03-15-2024, 09:02 PM | #1 |
Drives: 2005 C6, 2013 ZL1 2020 Ram Cummins Join Date: Jul 2015
Location: Sugar Land, Texas
Posts: 199
|
ZL1 ECM flex fuel
Posting here for better visibility vs the ZL1 section.
Which plug on ECM is the correct one to pin the flex fuel sensor into? There are three plugs on the ZL1. Also which pin location is it? The DSX kit is saying pin 5 but I've seen conflicting info. Thank you. |
03-15-2024, 10:39 PM | #2 |
Drives: 2005 C6, 2013 ZL1 2020 Ram Cummins Join Date: Jul 2015
Location: Sugar Land, Texas
Posts: 199
|
I answered my own question after some digging. Leaving the post up for others.
The ZL1 has three connectors on the E67 ECM. The correct connector is the one closest to the radiator with the blue backing plate and the correct pin is number 5, as instructed by DSX. |
|
|
|
|