09-18-2018, 09:59 PM | #1 |
Drives: Beginning a search to buy Join Date: May 2017
Location: Indiana
Posts: 42
|
How to get a mirror shine ?
I am continuously amazed at many of the photos showing cars with a mirror shine. I’ve only used liquid or paste wax hand applied and removed with a cloth. I read of using a clay, of buffing, and other methods of obtaining a deep lustre.
Hoping to hear opinions on best method(s) of maintaining the exterior of my 2011 Synergy. The car is washed with regularity and stored in my garage with a car cover. I’m reluctant to try my hand at using a buffer in fear that I would accidentally burn the paint. Thanks in advance. |
09-18-2018, 10:13 PM | #2 |
Ret AF, cancer survivor
Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015
Location: Mesquite, NV
Posts: 2,741
|
Here's the annual schedule/system I use (everything is done by hand, no buffer):
Jan - Wash, clay bar and paste wax Jun - Wash and paste wax Every other week, after a road trip or when needed sooner - wash followed by a detailing. Have used this method for years and have been able to maintain mirror-like finishes on all my vehicles. Also, have used a variety of brands over the years as well, to include Zaino, Griiots, Adams, etc. etc.. For the past 2 years I've been using the Meguiars ultimate line of products with great results (plus I can everything I need from my local AutoZone).
__________________
|
09-18-2018, 10:47 PM | #3 |
Drives: 2017 1SS auto vert Nightfall Gray Join Date: Jan 2017
Location: Central Coast, CA
Posts: 666
|
Adams, Mother’s, Meguiar’s all have detailing kits with pads and products. The buffers are low speed and you don’t apply much pressure. Just keep moving it around
Sent from my iPhone using Tapatalk |
09-18-2018, 11:15 PM | #4 | |
Account Suspended
Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017
Location: California
Posts: 1,694
|
Quote:
|
|
09-18-2018, 11:32 PM | #5 |
Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011
Location: Trenton, Michigan
Posts: 7,047
|
|
09-19-2018, 06:28 AM | #6 |
Drives: 2011ss/rs camaro Join Date: Sep 2011
Location: florida
Posts: 1,261
|
Junkman videos on YouTube
__________________
. OBX LTH,Rotofab,Magnuson Heartbeat.AEM wideband, HP Tuners
|
09-19-2018, 06:50 AM | #7 |
Drives: 1991 Z/28 Convertible Join Date: Feb 2018
Location: Pittsburgh, PA
Posts: 411
|
Have you looked into ceramic coating?
|
09-19-2018, 06:50 AM | #8 |
Tri-County Camaro SWFL
|
Polishing is really where you get the mirror shine from.
Wash, clay, polish, seal and wax. I use Adams btw
__________________
|
09-19-2018, 06:58 AM | #9 |
Account Suspended
Drives: 2011 2SS/ RS INFERNO ORANGE L99 Join Date: Dec 2012
Location: Alliston Ontario Canada
Posts: 9,057
|
Give your car a good cleaning.. clay bar it and then a coat of quality wax.To get the next level shine get a bottle of Adams Ceramic Boost. Its the finish product they use to bring the ceramic coating to a shine. I've used it on all my vehicles. Believe me its the best kept secret in paint detail. Just don't tell anybody.
|
09-19-2018, 07:04 AM | #10 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
I agree with the above post. Wash, clay bar, polish, seal, and wax. I also use a glaze which makes dark colors really pop. You should check out the Adams detailing videos. They explain in detail the correct steps and the proper way to use their products. (The Junkman YouTube videos are great too.) Don't be afraid of using a orbital polisher.....this will give you the best results.
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
09-19-2018, 08:40 AM | #11 |
Drives: 2010 Camaro SS Join Date: Jul 2018
Location: Indiana
Posts: 544
|
I too have been wondering as well. Having had all different colors of cars over the years, this one has been by far the hardest one to find a wax/polish that I like. I’ve tried all mentioned above, but have not like how they are applied or removed. I purchased griiots “best of show” paste wax and am VERY impressed with how easy it goes on, is removed, and the quality of the shine on the finished product. I also use meguires quick detail for a quick touch up, or turtle wax “little black box” detailer. It is formulated for black cars and is a black liquid spray.
Another tip is to get a good quality microfiber buffing rag to remove the product.
__________________
2010 2SS/RS 6M, MGW flatstick, CAI cold air intake, SLP loudmouth 2 axleback, TSP 1 7/8 headers w/ hfc, pfadt 1" springs, SRP pedals, emblempros "6.2L" emblems on hood, ZL1 grill, M/T SC-5 wheels, nitto motivo 275f 315r. ZL1 addons wickerbill, smoked lenses, resonator delete x pipe, diode dynamics DRLs 1LE suede steering wheel, mighty mouse CC. SCTX4 and Dyno Steve tune.
|
09-19-2018, 08:41 AM | #12 |
Drives: 2002 Camaro SS SOM; 2015 Malibu LTZ Join Date: Dec 2010
Location: Queens, NY
Posts: 4,019
|
Essentially, you'll need to clay, then polish with one or a couple of polishes, which may include a swirl mark removal type polish and a paint cleaning polish. Clean the car of the polish residue, and then add the wax or sealant of your choice.
__________________
'02 CAMARO SS SOM; 5.7L LS1/FLS6B
'08 TBSS AWD Black Granite Metallic '15 Malibu LTZ 2LZ Turbo '14 CAMARO ZL1 Blue Ray Metallic |
09-19-2018, 08:51 AM | #13 |
old school chevy rodder
Drives: 2013 2SS/RS Manual,DM exhaust,CRT Join Date: Jul 2012
Location: Oregon
Posts: 5,588
|
Frankly I daily drive most of the year its in the rain, I don't have time to obsess over any imperfections, the tiny circular water spots are all I can see for imperfections with a shiny surface that gets complements no matter what...I use good old Nufinish a polymer and have used many products, but being able to just hit it with wax after about six months with mild wax job and not have to buff or struggle and have it bead water for over six months that's pretty good for a car that's in the weather constantly. BTW Nuvinyl ...just like Armor all...garbage works but I prefer Black magic it lasts longer and darkens better so it must protect better.
Just a shout out from a realist not a California guy with a garage; I live in the rain lots. and clay bar...great way to spend money and drag crap around scratching things buying more clay bar and then repairing the scratches by obsessing with a buffer and coat after coat of wax. People used to swear by Zaino, if obsessive I would go there. I do occasionally like to hit the windows with some rust and stain remover from Wink in the cleaner isle of a department/grocery store, it removes water stains on the glass. There are actually clear coats now that repel dirt only a couple grand.... I am happy I have my stripes as they are wax able.....American car craft, a great place to obsess for anything but especially under the hood SEMA dreamer...….
__________________
2021 Wild Cherry ZL1 A10, Sunroof, Data, Carbon, Nav, RotoFab Dry CAI, Elite x2, Borla ATK, Driveshaft shop
|
09-19-2018, 06:40 PM | #14 |
Drives: 2013 Camaro 2SS/RS Join Date: Jul 2016
Location: Salem, Or
Posts: 106
|
Get an orbital buffer and some Meguir's Ultimate Compound. There are no abrasives and Ultimate Compound is very mild so even if you're a beginner you will be safe. Ultimate compound will remove fine hairline scratches too. The clear coat on your Camaro's is very hard btw. This beats the heck out of a clay bar which is a ton of work and is much faster. After the paint/clear coat is exposed without oxidation you want to at least wax it or you can use a polish or glaze.
I personally use a wax called Collinite No.845. This wax is legendary on the internet because the shine is deep, excellent, easy to put on and remove and it will not stain black trim. This wax has a wet look to it. And the best part it lasts much longer than most any other wax I have used including Meguir's Ultimate wax which is a synthetic. Collinite No. 845 is easy to wipe off. Check out the reviews: https://www.amazon.com/Collinite-Liq...=collinite+845 The clay bar or using an orbital buffer with an orange pad and Meguir's Ultimate compound is very important because the base has to be perfect before you put polish or wax on. Once the wax is on you can buff it for the maximum shine. If the paint is exposed it will start oxidizing quickly depending on where you live. Polish or glaze then a wax have worked best for me. It's a lot of work but if you keep it waxed you will save yourself much work. You will now get compliments all the time by everybody! |
|
|
Thread Tools | |
|
|