10-13-2016, 10:08 AM | #1 |
Drives: Camaro 6g, Corvette GrandSport 17 Join Date: Oct 2016
Location: Bratislava - Slovakia
Posts: 1
|
Z/28 - EU homologation
Hello.. im looking for solution. I would love to get z/28 but first i need to know if there is anyone that went thru EU homologation of this car.
Do you know if it is possible to switch lights with classic EU spec. E lights ? If they fit from "classic" EU spec Camaro. I know there is still problem with wiring but i hope you guys can help me get it done. Thank you, and sorry if there is any thread with this kind of problem. |
10-13-2016, 10:20 AM | #2 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
if people in Australia can make a right hand drive Camaro 5th gen and make everything work, this issue shouldn't be a big problem. With the Z/28, nothing is special about the body panels near the lights so Euro spec lights with the amber turn signals and such should be a direct fit. It appears after a quick google search the SS/ZL1 lights with the LED panels are Euro spec.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
10-14-2016, 04:07 AM | #3 |
Drives: . Join Date: Jun 2012
Location: Surrey
Posts: 103
|
I imported my Z/28 to Luxembourg via a specialist US car importer and had it registered here - only minor changes required I recall
|
10-14-2016, 05:36 AM | #4 |
Check the UK regional threads. They have a bunch of Camaros in the U.K. Both EU and US spec cars. They've written about the process several times.
Good luck
__________________
No longer stock, but oooh so much more fun!
|
|
10-14-2016, 09:38 AM | #5 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
Any thing you want can be done, we have all ZL1 headlights and tail lights on the shop Z/28
|
09-03-2018, 06:32 AM | #6 |
Drives: N/A Join Date: Apr 2016
Location: Sweden
Posts: 44
|
Just installed Eur.spec LED taillights on my Z/28 with a harness from Gen5 DIY. Rear light, turnsignals, brake and reverse works fine. But when I turn the hazard flash on it flashes the brakelights instead of the amber turnsignals. Was hoping it was basically plug and play, but seems I will be spending some more time in the shop with this. Also the right hand turn signal flashes rapidly, might just be the resistor that is broken?
|
09-05-2018, 01:25 AM | #7 |
Drives: 15 Z/28 #605 Join Date: Aug 2017
Location: Germany
Posts: 47
|
Hi Jberg805,
have you used a trailer module to divide the combined turn-brake-sinal ? Unfortunately will not work You can find my experiences in that topic from post #31 onwards: https://www.camaro5.com/forums/showt...=europe&page=3 |
09-05-2018, 01:48 AM | #8 |
Drives: N/A Join Date: Apr 2016
Location: Sweden
Posts: 44
|
I’ve been looking for that post.. thank You
|
|
|
Tags |
europe, homologation, z/28 |
|
|