the same time, I was able to package the sct tuner, pulley, belt, crank bolt, and teds tune for a good price (75hp tune package)

To me that is a simple transaction that any performance parts place can do well. Where Teds service go's beyond average is in his tuning process.

After getting the needed Information from me Ted emailed me the first (initial) tune. While i'm not as good as Ted I can make since of the date logs and in all honesty his first stab at my tune was really pretty perfect and looked safe! I sent him my data logs back with a little note asking if we could see if we can get alittle more.

The same day Ted gave me a phone call and went over a few of the numbers. He sent me a more aggressive tune based on what I was asking for. Again I data Logged and sent them back to him. He then made a small revision and sent it back. I can say it is perfect and exactly what I was looking for.

The part that in my mind takes JRE from good to Great is the time he took to find out what "I" was asking for and make adjustments and do what he could to get the most from my tune. He was very quick to respond back every time I sent him logs or asked a question and he really made what could have been a complicated process simple. Not to mention how close that first tune was!

Pretty amazing!
__________________
2018 ZL1 1LE (daily driver on the nice days)
tomster is offline   Reply With Quote
Old 04-11-2014, 11:33 PM   #2
bumblebeecamaro
Car Lover By Nature
 
Drives: Mini Cooper S
Join Date: Dec 2009
Location: Central FL
Posts: 2,300
Ted tuned my '10 Bumblebee-Maggie SS and my '13 ZL1 and they both ran perfectly.
__________________
bumblebeecamaro is offline   Reply With Quote
Old 04-12-2014, 06:38 PM   #3
tomster
RedLine
 
tomster's Avatar
 
Drives: 2018 "hyper blue" ZL1 1LE
Join Date: Dec 2012
Location: St Louis area
Posts: 640
I just put it on the dyno with a wideban O2 its crazy how perfect he got it. Even the guys at the dyno shop who of course want to sell me their tune couldn't pick it apart. They said they "might" be able to free up 10 more horse power but for $650 no thanks im good!
__________________
2018 ZL1 1LE (daily driver on the nice days)
tomster is offline   Reply With Quote
Old 04-12-2014, 07:36 PM   #4
Baer383
 
Baer383's Avatar
 
Drives: 2013 ZL1 Ashen Gray
Join Date: Oct 2013
Location: Lawrenceville,Ga
Posts: 668
What #'s did you come up with?
__________________
I don't have to know everything,I just need to know,what I need to know,when I need to know it!

MODS, a lot of money,a lot of parts,a lot of time,a lot of patience.

754 RWHP 747 RWTQ 93 Octane


http://www.camaro5.com/forums/showthread.php?t=347243
Baer383 is offline   Reply With Quote
Old 04-12-2014, 08:00 PM   #5
Spartan01


 
Spartan01's Avatar
 
Drives: Evil Eva, 2010 2SS LS3
Join Date: Aug 2013
Location: Falls Church, Virginia
Posts: 3,603
Ted is the man.
I had a small issue with an order, Ted made sure I was taken care of, and made sure everything was good. He also builds bada$$ Camaros. Win win .
__________________
"You simply cannot trust quotes found on the internet." -Abraham Lincoln
Spartan01 is offline   Reply With Quote
Old 04-12-2014, 08:06 PM   #6
tomster
RedLine
 
tomster's Avatar
 
Drives: 2018 "hyper blue" ZL1 1LE
Join Date: Dec 2012
Location: St Louis area
Posts: 640
565 hp at 6200 It was still climbing but thats as high as they would take it.
518 torque @ 4300
__________________
2018 ZL1 1LE (daily driver on the nice days)
tomster is offline   Reply With Quote
Old 04-12-2014, 08:07 PM   #7
Baer383
 
Baer383's Avatar
 
Drives: 2013 ZL1 Ashen Gray
Join Date: Oct 2013
Location: Lawrenceville,Ga
Posts: 668
Quote:
Originally Posted by tomster View Post
565 hp at 6200 It was still climbing but thats as high as they would take it.
518 torque @ 4300
__________________
I don't have to know everything,I just need to know,what I need to know,when I need to know it!

MODS, a lot of money,a lot of parts,a lot of time,a lot of patience.

754 RWHP 747 RWTQ 93 Octane


http://www.camaro5.com/forums/showthread.php?t=347243
Baer383 is offline   Reply With Quote
Old 04-12-2014, 11:31 PM   #8
CAM....ZL1

 
CAM....ZL1's Avatar
 
Drives: 2012 ZL1
Join Date: Feb 2012
Location: BENTON, IL.
Posts: 1,036
We'll you might as well add me to the list of satisfied patrons .
Ted also tuned my Z With his 100 RWHP package.
Ted is not the first tuner I have used, but he will be the last. Ask him a question or send him a Data log, no matter what you need Ted is the man. The response time from JRE is 2nd to none. I would of never found him without this forum, so glad I did
CAM....ZL1 is offline   Reply With Quote
Old 04-13-2014, 05:30 PM   #9
ninsecgt
 
Drives: 2013 zl1
Join Date: May 2013
Location: miami, fl
Posts: 197
Lightbulb Ted moves to Miami

Quote:
Originally Posted by CAM....ZL1 View Post
We'll you might as well add me to the list of satisfied patrons .
Ted also tuned my Z With his 100 RWHP package.
Ted is not the first tuner I have used, but he will be the last. Ask him a question or send him a Data log, no matter what you need Ted is the man. The response time from JRE is 2nd to none. I would of never found him without this forum, so glad I did
Could y'all send TED to Miami fl because I'm in need of a good tuner who can reign in a set of id 850 ID injectors to behave like stock. I have a 2.55 pulley and a k & n drop in filter. On nitrous (100 shot) all things are fine but off nitrous the car has drivability issues. The car was tuned by torq. Speed lab in miramar fl and I've sent it back on one occasion to resolve the issue. Needless to say its time to throw in the towel on torq. I've heard a lot of positive things about redline peformance too but not sure who's the best. Any advice would be helpful.

Last edited by ninsecgt; 04-13-2014 at 05:31 PM. Reason: Additional info
ninsecgt is offline   Reply With Quote
Old 04-13-2014, 06:26 PM   #10
CAM....ZL1

 
CAM....ZL1's Avatar
 
Drives: 2012 ZL1
Join Date: Feb 2012
Location: BENTON, IL.
Posts: 1,036
Quote:
Originally Posted by ninsecgt View Post
Could y'all send TED to Miami fl because I'm in need of a good tuner who can reign in a set of id 850 ID injectors to behave like stock. I have a 2.55 pulley and a k & n drop in filter. On nitrous (100 shot) all things are fine but off nitrous the car has drivability issues. The car was tuned by torq. Speed lab in miramar fl and I've sent it back on one occasion to resolve the issue. Needless to say its time to throw in the towel on torq. I've heard a lot of positive things about redline peformance too but not sure who's the best. Any advice would be helpful.

I have ID 850's and he tunes them at his shop then emails it to you, you data log, email him the logs and follow his instructions. Jannetty racing.com, give him a call he can help.
CAM....ZL1 is offline   Reply With Quote
Old 04-13-2014, 07:39 PM   #11
ninsecgt
 
Drives: 2013 zl1
Join Date: May 2013
Location: miami, fl
Posts: 197
Injector tuning issue

Quote:
Originally Posted by CAM....ZL1 View Post
I have ID 850's and he tunes them at his shop then emails it to you, you data log, email him the logs and follow his instructions. Jannetty racing.com, give him a call he can help.
Thanks, I will give ted a call
ninsecgt is offline   Reply With Quote
Old 04-13-2014, 07:41 PM   #12
Cat988h
 
Cat988h's Avatar
 
Drives: Rally yellow 2011 Camaro 1SSRS
Join Date: Apr 2012
Location: Parksville Bc
Posts: 264
__________________
ATI Super Damper, Katech C5R Chain, Jannetty 470 Comp Cam, Comp Valve Springs, Mellings Oil Pump, Manley Push Rods, Comp Tringion Upgrade, Cold Air Inductions Intake, 1-7/8 American Racing Headers w Cats, MBRP 3 Inch Exhaust, RX Catch Can, Eaton Tru Trac, 3.91 OEM, DSS Drive And Half Shafts, LPW Diff Cover,3 Inch Noweeds, Amsoil Z-Rod, Tuned by Jannetty Racing
Cat988h is offline   Reply With Quote
Old 04-13-2014, 07:46 PM   #13
axis
Search Ninja
 
axis's Avatar
 
Drives: 2010 Black 2SS/RS A6
Join Date: Oct 2009
Location: Central Ark
Posts: 7,185
Quote:
Originally Posted by ninsecgt View Post
Could y'all send TED to Miami fl because I'm in need of a good tuner who can reign in a set of id 850 ID injectors to behave like stock. I have a 2.55 pulley and a k & n drop in filter. On nitrous (100 shot) all things are fine but off nitrous the car has drivability issues. The car was tuned by torq. Speed lab in miramar fl and I've sent it back on one occasion to resolve the issue. Needless to say its time to throw in the towel on torq. I've heard a lot of positive things about redline peformance too but not sure who's the best. Any advice would be helpful.
You can call Matt at FSP. He's got these tunes down.
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed
GPI modded intake manifold
Bo (knows) White ported TB
Kooks LT's/ Dynomax VT
Pfadted (springs/sways)
Dyno tuned by Rhino and GPI

I once parallel parked a train.
axis is offline   Reply With Quote
Old 04-13-2014, 08:00 PM   #14
jessrayo
Speed Freak
 
jessrayo's Avatar
 
Drives: 2013 ZL1 Camaro, 2016 Camaro SS
Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
Quote:
Originally Posted by ninsecgt View Post
Could y'all send TED to Miami fl because I'm in need of a good tuner who can reign in a set of id 850 ID injectors to behave like stock. I have a 2.55 pulley and a k & n drop in filter. On nitrous (100 shot) all things are fine but off nitrous the car has drivability issues. The car was tuned by torq. Speed lab in miramar fl and I've sent it back on one occasion to resolve the issue. Needless to say its time to throw in the towel on torq. I've heard a lot of positive things about redline peformance too but not sure who's the best. Any advice would be helpful.
I don't know how readily available you keep the nitrous but I actually have a hand loader that has a separate tune for with nitrous and other tunes for without. AFR's are different with nitrous and really the "optimum" tune with nitrous has to be different than the tune without. If you want it readily available at all times you just have to run a compromise tune that is not the best in either condition. Based on other member input on this forum I would look at one of the guys I list below for a nitrous tune.

If you could get up to Bradenton you need to talk to Matt Sorian at FSP. There have been several difficult cars on this forum he has fixed up. I've never heard a bad word about him and there are not many that can say that. 941-756-7223 is Matt's number. I don't think Redline will do you wrong either. Good luck.
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq

2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date.
jessrayo is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:23 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.