Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Jason 98 TA
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 01-27-2014, 12:53 AM   #1
caper

 
Drives: 2010 IOM 2ss/RS
Join Date: Sep 2009
Location: SoCal, I.E.
Posts: 1,449
was on it a bit and check engine light starts blinking along with stabilitrack

the lights went out within a couple seconds but I still pulled 4 codes
p013e
p013f both from no cats I suppose...but I also got
p0300 random misfire
p0502 vehicle speed sensor a circuit low input

these 2 have me worried especially the misfire...any ideas?? I can tell you the car stalls a bit , the idle is rough in the tune, can be difficult to pull away at times.

I cleared the codes, just to see if they will return tomorrow...anything I should be lookin at in the meantime? car seems to run ok although I have noticed some hesitation doing 3rd gear WO pulls at times...it (like the code) is random...
__________________
Turbonetics running 8lbs boost at 563/559 tuned by Cunningham installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter
caper is offline   Reply With Quote
Old 01-27-2014, 01:10 AM   #2
Modern07
Mid-Florida Camaro Club
 
Modern07's Avatar
 
Drives: 2019 ZL1 on Order
Join Date: Jan 2011
Location: Heathrow, FL
Posts: 3,134
was on it a bit and check engine light starts blinking along with stabilitrack

Could be a bad MAF sensor, I was having similar issues and that was one thing we were going to look at - mine turned out to be cat failure but you say you have no cats

Misfire could also be bad spark plug so worth checking them
__________________
Modern07 is offline   Reply With Quote
Old 01-27-2014, 01:14 AM   #3
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,801
Sounds like a misfire to me. I had some misfiring issues, and the stabilitrak light is the red flag for that specific problem. Change to a warmer plug or have your tune tweaked. I swapped plugs and it remedied the problem.
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 01-27-2014, 04:56 PM   #4
caper

 
Drives: 2010 IOM 2ss/RS
Join Date: Sep 2009
Location: SoCal, I.E.
Posts: 1,449
Ok, So I'm Going To Change My Plugs, And Check wires, AWell As Look AtThe Catch Can SetUp For Vacuum Leaks. After That I'll Be Lost.

Any Ideas On The Other Code? I Did A search And Didn't Find Anything
__________________
Turbonetics running 8lbs boost at 563/559 tuned by Cunningham installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter
caper is offline   Reply With Quote
Old 01-27-2014, 07:00 PM   #5
Slowhawk
 
Drives: 1999 Trans Am
Join Date: Jul 2009
Location: Bridgewater,Ma
Posts: 1,974
Best is to have the tuner scan over the tune while driving and see if he see's any bad sensors. Thats the quickest to diagnos the proglem.
Slowhawk is offline   Reply With Quote
Old 01-28-2014, 06:52 PM   #6
Kelly@PCMofNC

 
Drives: 2010 RS/SS
Join Date: Dec 2010
Location: Mooresville, NC
Posts: 913
Quote:
Originally Posted by caper View Post
the lights went out within a couple seconds but I still pulled 4 codes
p013e
p013f both from no cats I suppose...but I also got
p0300 random misfire
p0502 vehicle speed sensor a circuit low input

these 2 have me worried especially the misfire...any ideas?? I can tell you the car stalls a bit , the idle is rough in the tune, can be difficult to pull away at times.

I cleared the codes, just to see if they will return tomorrow...anything I should be lookin at in the meantime? car seems to run ok although I have noticed some hesitation doing 3rd gear WO pulls at times...it (like the code) is random...
If you aren't able to take the car back to the tuner for a quick diagnosis, I'd start by checking out the spark plugs - especially if you're having a rough idle and it's having trouble getting going!
__________________

Kelly - sales@pcmofnc.com - 704-307-4227 www.pcmofnc.com
Kelly@PCMofNC is offline   Reply With Quote
Old 01-30-2014, 12:14 AM   #7
caper

 
Drives: 2010 IOM 2ss/RS
Join Date: Sep 2009
Location: SoCal, I.E.
Posts: 1,449
so plugs are changed, no issues with that wires or any vacuum leak that I seen. I haven't reset a code since I cleared them, but I just got back to WOT tonight after the plugs...the hesitation at WOT in 3rd is still there with what sounds like a bit of backfiring. 2nd gear sounds and pulls fine. still no code though. ill be trying to get it to my tuner soon. in the meantime I will be staying out of boost :( . any other ideas?
__________________
Turbonetics running 8lbs boost at 563/559 tuned by Cunningham installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter
caper is offline   Reply With Quote
Old 01-30-2014, 06:53 AM   #8
BiggFoot

 
BiggFoot's Avatar
 
Drives: 2010 Camaro (M6) 900+ HP SBE
Join Date: Jun 2011
Location: Houston
Posts: 1,257
Original battery in the car? I started getting some weird codes and was advised to change the battery so I did and . . . no more codes. I know that sounds weird but it worked. Probably wouldn't explain your 3rd gear hesitation though if you havent changed the battery, it's about time anyway. Just sayin

GL on fix and please keep us posted.
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag restriction limited to 16-17 psi
Blower Cam
Brodix BP BR 3 Heads
Kooks LT Headers and full 3" exhaust
Fore Twin Pump Fuel System with ID 1700X Injectors - E85 conversion

DSS 9” Conversion (axles, driveshaft, pumpkin) & Strange 3.70 gears
McLeod RXT Twin HD Clutch & Upgraded Slave
RPM Level VII
TR6060
BMR Drag Suspension Package w/Strange shocks
Carlyle 15" and M/T ET Street R radials
10.1 @ 143 mph 1/4 mile


BiggFoot is offline   Reply With Quote
Old 01-30-2014, 09:41 AM   #9
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,801
Try turning all the lights on, then disconnecting the battery, it'll drain the system. Then turn everything off and hook the battery back up.
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 02-19-2014, 10:01 PM   #10
caper

 
Drives: 2010 IOM 2ss/RS
Join Date: Sep 2009
Location: SoCal, I.E.
Posts: 1,449
so I wanted to update this. after changing the plugs and not helping. I took it down to Cunningham and they took a look at it and determined I needed a set of FIC850 . so in they went, ive been into it since and no code, car runs better as well. also picked up a few ponies to 563 and a few mpg. not the cheapest fix but I am happy with the results.
__________________
Turbonetics running 8lbs boost at 563/559 tuned by Cunningham installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter
caper is offline   Reply With Quote
Old 02-19-2014, 10:27 PM   #11
Bo White


 
Bo White's Avatar
 
Drives: 2010 Summit White 1SS
Join Date: Feb 2012
Location: Vance Alabama
Posts: 6,967
What were in it?
Bo White is offline   Reply With Quote
Old 02-20-2014, 01:41 AM   #12
caper

 
Drives: 2010 IOM 2ss/RS
Join Date: Sep 2009
Location: SoCal, I.E.
Posts: 1,449
the 62lb ones that came in the kit
__________________
Turbonetics running 8lbs boost at 563/559 tuned by Cunningham installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter
caper is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:36 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.