11-19-2018, 02:01 PM | #1 |
SS
|
font fender flare question
I am looking at three options
1 Anderson Composites ss fender carbon fiber, flares it 6mm 2 these add on fender flares in link and 3 just making my own from the same material that zl1add-ons uses and which I have on currently and extending it up another 6 " and out a 1/4 inch my front poke isnt to bad but I think I may need a little more coverage If you have installed fenders,is it a tough go ? If you have ran the dura flex extensions do they fit right? how much do they stick out? and does anyone know what the material is? that black plastic used for rock guards? tons of questions lots of time thanks! https://www.extremedimensions.com/20...s-2-Piece.html
__________________
CCW sp16a track set, BTR stage 3 cam and kooks longtubes with high flow catsLocks@7.5 degrees castor and radius arm inserts, Ride Tech 2coilovers JDP upper control arm bushings BMR lower knuckle bushing Bo White throttle body3.91 gears Spohn del-sphere toe link and trailing arms Prothane subframe bushings
|
11-19-2018, 02:05 PM | #2 |
SS
|
here are the wheels I am fitting
__________________
CCW sp16a track set, BTR stage 3 cam and kooks longtubes with high flow catsLocks@7.5 degrees castor and radius arm inserts, Ride Tech 2coilovers JDP upper control arm bushings BMR lower knuckle bushing Bo White throttle body3.91 gears Spohn del-sphere toe link and trailing arms Prothane subframe bushings
|
|
|
|
|