07-01-2009, 12:53 PM | #1 |
formerly "wh0rsep0wer"
Drives: 2016 1SS Summit White Join Date: Oct 2008
Location: Myrtle Beach, SC
Posts: 489
|
Rear View Mirror Rattling After Sub Install- UPDATED W/ DIAGNOSIS
****UPDATE****
After messing with it a little more I found out the rattle is coming from the little plastic tab on the bottom of the mirror that moves it to the "dim" position (1SS - don't have the auto-dimming mirror.) I'm going to put some adhesive felt on that tab when I get home and should take care of it! Just wanted to give an update in case someone else has a mirror rattle they can't figure out. So I just installed my subwoofer last night (JL 10W3V2 being pushed by an MTX 421D - 300W RMS) - and even at low volumes I get a terrible rattle from my rear-view mirror. .Never had it before the sub because I guess the stock (non BA) system didn't produce low enough frequencies to make it rattle. Anyone else with a sub have this problem? Anyone know a good fix for it? Everything I've read suggests opening up the mirror and putting dynamat or some kind of foam in the mirror housing...and I'm not really cool with that. Would this be considered warranty worthy? (I mean...the rattle is really loud).
__________________
2010 1SS/RS - CGM/Gray Interior - M6 (SOLD) Kooks 1 7/8" headers, Solo Mach-X, Vararam.
2012 2LS - Black A6 (SOLD) 2016 1SS Summit White A8 Last edited by Camar0wn3d; 07-22-2009 at 03:17 PM. |
07-01-2009, 01:05 PM | #2 |
|
Wouldn't think it's covered under warranty, unless it was loose to begin with. And if you're looking to rattle loose your interior roof linings while bouncing quarters off the roof, that wouldn't be covered, either..
|
07-01-2009, 01:10 PM | #3 |
formerly "wh0rsep0wer"
Drives: 2016 1SS Summit White Join Date: Oct 2008
Location: Myrtle Beach, SC
Posts: 489
|
I know. I'll put wheel weights on the mirror and fix the problem Brembo-style.
__________________
2010 1SS/RS - CGM/Gray Interior - M6 (SOLD) Kooks 1 7/8" headers, Solo Mach-X, Vararam.
2012 2LS - Black A6 (SOLD) 2016 1SS Summit White A8 |
07-01-2009, 02:39 PM | #4 |
Drives: 2010 2SS IOM\IOM Join Date: Jul 2008
Location: NJ
Posts: 163
|
seems normal to me. Never had a car that DIDN'T Rattle with a sub.
|
07-01-2009, 06:23 PM | #5 |
Drives: 2017 2SS 50th on order.. Join Date: Jun 2009
Location: Quebec, QC
Posts: 176
|
That is to be expected, however it should only happen at high volume. If you are seeing the rattle at low volume, check for deficiencies in the mirror and its installation, i.e. anything loose. I have a 10" clarion sub in my SUV and my rear mirror dances to the low frequencies everytime I crank it up, btw I do have dynamat everywhere in the doors and rear panels. Its all good, awsome sound.
|
07-02-2009, 07:55 AM | #6 |
Drives: 99 Grand Prix Join Date: Jul 2007
Location: Toronto
Posts: 334
|
check the plastic clip that covers the wires behind the mirror, seems like it could rattle
check out this thread for some good pics http://www.camaro5.com/forums/showth...ar+view+mirror |
07-02-2009, 07:59 AM | #7 | |
Drives: 2010 Camaro, 2SS/RS Join Date: May 2009
Location: King George, Va
Posts: 881
|
Quote:
__________________
2010 2SS/RS CGM American Racing Headers, Magnaflow axle back, Roto-Fab CAI, Audio Integrations Sub box, Alpine Type R 10, Alpine MRP-500 amp, Pro Clips iPhone Mount |
|
07-02-2009, 09:29 AM | #8 |
Drives: 2010 Victory Red 2SS/RS M6 Join Date: Jan 2009
Location: Prince George, VA/Lexington, KY
Posts: 586
|
Buddy if your system knocks then this is gonna happen.
I had 2 Memphis M3s (400RMS) and those suckers will knock. You get used to it. I can even identify most car makes and models with a shaky mirror. lol
__________________
|
07-22-2009, 03:18 PM | #9 |
formerly "wh0rsep0wer"
Drives: 2016 1SS Summit White Join Date: Oct 2008
Location: Myrtle Beach, SC
Posts: 489
|
Figured out the problem...updated in the original post. This only should apply to 1SS mirrors.
__________________
2010 1SS/RS - CGM/Gray Interior - M6 (SOLD) Kooks 1 7/8" headers, Solo Mach-X, Vararam.
2012 2LS - Black A6 (SOLD) 2016 1SS Summit White A8 |
05-15-2011, 05:50 PM | #10 |
Mine actually rattled the mirror bolt lose I had to tighten it. Anyone have a way to keep the mirror from rattleing so bad that it ends up facing the floor instead of behind me where I need it? XD
__________________
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
V8 Camaro Performance Upgrades List | Milk 1027 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 93 | 08-30-2021 05:56 PM |
V6 Camaro Performance Upgrades | rtcat600man | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 387 | 09-19-2019 06:53 PM |
Rear View Camera | VenomZ302 | 5th Gen Camaro SS LS LT General Discussions | 65 | 05-29-2011 01:55 PM |
New Member concerned about rear seat view | speedtrip | 5th Gen Camaro SS LS LT General Discussions | 4 | 03-20-2009 10:39 AM |
Which view do you like the best? | GOLDDOG | 5th Gen Camaro SS LS LT General Discussions | 39 | 03-11-2009 08:09 AM |